Difference between revisions of "Crankshaft ignition taper"

From Moped Wiki
Jump to: navigation, search
 
Line 3: Line 3:
 
=== Measuring the taper on your crankshaft ===
 
=== Measuring the taper on your crankshaft ===
  
This guide shows different methods to measure the taper of a shaft.  Thanks orangerobin for the reference.
+
This guide shows different methods to measure the taper of a shaft.   
  
[[Image:Usr_www_users_phreakco_decepticon_img_forums_ma_forum_performance_1294855941_tapers-1.pdf]]
+
Thanks orangerobin for the reference.
 +
 
 +
[[Image:Usr www users phreakco decepticon img forums ma forum performance 1294855941 tapers-1.jpg]]
 +
 
 +
According to Naz, "Most of the ones I’ve done all seem to be 5 degree, except the silly french of course, which is fairly shallow taper and I can’t remember either 3 or 4 degree’s."
 +
 
 +
=== Tapers of common components ===

Revision as of 14:43, 12 January 2011

Crankshaft Tapers

Measuring the taper on your crankshaft

This guide shows different methods to measure the taper of a shaft.

Thanks orangerobin for the reference.

Usr www users phreakco decepticon img forums ma forum performance 1294855941 tapers-1.jpg

According to Naz, "Most of the ones I’ve done all seem to be 5 degree, except the silly french of course, which is fairly shallow taper and I can’t remember either 3 or 4 degree’s."

Tapers of common components