Changes

nearly done...
Line 24: Line 24:  
== plan B ==
 
== plan B ==
 
1) cut just behind the rear heat shield mount
 
1) cut just behind the rear heat shield mount
 +
 
2) measure the distance to the plate inside
 
2) measure the distance to the plate inside
 +
 
3) add 3mm to that measurement and cut again
 
3) add 3mm to that measurement and cut again
 +
 
4) weld it back together! make sure that hole on the rear is rotated towards the ground.
 
4) weld it back together! make sure that hole on the rear is rotated towards the ground.