Difference between revisions of "Korado Engine Differences"

m (formatting, removed some categories)
(add new pics)
Line 4: Line 4:
  
 
This is my engine type …notice that it is an E50 , but notice the direction of the gearing on the main shaft. This is from a Korado. Sometimes (but not always) the Korado engine like below will have 4 bearings instead of 3, but most come with 3. They also came in a kick-start model.
 
This is my engine type …notice that it is an E50 , but notice the direction of the gearing on the main shaft. This is from a Korado. Sometimes (but not always) the Korado engine like below will have 4 bearings instead of 3, but most come with 3. They also came in a kick-start model.
[[Image:Clip_image002.jpg]]
+
[[Image:Clip_image002.jpg|frame|left|Korado engine]]
 +
{{clr}}
  
 
This is from a 70’s era Puch E50. This engine was made in Austria and came on a regular [[Maxi]]. Notice the opposite gear pattern and the anti-clockwise rotation.
 
This is from a 70’s era Puch E50. This engine was made in Austria and came on a regular [[Maxi]]. Notice the opposite gear pattern and the anti-clockwise rotation.
[[Image:100_2821.JPG]]
+
[[Image:100_2821.JPG|frame|left|300px|Puch regular E50]]
 +
{{clr}}
 +
 
 +
A picture of the Korado transfers:
 +
[[Image:1371783626 4c69b79bb8.jpg|frame|left|Korado engine transfers]]
 +
{{clr}}
 +
 
 +
The Korado pedal start clutch:
 +
[[Image:IMG 5964.JPG|frame|left|Korado pedal start clutch]]
 +
{{clr}}
 +
 
 +
Korado kick/pedal start clutch bell:
 +
[[Image:IMG 5966.JPG|frame|left|Korado kick/pedal start clutch bell]]
 +
{{clr}}
 
   
 
   
 
[[Category: Puch]]
 
[[Category: Puch]]
 
[[Category: Performance Tuning]]
 
[[Category: Performance Tuning]]

Revision as of 21:07, 26 November 2008

It has all been figured out. I have an anti clockwise stator, BUT since the engine on my Maxi is from a Supermaxi ,or as its called here in the USA, a Korado, my stator plate turns clockwise.

My engine was manufactured in 1998, way after Puch was purchased by Piaggio. This engine was made by the Povazske strojarne company under the Puch name. there are a few key differences, the most major of them being that the internal main gears are cut in reverse, thus making the stator turn clockwise when the bike is pushed forward, the opposite of a regular E50.

This is my engine type …notice that it is an E50 , but notice the direction of the gearing on the main shaft. This is from a Korado. Sometimes (but not always) the Korado engine like below will have 4 bearings instead of 3, but most come with 3. They also came in a kick-start model.

Korado engine

This is from a 70’s era Puch E50. This engine was made in Austria and came on a regular Maxi. Notice the opposite gear pattern and the anti-clockwise rotation.

Puch regular E50

A picture of the Korado transfers:

Korado engine transfers

The Korado pedal start clutch:

Korado pedal start clutch

Korado kick/pedal start clutch bell:

Korado kick/pedal start clutch bell