Work in progress... Just setting up outline.
The goal of this guide is to outline the process of converting a stock moped electrical system to a LED system. A guide to safe and bright lights.
You blew it! Now what?
- Soldering Iron
- A way to remove the magneto
Pieces you need that your moped does not have
- Regulator / Rectifier - Not just a regulator, we will be converting the AC output of the magneto to DC for the LEDs. These can range the cheap $10 ones to the Trail Tech (7004-RR150) or higher. We will be using the Trail Tech (7004-RR150) in this guide.
- Headlight Lens - If you have a sealed headlight you will need to change to a replaceable bulb type, usually fits a 1156 BA15s bulb. If you have a changeable bulb lucky you.
- LEDs - You can find ones that fit in your current moped fixtures. Headlight bubs are usually a 1156 BA15s bulb. Taillights are usually a single 1157 BA15d bulb or two 63 BA15s bulbs. Check yours before you order.
Preparing the Stator
Requires complete removal of the stator.