This is a wiki page to contain parts that can be 3D printed for mopeds.
Parts
- Puch Maxi Speedometer Bracket Eliminator
- Magura Right Hand Switch Base
- Dellorto SHA ClipOn Cover
- Variator slides for derbi or honda
- Puch Air Box Hole Cover
- Puch Moped Bing Carburetor Loudening Funnel
- Puch Moped Emergency Oil Bottle Holder
- Peugeot TSM Seatpan Sidecovers
- PHBG 21MM Velocity Stack
- Tomos A35 Intake (alum cast)
- Suzuki FA50 Intake (alum cast)
- Motobecane Gas Cap
- Another Motobecane Gas Cap
- Motobecane/Pug Circlip Protector
- Motobecane/Solex Pedal Module
- Honda Hobbit Pedal Shaft Bushing
- Honda Hobbit Stock Ramp Plate Guides
- Moped Fairing
- Honda Hobbit Floor Panel (requires plastic welding)
- Honda Hobbit Floor Panel Set (requires large build surface area)
- Honda Hobbit Toolbox
- Fender wire clips
Tools
Gasket Tracers
- Vespa Gasket Tracers
- Honda Hobbit Moped Gasket Tracer
- Benelli G2/Moto Guzzi Robin Gasket Tracers
- Puch Polini Tracer
- Puch 70 TCCD Tracer
Misc.
- Helmet wall hook
- Puch keychain
- Peugeot 104 Model
- Mobylette Logo
- Spark Plug Cap
- Spark Plug Box
- TrailTech 7/8 holder mount
- Trail Tech V2 Gauge Holder for Moped Bullet Headlight
- UPJET Stencil
Here is a laser cut mod for Anet A8 printer. I made it so I could laser cut gaskets.
