Difference between revisions of "Honda PA Replacement Parts"

m
 
 
(10 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
=Replacement Parts=
 
=Replacement Parts=
  
=="V" Belt==
+
A number of parts remain available - but - it seems that not all local Honda shops can get them. Try these sources:
 
 
Courtesy of [http://www.itslookingup.com/moped/pa50/tyskpa50.htm http://www.itslookingup.com/moped/pa50/tyskpa50.htm]
 
 
 
* The OEM belt length measured on the top side (outside diameter) is 41 inches (104.14 centimeters)
 
* The top and sides of the OEM belt (width) each measures 19/32 inch.
 
* The bottom width of the OEM belt measures 11/32 inch.
 
 
 
{| border=1
 
! Source !! Model !! Approx. Price !! Comments
 
|-
 
| Mitsuboshi (OEM) || 23100-148-7030 || $60.00 || Available via Honda dealers
 
|-
 
| Dayco || #17415 ''or''<br>13A055 || $12.00 || It is a 41.5" belt, slightly larger than stock
 
|}
 
 
 
==Spark Plugs==
 
  
Courtesy of [http://www.itslookingup.com/moped/pa50/tyskpa50.htm http://www.itslookingup.com/moped/pa50/tyskpa50.htm]
+
[http://www.westernhillshondayamaha.com Western Hills Honda Yamaha]
  
* PA50 1978 to 1981 (Gap 0.024 to .028")
+
[http://www.temeculamotorsports.com Temecula Motor Sports]
**NGK BPR-6HS (OEM)
 
**Champion RL86C or L86C
 
**ND W20FPR
 
* PA50 1982 to 1983 (Gap .030")
 
**NGK BPR-6HS (OEM)
 
**Champion RL87YC or L87YC
 
**ND W20FPR
 
* Optional per Owner's Manual (all years): BPR-5HS
 
  
Note, the 1983 official factory manual from Honda does specifies resistor-type plugs. It has been reported that other years' manuals do not specify resistor-type plugs. Therefore, the correct spark plugs are NGK BP6HS, BP5HS, and ND W20FP. --mishan
+
[http://www.ebay.com Ebay]
  
 
==CDI Unit==
 
==CDI Unit==
Line 64: Line 40:
 
*1985
 
*1985
 
**NH80 Aero
 
**NH80 Aero
 +
 +
==Head Light==
 +
 +
DrATV.com has a headlight with a replaceable bulb.  [http://dratv.stores.yahoo.net/nchewirebu.html Headlight link]
 +
 +
==Pet Cock==
 +
 +
DrATV.com has a petcock.  [http://dratv.stores.yahoo.net/pa50petcock.html Petcock linlk]
 +
 +
==Spark Plugs==
 +
 +
Courtesy of [http://www.itslookingup.com/moped/pa50/tyskpa50.htm http://www.itslookingup.com/moped/pa50/tyskpa50.htm]
 +
 +
* PA50 1978 to 1981 (Gap 0.024 to .028")
 +
**NGK BPR-6HS (OEM)
 +
**Champion RL86C or L86C
 +
**ND W20FPR
 +
* PA50 1982 to 1983 (Gap .030")
 +
**NGK BPR-6HS (OEM)
 +
**Champion RL87YC or L87YC
 +
**ND W20FPR
 +
* Optional per Owner's Manual (all years): BPR-5HS
 +
 +
Note, the 1983 official factory manual from Honda does specifies resistor-type plugs. It has been reported that other years' manuals do not specify resistor-type plugs.  Therefore, the correct spark plugs are NGK BP6HS, BP5HS, and ND W20FP. --mishan
 +
 +
=="V" Belt==
 +
 +
Courtesy of [http://www.itslookingup.com/moped/pa50/tyskpa50.htm http://www.itslookingup.com/moped/pa50/tyskpa50.htm]
 +
 +
* The OEM belt length measured on the top side (outside diameter) is 41 inches (104.14 centimeters)
 +
* The top and sides of the OEM belt (width) each measures 19/32 inch.
 +
* The bottom width of the OEM belt measures 11/32 inch.
 +
 +
{| border=1
 +
! Source !! Model !! Approx. Price !! Comments
 +
|-
 +
| Mitsuboshi (OEM) || 23100-148-7030 || $60.00 || Available via Honda dealers
 +
|-
 +
| Dayco || #17415 ''or''<br>13A055 || $12.00 || It is a 41.5" belt, slightly larger than stock
 +
|-
 +
| Goodyear || 17425 13AV1080|| $16 || Available at Shucks Autozone Carquest
 +
|}
 +
*I have tried the Dayco belt, and it does work.  However, after a few hundred miles, the belt wore out.  I suspect that the belt angle (the angle of the "V") is slightly different.  The point --> don't expect a long life with this alternate belt.
 +
 +
 +
Cheapest BX40 belts I've found..... http://www.vbeltsupply.com/ecommerce/bx40.html  Just got the order today so can't comment on reliability.  Also, huge shipping discounts with multiple orders, so get some friends to buy some with you.
 +
 +
==Exhaust Gasket==
 +
 +
I don't buy Honda parts - I just go to ebay for these.  I usually do a search for "50" and "exhaust gasket".  As long as the gasket is copper and about 1-1/4" across, it will usually work.  Here's a pic from ebay:
 +
 +
[[Image:exhaust gasket for PA50.jpg]]
 +
 +
{{Honda PA50}}
 +
[[Category: Honda|PA]]

Latest revision as of 09:27, 9 March 2012

Replacement Parts

A number of parts remain available - but - it seems that not all local Honda shops can get them. Try these sources:

Western Hills Honda Yamaha

Temecula Motor Sports

Ebay

CDI Unit

The following CDI Units, from other Honda's will fit and work in your Hobbit:

  • 1981
    • NA50 Express II
    • NC50 Express
    • NX50M Express
    • PA50II
  • 1982
    • NC50 Express
    • NU50 Urban Express
    • NU50M Urban Express Deluxe
    • NX50M Express
    • PA50II
  • 1983
    • NC50 Express
    • NU50 Urban Express
    • NU50M Urban Express Deluxe
    • PA50II
    • NH80 Aero
  • 1984
    • NN50 Gyro
    • NH80 Aero
    • NH125 Aero
  • 1985
    • NH80 Aero

Head Light

DrATV.com has a headlight with a replaceable bulb. Headlight link

Pet Cock

DrATV.com has a petcock. Petcock linlk

Spark Plugs

Courtesy of http://www.itslookingup.com/moped/pa50/tyskpa50.htm

  • PA50 1978 to 1981 (Gap 0.024 to .028")
    • NGK BPR-6HS (OEM)
    • Champion RL86C or L86C
    • ND W20FPR
  • PA50 1982 to 1983 (Gap .030")
    • NGK BPR-6HS (OEM)
    • Champion RL87YC or L87YC
    • ND W20FPR
  • Optional per Owner's Manual (all years): BPR-5HS

Note, the 1983 official factory manual from Honda does specifies resistor-type plugs. It has been reported that other years' manuals do not specify resistor-type plugs. Therefore, the correct spark plugs are NGK BP6HS, BP5HS, and ND W20FP. --mishan

"V" Belt

Courtesy of http://www.itslookingup.com/moped/pa50/tyskpa50.htm

  • The OEM belt length measured on the top side (outside diameter) is 41 inches (104.14 centimeters)
  • The top and sides of the OEM belt (width) each measures 19/32 inch.
  • The bottom width of the OEM belt measures 11/32 inch.
Source Model Approx. Price Comments
Mitsuboshi (OEM) 23100-148-7030 $60.00 Available via Honda dealers
Dayco #17415 or
13A055
$12.00 It is a 41.5" belt, slightly larger than stock
Goodyear 17425 13AV1080 $16 Available at Shucks Autozone Carquest
  • I have tried the Dayco belt, and it does work. However, after a few hundred miles, the belt wore out. I suspect that the belt angle (the angle of the "V") is slightly different. The point --> don't expect a long life with this alternate belt.


Cheapest BX40 belts I've found..... http://www.vbeltsupply.com/ecommerce/bx40.html Just got the order today so can't comment on reliability. Also, huge shipping discounts with multiple orders, so get some friends to buy some with you.

Exhaust Gasket

I don't buy Honda parts - I just go to ebay for these. I usually do a search for "50" and "exhaust gasket". As long as the gasket is copper and about 1-1/4" across, it will usually work. Here's a pic from ebay:

Exhaust gasket for PA50.jpg


Honda PA50 Information
Main ArticleManualsModel InfoModel Differences
Carb/FuelEngineDrivetrainWheels & TiresExhaustElectricalBody and FramePA50I/PA50M PerformanceTroubleshootingPartsTools