Results 61–90 of 798
Luna Moto — 6 months ago
You can use a hobbit bell also
Luna Moto — 6 months ago
I mean you can’t really add links you’ll just need a new chain . I guess you can run 2 master links and put in a small piece of chain but that’s sketchy to me
Luna Moto — 6 months ago
I have the lower side covers and new cnc side cover bolts from treats . It is missing the upper right side cover tho . Will trade for a a55 tomos sprint plus cash or make me a cash offer
Luna Moto — 6 months ago
Anyone looking for a cobra ?
Luna Moto — 6 months ago
The long haired Doxie 😍I have one too
Luna Moto — 7 months ago
Get a thick piece of glass or piece of granite or something that’s known flat and put on of those sticky sand paper disks on it and deck the intake flat
Luna Moto — 7 months ago
https://www.mopedarmy.com/wiki/Cleaning_the_muffler
Luna Moto — 7 months ago
Well you got something not right. A stock hobbit should do 30 mph no problem. It’s very common for the exhaust to get clogged with carbon on hobbits . I’d also throw in a new set of crank seals for good measure.
Luna Moto — 7 months ago
I chopped mine off for ego boosts tooDefinitely don’t look as good as those ^ lol mine was the night before the rally kinda job but they held up great !
Luna Moto — 7 months ago
Looks like yz85 I have the same front end kicking around waiting to go on something haha
Luna Moto — 7 months ago
I’ll make a port map of it tomorrow but it looks pretty decent I can’t complain and I have a 4 petal laying around I can throw on also
Luna Moto — 7 months ago
Puch or tomos it doesn’t matterI know what they are capable of out the box I’m just wondering what people are doing to them porting wise I’ve heard guys porting them like a gila cylinder or a polini cylinderI picked up one of these 44mm kits from dos https://www.doscycles.com/products/tomos-44mm-65cc-dos-reed-kitSo I’d like to mess with one on the porting end and see what I can do with it they’re
Luna Moto — 7 months ago
Well obviously the treats reed kit/44,45mm is very popular cheap and can make good power. I know there’s threads on this I did some searching and found stuff here and there but not one spot with the answers so I’d like this to be just that ! I want to know what you guys are doing to these kits .Case matched Y/NCarbIntakePorting info - port maps always appreciatedExhaust
Luna Moto — 7 months ago
Kinetic ?
Luna Moto — 8 months ago
Why it keeps turning my pics sideways the world may never know
Luna Moto — 8 months ago
Well I’m back on my Vespa bullshit lolMy ciao has been down for quite some time now it has a euro cdi motor with a dr kit and a fire pipe. A while back I went to start it and I guess the carb had leaked a bunch of fuel into the engine and I tried to start it and sheared the woodruff key and destroyed the flywheel lol . So it sat till I finally got a new flywheel and I installed that and it ran fin
Luna Moto — 8 months ago
I love wearing ear plugs while I ride ! And I’m younger than most of you old farts lolI mostly wear them because of wind noise tho that’s what really bugs me while I ride . Hearing loud mopeds is whatever but I think more people should give them a try you can actually hear your moped better while you ride better so when that death trap between your legs decides to eat it’s own c clip and lock TF u
Luna Moto — 8 months ago
Bump
Luna Moto — 8 months ago
Put it on bring a trailer get Bookoo bucks !
Luna Moto — 8 months ago
No they are pretty easy just find someone that has done a 16 sha on a stock cylinder with a pipe and they can tell you what jet they are running (I’m sure someone will chime in ) and they just buy that jet range on treats and pop in the one they said first and go from there. There’s no tuning screws on a sha besides idle adjustment so you don’t have much to mess with
Luna Moto — 8 months ago
https://www.treatland.tv/will-s-budget-friendly-tomos-A35-speed-party-p/a35-stock-party.htmThat and 22t sprocket and some clutch springs and your chillin I think I went blue on first gear and yellow on second but don’t quote me on that
Luna Moto — 8 months ago
BBBump
Luna Moto — 8 months ago
Air Motorcycle Seat Cushion Pressure Relief Ride Seat Pad Large for Cruiser Touring Saddles, Shock Absorption, Water Inflatable (Black)https://www.amazon.com/dp/B07XT9PR1Q/
amzn_assoc_tracking_id = "mopedarmy-20";
amzn_assoc_ad_mode = "manual";
amzn_assoc_ad_type = "smart";
amzn_assoc_marketplace = "amazon";
amzn_assoc_region = "US";
amzn_assoc_design = "enhanced_links";
amzn_assoc_asins =
Luna Moto — 8 months ago
I’m looking for one of these let me know what you have
Luna Moto — 8 months ago
Damn my back hurts just looking at that thing
Luna Moto — 8 months ago
Messaged
Luna Moto — 9 months ago
I love this I have a couple phva 14’s laying around I wanted to put on a a35 and I think this is the answer !
Luna Moto — 12 months ago
Sold! Thanks
Luna Moto — 12 months ago
-
Luna Moto — 12 months ago
.