Results 91–120 of 871
91. why does one garrely go faster than others?
Forum: Performance
i was looking at the moped manual and i saw that they listed different jet sizes for different mph moped models. but the carb is the same . so does the jet size dictate the speed or is there other factors?take a look on the bottom of page 82"http://www.mopedriders.org/html/manuals/garelli/csm/garellicsm.htm":url
92. increase speed on garelli eureka flex?
Forum: Performance
hi,i just purchased a 1978 eureka flex ( it also says grand sport?) and it is stock . i would like to know what options i would have to increase the speed on this ped?thank you
96. Worn tube ?
Forum: Repair
Hi,I had a flat in my rear tire, I opened it up to patch it and i noticed what almost seemed like it was sanded/worn around the diameter of the tube. What could cause this? I patched it up and reinstalled and it is holding air fine. is it safe to ride on a worn tube?thank you.
97. qt50 brake shoes
Forum: Repair
Each drum has 2 shoes. are the 2 shoes the same is there any difference between them?As i recall that i purchased 2 sets and i had to interchange one shoe from one set to the other to get a matching pair was this wrong? and would this affect my braking ?thank you
99. qt50 petcock rubber washer
Forum: Repair
Hi,the qt50 petcock rubber gasket is in bad shape and i believe that is the reason the gas is leaking. where would i get a replacement?thank you
100. qt50 stock carb or 15;15 delorto
Forum: Repair
what do you guys think think they are selling stock carbs on ebay or sHould try to put a 15:15 delorto?
103. wheel not spinning freely
Forum: Repair
Hi,I re-greased the bearings with a Teflon grease. I had a bike shop but the cones back on with lock nut. He said there was a bit of a ruff spot in the spin, so the best he could do was find "a happy medium" when he replaced the axle with the cone and lock nuts. now am putting the wheel back on my moped and i noticed that when i tighten the bolts to the fork the tighter it is the less
106. Motobecane wheels
Forum: Repair
Hi,I was replacing a tube in the front tire and i noticed that the wheel didnt feel like it was spinning so freely is this normal.thank you
107. Re: 78 ureka flex muffler internal asembly missing
Forum: Repair
i cant seem to get that link to light up so please cut and paste belowhttp://www.mopedriders.org/html/manuals/garelli/csm/garellicsm.htm
108. Re: 78 ureka flex muffler internal asembly missing
Forum: Repair
sorrySee link below the internal assembly is in pic # 27
109. Re: 78 ureka flex muffler internal asembly missing
Forum: Repair
See link below the internal assembly is in pic # 27"http://www.mopedriders.org/html/manuals/garelli/csm/garellicsm.htm";url
110. 78 ureka flex muffler internal asembly missing?
Forum: Repair
I noticed today that the interior assembly of my muffler is missing first how can this have happened ? second what can this do damage wise to my motor?
111. scab self sticking patches?
Forum: Repair
Hi,anyone have an opinion on these self sticking patches?thank you
112. moby 50vlx horn
Forum: Repair
Hi,The other day I skidded on some gravel on a turn scrapped my knee and dropped my ped. Now the horn does not work, although everything else seems to work fine and the wires seem to be ok. any ideas?thank you
113. Re: 1981 jawa lock washer tab shear
Forum: Repair
its # 12 it looks flat in the diagram but it has a tab.
114. Re: 1981 jawa lock washer tab shear
Forum: Repair
yea, to me it almost superfluous to have that lock washer since those 3 screws hold down the plate anyway unless there is something im missing?
116. Re: JAWA 210 air filter
Forum: Repair
i am also missing my air filter like you are, it would be nice if someone had an idea how to replace it.
117. 1981 jawa lock washer tab shear
Forum: Repair
hi,by the clutch cover i removed the nut w/o bending down the lock washer? i think i may have sheared the little tab on the lock washer does this sound right?thanks
118. Re: video: seal ring coming out & fuel to carb
Forum: Repair
i wanted to take of that plate with the 3 screws and the large flat bolt in the center how is that done ?