Results 31–60 of 99
Mitch Mills — 1 year ago
That setup is just begging for a airsal 65 kit, with a regear...
Mitch Mills — 1 year ago
If you post your current setup you'll get much better answers. What exhaust, carb size, current jet?
Mitch Mills — 1 year ago
Are you going to thermosiphon this or drive off a pump?
Mitch Mills — 1 year ago
Swappa.comI buy all my phones used/refurbished from this place.
Mitch Mills — 1 year ago
> Phil Liechty wrote:> ------------------------------------------------------->> Please guys, don't even try.This sounds like a dare.
Mitch Mills — 1 year ago
I think I have one of the early ones since I bought it before they were for sale on the website. I've had quite a bit of trouble with it. Multiple rounds of loctite of blue and red variety and it's always tossed a bolt after a very low number of miles.That being said, I think this would be a great performance replacement with a little alteration. I think the open, full thread bolt is the
Mitch Mills — 1 year ago
👀👀
Mitch Mills — 1 year ago
Go to a different DMV. Take a filled out application for title (form PS-2000), filled out statement of facts (form PS-2002), and bring in a printed photo of each side of the bike and also the VIN plate.I've titled numerous bikes without a history like this and it's been no problem. However, once you go somewhere that decides you have to do a bonded title it's over. Just go somewhere
Mitch Mills — 1 year ago
Once that thing is running head on up to Minneapolis for a Thursday ride!
Mitch Mills — 1 year ago
Best deal personally was a running, driving, titled Gadabout for $175 bucks. I was very stoked on that deal.
Mitch Mills — 1 year ago
Man do I need that odyssey. Why is PA so far from me.
Mitch Mills — 1 year ago
Gonna bump this.
Mitch Mills — 1 year ago
SEND IT BACK TO MN
Mitch Mills — 1 year ago
Also sent a pm
Mitch Mills — 1 year ago
Yesssss. So happy to see this finally paired with a variator.
Mitch Mills — 1 year ago
Perfect whats going on with the solo then I'll send you one of mine for a copy job. 2021 is the year of the solo
Mitch Mills — 1 year ago
I almost guarantee there is someone local to Michigan too. Just look for a snowmobile tuning shop. That's what bill bune is.
Mitch Mills — 1 year ago
What was the final choice for your gasket material? I've been looking at what I'm going to replace mine with and I'm looking at some high chemical resistance, high temp rubber to cut to shape.
Mitch Mills — 1 year ago
I'd also say like a bike tire tube slipped over the spring would help too. Not sure how well it would stay but it's an idea I've seen on smaller springs.
Mitch Mills — 2 years ago
I have one on a v1 polini and all I needed to do was notch the intake to meet the vacuum circuit and it works well. If you run the carb "upside down" with the diaphragm on top you can also use gravity to your advantage. It takes a little playing around with pop off spring to get the mid range dialed in, but yeah it's basically an on off switch. Super fun though.Also a tillotson hl-1
Mitch Mills — 2 years ago
Aw man. If this doesn't sell I would be very interested come spring.
Mitch Mills — 2 years ago
How's the centering on the wheel hub? I know I needed to take a sprocket to a machine shop to have the mounting holes indexed to center when I opened up the hub. If it's mounted even slightly off center the run out will multiply on the outside diameter. Doesn't help that it's dished too.
Mitch Mills — 2 years ago
> Daniel '' Wrote:> -------------------------------------------------------> It’s not worth how nasty it is in there, the performance difference for> my set up was not noticeable after removing the internal header. Just> cut the lower flange off and weld a Vespa or pug/moby pipe on there. On> mine I was thinking if it sucked I would go back to stock so I bolted a> b
Mitch Mills — 2 years ago
Open up that stock exhaust and take a look at the hidden internal header extension. Might be able to squeeze a little more out of it by playing with the length?
Mitch Mills — 2 years ago
Sounds right to me. Dumb dumb math I always use is the equivalence method:57/17 = x/1653.something, so 54 would match.
Mitch Mills — 2 years ago
> Aaron Blair Wrote:> -------------------------------------------------------> Why did I think solos we single speeds? Or the wierd 2speed planetary> pulley.>> Had no idea that some were variated. Or were the moving cheeks the> clutch function?Ha sent this as a PM first cause I suck.There are three versions, single speed, variated, and fixed front w/ two speed pulley (only on
Mitch Mills — 2 years ago
Let me check mine and see if it ratty or not
Mitch Mills — 2 years ago
Is that exhaust bracket attached to the swing arm? Did that cause any issues while riding?
Mitch Mills — 2 years ago
I didn't take it further apart than this but there is a plastic planetary gear set behind the cover and a two arm clutch behind the chain side half. It looks like a huge set of starter shoes. Very interested to see what kind of engagement this has and what it even does.Myron's has a basic diagram of it.2-speed diagram
Mitch Mills — 2 years ago
I've been buying up all the solo crap that comes up for sale in MN so I have spares and parts to test things on. I have a wrecked cylinder that would be perfect to cut into to see exactly how far you can go before breaking into the water jacket if you want it.The plan with mine is to adapt the two speed pulley onto it to have something extra interesting.