Results 31–60 of 172
Brent Bhuiyan — 9 months ago
a rally "how to" video would be nice for the childrens.
Brent Bhuiyan — 9 months ago
> baird co Wrote:> -------------------------------------------------------> I finally got accepted into the cool guy weird bonus from treats club.>> 2 big four-way metric wrenches, which I will totally use every day.your never gonna lose that 10mm again.
Brent Bhuiyan — 9 months ago
PM'd
Brent Bhuiyan — 9 months ago
I kinda like this idea... paired with a blood hound you could be the ultimate moped recovery crime fighter
Brent Bhuiyan — 9 months ago
Excellence. GORGEOUS.
Brent Bhuiyan — 10 months ago
.
Brent Bhuiyan — 10 months ago
Hey Y'all I'm looking for a tomos upper yoke like this or similar. it doesn't need to be functional or in good shape I just need to cut the head tube section out of one to make a fork adapter for a colibri. figured I'd see if anyone had a junk one laying around before I went a bought a new one to cut up.THANKS
Brent Bhuiyan — 10 months ago
Grant Taylor RIPS
Brent Bhuiyan — 10 months ago
I use skateboards and skateboard accessories
Brent Bhuiyan — 10 months ago
I found one of these mini city baretta's last year.https://mopedarmy.com/forums/read.php?1,4333838,4333865,flat=1#msg-4333865it's pretty beat but I'm going to try to restore it as much as possible, the wheels were too crusty to save and the tank was rusted out with half of one side gone. The motor was in save-able condition but I think I'm gonna put a v1 on it soon. I got some
Brent Bhuiyan — 10 months ago
Djogo Toro by Volta JazzBobo Yeye Music. West African 60's-70's rock n rollhttps://www.npr.org/2016/11/17/502441155/in-this-bobo-y-y-box-set-find-the-creativity-and-optimism-of-a-lost-world
Brent Bhuiyan — 10 months ago
The clutch really is the trickiest part of the equation. I think I ended up with an A3 first gear with blue springs and 2nd had yellow springs. I haven't been in there in awhile but I'm probably getting a jammer clutch soon just to try out.
Brent Bhuiyan — 10 months ago
with a little porting of the stock kit, a treats big pipe, stock gearing, and a clone 19 PHBG and matching intake I'm hitting 47-49, and that's pulling my 240 lb butt after a late night taco run. takes a bit to get up into the power band, but really not that bad, shoots off at about 15-20 mph
Brent Bhuiyan — 10 months ago
Gonna throw my guy Ray Santoes hobbit into the mix. He's been poppin off with some boso tough man revs. super danger, big hands, rubber ducky
Brent Bhuiyan — 10 months ago
> Tong P. Wrote:> -------------------------------------------------------> fairing from Z-fatherpink/purple bug stopper is F I R E.
Brent Bhuiyan — 11 months ago
timed with a timing light. there was issues with that though I think the timing light might have been off... it was alternating from showing TDC and BDC but the timing at TDC was right. I'm at the point of prolly switching this thing back to points because the CDI has been such a headache. I'm gonna try swapping the coil with a known to be good one. It has one of the hi rpm box /12v com
Brent Bhuiyan — 11 months ago
Hi all, I just rebuilt an e50 with a polini kit, 19mm, CDI set to 16 degrees BTDC, Proma circuit setup. the bike was running before I tore it down but it had a cylinder stud issue that forced me to replace the bottom half of the case so while I had it apart I put in new seals and bearings and case matched to the kit a little better than what the PO had done. I cut the top cylinder skirt off the p
Brent Bhuiyan — 11 months ago
> daan SJAARLOOS Wrote:> -------------------------------------------------------> ^^^^all added. Thanks for the input.! Almost 19 hours now.>> https://open.spotify.com/playlist/4E5HTqXsOPzYFu0Jn3lxv4?si=pOKvyjRLS_uAzBweMrxqjg&utm_source=copy-linkThis is a pretty heavy playlist honestly. Great job!
Brent Bhuiyan — 11 months ago
New Mexico is awesome my mother lives just north of the Colorado/New Mexico border in the San Luis Valley, it's some of the best star gazing country because there are no "major" cities near except Alamogordo (which is UFO central if you didn't know). I try to go a different route through NM every time when I drive up from Texas to visit. Ruidoso is a beautiful area. Also there
Brent Bhuiyan — 11 months ago
Khruangbin, king glizzer and the jizzer wizzer (AKA King Gizzard and the Lizard Wizard), Roky Erikson, King Khan and The Shrines/BBQ, Ramones, Lee Hazlewood, The James Hunter Six, Mother Fuckin Motorhead!, Jerry Jeff Walker, Terry Allen, Tubeway Army, Gucci Mane, Thundercat, Sturgill Simpson, Devendra Banhart, Haruomi Hosono, Black Joe Luis and the Honeybears, real rock'n'roll like Litt
Brent Bhuiyan — 12 months ago
> baird co Wrote:> -------------------------------------------------------> Pedal wrench mod, minarelli clutch puller, two spoke wrenches, and a> worn out nipple driver.does all of that nest into the pedal wrench? That would be awesome. I bet you might even fit a double sided screwdriver bit and one of those micro right angle ratcheting screwdrivers in and have a good little road pack
Brent Bhuiyan — 1 year ago
> P D Wrote:> -------------------------------------------------------> > Brent Bhuiyan Wrote:>> > ------------------------------------------------------->> > Add a really cool hand drill to the list. Also, a used tail light>> > housing and a box of my favorite Amy's bowl!>> FYI , that hand drill is called a bit brace . ;)Didn't know that thank
Brent Bhuiyan — 1 year ago
They cradle my butt so well tho LOL. I get where you guys are coming from, I thought about that, but made a CHOICE. I figure I should see it through at least to completion before scrapping the idea and going for the typical straight long style.
Brent Bhuiyan — 1 year ago
Add a really cool hand drill to the list. Also, a used tail light housing and a box of my favorite Amy's bowl!
Brent Bhuiyan — 1 year ago
somewhat. I assume the point is to be outlandish and over the top in a bland society, however I've never been in a bosozuku gang so I won't speak on the spirit of boso BUT aesthetically speaking I just don't like the color and would ride it less if it looked more Bozo The Clown
Brent Bhuiyan — 1 year ago
Lmao. I know it's big dumb. Hopefully it won't look AS clownish after some paint. But maybe it'll be even more ridiculous who knows... I can always throw a stock seat back on anytime
Brent Bhuiyan — 1 year ago
> Derek Stahl Wrote:> -------------------------------------------------------> http://garage.1977mopeds.com/assets/images/builds/2967/ee3f6cc2160f7d045a6147d78fa8bdd2.jpg>> Just gotta stick a big fairing and tall pipe on this thing.Siqqq. What rear rack is that on the front?
Brent Bhuiyan — 1 year ago
Okay so I used a sewing machine for the first time ever and reconstructed the gamer chair leather. About to go get some different glues to tighten everything up but wanted to check the fit so I mocked it up right quick and snapped a pic. Once I get it all cinched I'm prolly gonna paint that awful red either white or black.
Brent Bhuiyan — 1 year ago
bump for good a seller!
Brent Bhuiyan — 1 year ago
ok now I'm back into this thread for the downhill butts