Difference between revisions of "3D Printed Parts"

m (Added full hobbit floor panel set from thingiverse)
 
(33 intermediate revisions by 16 users not shown)
Line 1: Line 1:
This is a wiki page to contain parts that can be 3D printed for mopeds.
+
Below are links source files (mostly at [https://www.thingiverse.com/ thingiverse.com] ) for moped parts that can be 3D printed.
  
===Parts===
+
==Parts==
*[https://www.thingiverse.com/thing:4010074 Puch Maxi Speedometer Bracket Eliminator]
+
=== Puch ===
*[https://www.thingiverse.com/thing:4012517 Magura Right Hand Switch Base]
+
*[https://www.endtas.com/puch-magnum-monza-3d-printable-decal-set/#more-2270 Puch Magnum-Monza 3d printable decal set and badges]
*[https://www.thingiverse.com/thing:2561606 Dellorto SHA ClipOn Cover]
+
*[https://www.endtas.com/puch-handlebar-switch/#more-2135 Puch Magnum-Monza handlebar switches]
*[https://www.thingiverse.com/thing:135248 Variator slides for derbi or honda]
+
*[https://www.thingiverse.com/thing:4972381 Puch Magnum trunk door bolt]
 +
*[https://www.endtas.com/moped-motorbike-headlight/#more-1978 Puch maxi headlight]
 +
*[https://www.endtas.com/puch-magnum-seat-toolbox-lid/#more-1535 Puch Maxi-Monza under-seat toolbox lid]  
 
*[https://www.thingiverse.com/thing:1332475 Puch Air Box Hole Cover]
 
*[https://www.thingiverse.com/thing:1332475 Puch Air Box Hole Cover]
 
*[https://www.thingiverse.com/thing:1093264 Puch Moped Bing Carburetor Loudening Funnel]
 
*[https://www.thingiverse.com/thing:1093264 Puch Moped Bing Carburetor Loudening Funnel]
 
*[https://www.thingiverse.com/thing:1093290 Puch Moped Emergency Oil Bottle Holder]
 
*[https://www.thingiverse.com/thing:1093290 Puch Moped Emergency Oil Bottle Holder]
*[https://www.thingiverse.com/thing:2779632 Peugeot TSM Seatpan Sidecovers]
+
*[https://www.thingiverse.com/thing:4010074 Puch Maxi Speedometer Bracket Eliminator]
*[https://www.thingiverse.com/thing:629678 PHBG 21MM Velocity Stack]
+
*[https://www.thingiverse.com/thing:4359841 Puch Magnum Underdash Plastic]
 +
*[https://www.thingiverse.com/thing:3640923 Puch Maxi sidecover screw]
 +
 
 +
=== Tomos ===
 +
*[https://www.thingiverse.com/thing:5355087 Tomos 85mm speedometer dash]
 
*[https://www.thingiverse.com/thing:499953 Tomos A35 Intake (alum cast)]
 
*[https://www.thingiverse.com/thing:499953 Tomos A35 Intake (alum cast)]
*[https://www.thingiverse.com/thing:1827626 Suzuki FA50 Intake (alum cast)]
+
 
 +
=== Honda / Derbi ===
 +
*[https://www.thingiverse.com/thing:5211093 Honda Express Headlight Bucket]
 +
*[https://www.thingiverse.com/thing:5211091 Honda Express Carb Cover / Airbox]
 +
*[https://www.thingiverse.com/thing:5211090 Honda Gyro Wheel Hub Cover]
 +
*[https://www.thingiverse.com/thing:3083197 Honda Hobbit Pedal Shaft Bushing]
 +
*[https://www.thingiverse.com/thing:3088288 Honda Hobbit Stock Ramp Plate Guides]
 +
*[https://www.thingiverse.com/thing:3208375 Honda Hobbit Floor Panel (requires plastic welding)]
 +
*[https://www.thingiverse.com/thing:3351458 Honda Hobbit Floor Panel Set (requires large build surface area)]
 +
*[https://www.thingiverse.com/thing:3482159 Honda Hobbit Toolbox]
 +
*[https://www.thingiverse.com/thing:4128691 Honda PA50 Hobbit Camino headlight bezel ring]
 +
*[https://www.thingiverse.com/thing:135248 Variator slides for derbi or honda]
 +
*[https://www.thingiverse.com/thing:4612494 Derbi Ignition Cover for Piston Port / Pyramid Reed]
 +
 
 +
=== Motobecane / Peugeot ===
 
*[https://www.thingiverse.com/thing:2960798 Motobecane Gas Cap]
 
*[https://www.thingiverse.com/thing:2960798 Motobecane Gas Cap]
 
*[https://www.thingiverse.com/thing:2684638 Another Motobecane Gas Cap]
 
*[https://www.thingiverse.com/thing:2684638 Another Motobecane Gas Cap]
 
*[https://www.thingiverse.com/thing:2144947 Motobecane/Pug Circlip Protector]
 
*[https://www.thingiverse.com/thing:2144947 Motobecane/Pug Circlip Protector]
 
*[https://www.thingiverse.com/thing:2124950 Motobecane/Solex Pedal Module]
 
*[https://www.thingiverse.com/thing:2124950 Motobecane/Solex Pedal Module]
*[https://www.thingiverse.com/thing:3083197 Honda Hobbit Pedal Shaft Bushing]
+
*[https://www.thingiverse.com/thing:2779632 Peugeot TSM Seatpan Sidecovers]
*[https://www.thingiverse.com/thing:3088288 Honda Hobbit Stock Ramp Plate Guides]
+
=== Vespa ===
 +
*[https://www.thingiverse.com/thing:4780705 Vespa Bravo Toolbox]
 +
*[https://www.thingiverse.com/thing:4803595 Vespa Bravo Toolbox Taillight]
 +
*[https://www.thingiverse.com/thing:5270146 Vespa Ciao Headlight Grille]
 +
*[https://www.thingiverse.com/thing:4803018 Vespa Ciao Document Holder]
 +
=== Other ===
 +
*[https://www.thingiverse.com/thing:1827626 Suzuki FA50 Intake (alum cast)]
 +
*[https://www.thingiverse.com/thing:4492361 Sachs 505 Partial Flywheel cover]
 +
=== Misc Parts ===
 +
*[https://www.endtas.com/headlight-frame-designs/#more-1614 Moped headlight cages]
 +
*[https://www.endtas.com/bike-handlebar-switch-designs/#more-1548 Moped handlebar switch holder designs]
 +
*[https://www.thingiverse.com/thing:4012517 Magura Right Hand Switch Base]
 +
*[https://www.thingiverse.com/thing:2561606 Dellorto SHA ClipOn Cover]
 +
*[https://www.thingiverse.com/thing:629678 PHBG 21MM Velocity Stack]
 
*[https://www.thingiverse.com/thing:3083598 Moped Fairing]
 
*[https://www.thingiverse.com/thing:3083598 Moped Fairing]
*[https://www.thingiverse.com/thing:3208375 Honda Hobbit Floor Panel (requires plastic welding)]
 
*
 
[https://www.thingiverse.com/thing:3351458 Honda Hobbit Floor Panel Set (requires large build surface area)]
 
*
 
[https://www.thingiverse.com/thing:3482159 Honda Hobbit Toolbox]
 
 
*[https://www.thingiverse.com/thing:3740847 Fender wire clips]
 
*[https://www.thingiverse.com/thing:3740847 Fender wire clips]
 +
*[https://www.thingiverse.com/thing:629678 PHBG Velocity Stack]
 +
*[https://www.thingiverse.com/thing:4324174 PHBG Adapter for SHA filters]
 +
*[https://www.thingiverse.com/thing:5224184 Bing Carb Choke Handle]
  
===Tools===
+
==Tools==
 
*[https://www.thingiverse.com/thing:2212068 Chain Lube Guard]
 
*[https://www.thingiverse.com/thing:2212068 Chain Lube Guard]
 
*[https://www.thingiverse.com/thing:2945373 Timing Degree Wheel]
 
*[https://www.thingiverse.com/thing:2945373 Timing Degree Wheel]
 +
*[https://www.thingiverse.com/thing:4948169 Dial Indicator Adapter - Timing Tool]
 +
*[https://www.thingiverse.com/thing:4969186 Puch Clutch Post Drill Guide]
  
===Gasket Tracers===
+
==Gasket Tracers==
 +
*[[Suzuki fa50 base gasket|Suzuki FA50 Base Gasket Tracer]]
 
*[https://www.thingiverse.com/thing:2779581 Vespa Gasket Tracers]
 
*[https://www.thingiverse.com/thing:2779581 Vespa Gasket Tracers]
 
*[https://www.thingiverse.com/thing:2845588 Honda Hobbit Moped Gasket Tracer]
 
*[https://www.thingiverse.com/thing:2845588 Honda Hobbit Moped Gasket Tracer]
 +
*[https://www.thingiverse.com/thing:4303683 Honda Hobbit Case Gasket Tracer V2]
 +
*[https://www.thingiverse.com/thing:4303677 Honda Hobbit Metrakit Gasket Tracer]
 
*[https://www.thingiverse.com/thing:3392773 Benelli G2/Moto Guzzi Robin Gasket Tracers]
 
*[https://www.thingiverse.com/thing:3392773 Benelli G2/Moto Guzzi Robin Gasket Tracers]
 
*[https://www.thingiverse.com/thing:3392757 Puch Polini Tracer]
 
*[https://www.thingiverse.com/thing:3392757 Puch Polini Tracer]
 +
*[[Euro Kit Puch Gasket Tracer 47mm|Puch Euro Kit 47mm Tracer]]
 
*[https://www.thingiverse.com/thing:3392762 Puch 70 TCCD Tracer]
 
*[https://www.thingiverse.com/thing:3392762 Puch 70 TCCD Tracer]
 +
*[https://www.thingiverse.com/thing:4297259 Motobecane Base Tracer]
 +
*[https://www.thingiverse.com/thing:4299317 Motobecane Case Tracer]
 +
*[https://www.thingiverse.com/thing:3135087 PHBG Bowl Gasket Tracer]
 +
*[https://www.thingiverse.com/thing:3135091 PHBG Top Gasket Tracer]
  
===Misc.===
+
==Misc.==
 
*[https://www.thingiverse.com/thing:442460 Helmet wall hook]
 
*[https://www.thingiverse.com/thing:442460 Helmet wall hook]
 
*[https://www.thingiverse.com/thing:2642888 Puch keychain]
 
*[https://www.thingiverse.com/thing:2642888 Puch keychain]
Line 47: Line 88:
 
*[https://www.thingiverse.com/thing:3624668 TrailTech 7/8 holder mount]
 
*[https://www.thingiverse.com/thing:3624668 TrailTech 7/8 holder mount]
 
*[https://pinshape.com/items/56226-3d-printed-trail-tech-v2-gauge-holder-for-moped-bullet-headlight Trail Tech V2 Gauge Holder for Moped Bullet Headlight]
 
*[https://pinshape.com/items/56226-3d-printed-trail-tech-v2-gauge-holder-for-moped-bullet-headlight Trail Tech V2 Gauge Holder for Moped Bullet Headlight]
*[https://www.thingiverse.com/thing:4012511 UPJET Stencil]
+
*[https://www.thingiverse.com/thing:4299303 Bullet Headlight Trail Tech v3 Gauge Holder for Moped Bullet Headlight]
 +
*[https://www.thingiverse.com/thing:4649397 gilardoni intake base plate]
  
 
Here is a l[https://www.thingiverse.com/thing:2564978 aser cut mod for Anet A8 printer]. I made it so I could laser cut gaskets.
 
Here is a l[https://www.thingiverse.com/thing:2564978 aser cut mod for Anet A8 printer]. I made it so I could laser cut gaskets.
  
 
[[Category:Moped parts]]
 
[[Category:Moped parts]]

Latest revision as of 10:26, 15 May 2022

Below are links source files (mostly at thingiverse.com ) for moped parts that can be 3D printed.

Parts

Puch

Tomos

Honda / Derbi

Motobecane / Peugeot

Vespa

Other

Misc Parts

Tools

Gasket Tracers

Misc.

Here is a laser cut mod for Anet A8 printer. I made it so I could laser cut gaskets.