Honda Z50J

The Honda Z50J refers to a popular motorcycle produced by Honda Motorcycles belonging to its Z Series family of mini bikes. It began production in 1973 for the European and Japanese markets. In its first few years of production, it was the same as its American counterpart, the Honda Z50A. But in 1978, when Honda dropped the Z50A from its American motorcycle lineup, the European Z50J continued to evolve until 1999. Fewer Z50J are being produced each year and are being sold only as limited editions.

Here is some info about monkeymodels which were sold in Finland. There may be some errors in writing due to my bad english.

Technical info

Brand and model	Honda Z50A/Z50J	Honda Z50J	Honda Z50J
Has been sold	1980–1986	1987–1991	1992–1999
Engine	Honda ABO2	Honda ABO2E	Honda ABO2E
Engine type	4-stroke	4-stroke	4-stroke
Cooling	air	air	air
Cylinder displacement	49cm³	49cm³	49cm³
Cylinder diameter	39mm	39mm	39mm
Length of shock	41,4mm	41,4mm	41,4mm
Compression ratio	8,8:1	10:1	10:1
Biggest power, kW/rpm	1,34/ -	1,55/6500	1,44/6500
Carburetor	Keihin PAO2B	Keihin PAO2C, 1991 Keihin PAO2D	Keihin PAO2E
Mainjet	Fixed	58 (1991 55)	58
Fueltank	5l	5l	4,5l
Clutch	Automatic	Wet multiplate	Wet multiplate
Gears	3	4	4
Ignitionsystem	Apiculate magneto	Electronic CDI	Electronic CDI
Voltage	6V	6V	6V
Preignition	Timingmark in flywheel "T"	Timingmark in flywheel "T"	Timingmark in flywheel "T"
Interrupters wing span	0,3-0,4mm	-	-
Sparkplug	NGK CR6HS or DENSO U20FSR-L	NGK C6HA or DENSO U20FS-L	NGK CR6HSA or DENSO U20FSR-U
Spark plugs wing span	0,6 - 0,7 mm	0,6 - 0,7 mm	0,6 - 0,7 mm
Battery, V/Ah	-	6/2	6/2
Length	1,315m	1,315m	1,315m
Wheelbase	90cm	90cm	90cm
Ground clearance	15cm	15cm	15cm
Frontwheel:
Size	3,50x8	3,50x8	3,50x8
Pressure	1 bar	1 bar	1 bar
Rearwheel:
Size:	3,50x8	3,50x8	3,50x8
Pressure	1,75 bar	1,75 bar	1,7 bar
Sparkplugs tensioningmomentum	-	9-12 Nm	-
Cylinder heads tensioningmomentum	9-12 Nm	12 Nm	9-12 Nm