Changes

Moar info
Line 32: Line 32:     
4) weld it back together! make sure that hole on the rear is rotated towards the ground.
 
4) weld it back together! make sure that hole on the rear is rotated towards the ground.
 +
 +
*its critical to leave that rear cone section as described in the wiki. If ya leave that rear cone out it'll be super loud and slow. Gotta keep the sound waves in there to bounce back to the cylinder. The resulting chamber doesn't have the best performance and it might actually be better if you weld 2 or 4 of the rear cone's holes shut before ya weld it all back together.
    
[[Category: Tomos]]
 
[[Category: Tomos]]