Difference between revisions of "Puch Maxi hardware list"

From Moped Wiki
Jump to: navigation, search
(→‎Electrical: stator plate screws)
Line 21: Line 21:
 
*Woodruff key (E50) -- 3mm wide x 3.5mm tall
 
*Woodruff key (E50) -- 3mm wide x 3.5mm tall
 
*Woodruff key (ZA50) -- 3mm wide x 3.7mm tall
 
*Woodruff key (ZA50) -- 3mm wide x 3.7mm tall
 +
*Stator Plate Screws (E50) -- M4x12/16
  
 
==Engine/Transmission==
 
==Engine/Transmission==

Revision as of 12:58, 7 June 2010

Frame/Body Hardware

  • Seat Bolts -- M8x35 M8x40
  • Wire Hold -- M5 x 16
  • Front fender -- (2) M5x12, (4) M5x10
  • Handle Bar -- (4) M7x35
  • Swing Arm -- (4) M8x16
  • Kick Stand -- (3) M6x35
  • Rear Rack -- (2) M6x16
  • Cap Nuts -- (2) M8
  • Magura Clutch Lever Screw -- (1) M4x10

Suspension

  • Forks -- (2) M8x35
  • Rear Suspension -- (2) M8x30

Electrical

  • Ignition Coil -- (2) M5x20
  • Magneto Cover -- (2) M4x10
  • Flywheel nut (E50) -- M10 x 1.00 (pitch)
  • Woodruff key (E50) -- 3mm wide x 3.5mm tall
  • Woodruff key (ZA50) -- 3mm wide x 3.7mm tall
  • Stator Plate Screws (E50) -- M4x12/16

Engine/Transmission

  • Circlips -- 17×1 and 15×1 (a 9/16 inch circlip will work for the smaller circlip on the clutch side of the crank)
  • One speed engine case -- (8) M6x30, (5) M6x50
  • Two speed transmission case -- (2) M6x70, (4) M6x55. You may have pan head or countersunk bolts depending on your engine.
  • Clutch cover screws -- (4) M6×25
  • Engine mounts -- (2) M8x75, M8x90
  • Cylinder/cylinder head nuts -- (4) M6 x 1.00 (pitch)

Hardware Sources

If your local hardware store is lacking in the metric hardware department, try one of these sources.

  • Fastenal
  • Boltdepot.com - Local business just trying to do my part. Fast Shipping
  • Mcmaster.com - Also a great place to do business. They have almost everything you could ever want.


Hardware Tip: Many people like to replace the stock flat head screws with allen head bolts. These are more resistant to being stripped, and it's easier to get leverage to remove and re-tighten bolts with the allen wrenches than with a standard screwdriver. (An example from the forums).