| Line 360: | Line 360: | ||
===Seal=== | ===Seal=== | ||
| + | {| border="1" cellspacing="0" cellpadding="5" | ||
| + | ! ID | ||
| + | ! Inner Diameter | ||
| + | ! Outer Diameter | ||
| + | ! Width | ||
| + | ! Usage | ||
| + | ! Quantity | ||
| + | ! Notes | ||
| + | |- | ||
| + | |SC 15x21x4 | ||
| + | |15 | ||
| + | |21 | ||
| + | |4 | ||
| + | |Crankshaft Seals | ||
| + | |2 | ||
| + | | | ||
| + | |- | ||
| + | |} | ||
| + | |||
[http://www.iso.org/ ISO]<br/> | [http://www.iso.org/ ISO]<br/> | ||
Revision as of 17:19, 13 November 2011
Sizes are given in millimeters.
Puch E50
Bearing
| ID | Inner Diameter | Outer Diameter | Width | Usage | Quantity | Notes |
|---|---|---|---|---|---|---|
| 6203 C3 | 17 | 40 | 12 | Left Crankshaft, Main Gear | 2 | C3 clearance |
| 6203 NR | 17 | 40 | 12 | Right crankshaft | 1 | External Snap ring |
Seal
| ID | Inner Diameter | Outer Diameter | Width | Usage | Quantity | Notes |
|---|---|---|---|---|---|---|
| Double lip | 17 | 40 | 7 | Crankshaft Seals | 2 | |
| Double lip | 22 | 40 | 7 | Output shaft seal | 1 |
Puch ZA50
Bearing
| ID | Inner Diameter | Outer Diameter | Width | Usage | Quantity | Notes |
|---|---|---|---|---|---|---|
| L17 (FAG) | 17 | 40 | 10 | Magneto side crank bearing | ||
| E20 (FAG) | 20 | 47 | 12 | Transmission side crank bearing | ||
| 6002 (ISO) | 15 | 32 | 9 | Transmission cover crank side | ||
| 16101 (ISO) | 12 | 30 | 8 | Transmission cover intermediate side | ||
| 6005 (ISO) | 25 | 47 | 12 | Intermediate shaft main | ||
| 6203 (ISO) | 17 | 40 | 12 | Output shaft main | ||
| HK 1816 (FAG) | 18 | 24 | 16 | Output shaft roller | ||
| HK 1612 (FAG) | 16 | 22 | 12 | Second speed gear internals |
Seal
Sachs 50x
Bearing
| ID | Inner Diameter | Outer Diameter | Width | Usage | Quantity | Notes |
|---|---|---|---|---|---|---|
| 6202 | 15 | 35 | 11 | Left Crankshaft, Main Gear | 1 | |
| 6202 | 15 | 35 | 11 | Right crankshaft | 1 |
Seal
| ID | Inner Diameter | Outer Diameter | Width | Usage | Quantity | Notes |
|---|---|---|---|---|---|---|
| 15 | 30 | 5,5 | Clutch side crank seal | 1 | ||
| 15 | 35 | 7 | Magneto side crank seal | 1 | ||
| 15 | 32 | 5,5 | Output shaft seal | 1 |
Tomos A3
Bearing
| ID | Inner Diameter | Outer Diameter | Width | Usage | Quantity | Notes |
|---|
Seal
| ID | Inner Diameter | Outer Diameter | Width | Usage | Quantity | Notes |
|---|---|---|---|---|---|---|
| Lipped seal | 17 | 35 | 8 | Crankshaft seals | 2 | |
| Lipped Seal (metal lined?) | 16 | 24 | 7 | Right cover pedal shaft | 1 |
Tomos A35/A55
Bearing
| ID | Inner Diameter | Outer Diameter | Width | Usage | Quantity | Notes |
|---|---|---|---|---|---|---|
| 6203 C3 | 17 | 40 | 12 | Crank main bearings | 2 | C3 clearance |
| Needle Roller | 12 | 15 | 15 | Small end connecting rod | 1 | |
| One way needle bearing | Clutch Bell | 1 | ||||
| 608 | 8 | 22 | 7 | Trans Cover Crank support | 1 | |
| 6000 | 10 | 26 | 8 | Trans cover Counter shaft support | 1 | |
| 6201 | 12 | 32 | 10 | Left Counter shaft support | 1 | |
| Roller | d5 | 8 | Counter shaft gear | 1 | ||
| SCE 109P | Driveshaft bearing | 1 | Needle roller | |||
| SCE 108 | Driveshaft bearing | 1 | Needle roller | |||
| 6006 | 30 | 55 | 13 | Driveshaft bearing | 1 |
Seal
| ID | Inner Diameter | Outer Diameter | Width | Usage | Quantity | Notes |
|---|---|---|---|---|---|---|
| Lipped seal | 17 | 35 | 7 | Crankshaft seals | 2 | |
| Lipped seal | 35 | 47 | 7 | Output shaft seal | 1 | |
| Lipped seal | Transmission cover pedal shaft seal | 1 |
Motobecane AV7/AV10
Bearing
| ID | Inner Diameter | Outer Diameter | Width | Usage | Quantity | Notes |
|---|---|---|---|---|---|---|
| 533526 TNH | 16 | 42 | 13 | Crankshaft bearings | 2 | Special tapered ID |
Seal
| ID | Inner Diameter | Outer Diameter | Width | Usage | Quantity | Notes |
|---|---|---|---|---|---|---|
| SC 15x21x4 | 15 | 21 | 4 | Crankshaft Seals | 2 |
