Dellorto SHA air filter mod
These step by step directions and pictures will show you how to make your restrictive stock Dellorto SHA air filter, high flow.
For this mod you will need the stock SHA air filter element and some high flow air filter material.
The stock SHA air filter element consist of a housing and several stacked mesh screens.
Step one: Using a small flat head screw driver pry out the screens from the back, one by one. The first screen that you pry out will have larger holes than the rest of the screens. This is the screen that you will use for this mod. The screens are just pressure fitted inside the housing and can easily be pried out.
Step two: Cut a piece of metal mesh high flow filter or foam the same shape and diameter as the screens that you just removed from the air filter housing. I purchased a cheap metal mesh high flow filter from the local dirt bike shop for 7 bucks.
Now you have everything that you need: The screen with the large holes, the housing, and the piece of high flow filter.
Step three: Insert the cut piece of high flow filter into the housing from the back so that it is up front. Then pop the screen with the large holes in behind the filter to hold it in place.
Now you have got a high flow filter with a totally stock profile.