Results 151–180 of 5204
Slug Scouten — 7 weeks ago
> Bryan Shank wrote:> -------------------------------------------------------> How’s the sheep holding up? Need a patch kit yet? Hahait didnt even make it out of the box unscathed lol
Slug Scouten — 7 weeks ago
Man, what a weekend!It was great seeing everyoneIt was also great driving the Zeros BsB bus home with its sweet new "WE HAVE DRUGS" sticker, hand made by MarsIt was also the culmination of a secret plan! One of our members was scheduled to graduate from Airplane Mechanic School. He's been after a yellow Motron for years, Maize happened to be selling one, so we purchased it from him,
Slug Scouten — 7 weeks ago
Yuuuuussss please make these for Peugeots!I love me a Le Partie, but there is barely enough thread to keep them on resulting in slipped timing
Slug Scouten — 8 weeks ago
> Deadped Ryan wrote:> -------------------------------------------------------> damnit I was about to post this, whatever, Im doing it again, hope all is well!
Slug Scouten — 8 weeks ago
> 🎨🏆 Duncan wrote:> -------------------------------------------------------> > b to the eff wrote:>> > ------------------------------------------------------->> > > Pops Peds wrote:>> >>> > > ------------------------------------------------------->> >>> > > My thought on this is if the news media and people would ignore the
Slug Scouten — 8 weeks ago
> Mike Boyd wrote:> -------------------------------------------------------> I so badly want someone to make 3D printed plastic flywheel covers with> louvered vents on either side. I finally have access to a 3D printer at> my shop (not my own tho) so I might try to prototype, but would be rad> if someone who has their own and more experience could try it out. Could> even rivet
Slug Scouten — 8 weeks ago
> b to the eff wrote:> -------------------------------------------------------> If the coil was putting out too much power, the ignition cover sure> didn't help.>> The voltage delivered by the coil goes up proportionally with rpm. The> power goes up with rpm *squared*.>> Max current for a wire is defined not directly by wire gauge (there are> guidelines, but the
Slug Scouten — 2 months ago
> ID OD wrote:> -------------------------------------------------------> My biggest regret, not coughing up $500 for a full set of tools 15 yrs> ago. I can’t be of help to myself or anyone without them. Now I have> zero desire to wrench za50’s. It’s just easier to do e50 swaps and be> done with it. It’s nice to see someone willing to take them on. I’ve got> quite the za50 coll
Slug Scouten — 2 months ago
Link to the Facebook event pageGet your club together, get some tacos and get down! We’ll have a webcam going at the Zeros shop to keep up with everyone who wants to participateThis is most tacos per member, not how much you can spend but how many tacos you can smash down PER member on average, Taco Bell has always been the standard since it’s everywhere, but do you! Get whatever ya like!Just hope
Slug Scouten — 2 months ago
What about the 45mm M01 kits? Dos has them, they are for the South American variant of the M01, they fit fine on the cases we have, I mean stud pattern wise, you need to bore out the case, and add material for the transfers thoughThey are sold out ATM, but im sure you could email DOS
Slug Scouten — 2 months ago
> paul liedtka wrote:> -------------------------------------------------------> noone? Offers?I just like the bare metal look, but I think we have 30 of these on a shelf somewhere lolnone the less, fair price for a good product! Bump
Slug Scouten — 2 months ago
> Jay Rivett wrote:> -------------------------------------------------------> As long as your kit exhaust matched up to the 28mm header then you will> see some performance improvement. Homoet is a great pipe company I> would definitely trust in their quality. But a circuit is a circuit,> and its performance is low to mid range. They usually top out at about> 10k rpm. If yo
Slug Scouten — 2 months ago
> Terbo Speghetti wrote:> -------------------------------------------------------> The cheeks most definitely move, I should have included that in the> video but the belt is a bitch to get on/offGhaaaa this is awesome!
Slug Scouten — 2 months ago
> Terbo Speghetti wrote:> -------------------------------------------------------> This is def one of the later ones with the toothed drive belt.>> >> That's the rear pulley ass'y in motion like Andy wanted to see. I can't> really start it rn, no gas available and I'm not supposed to be driving> after my concussion. But I swear I've seen it varia
Slug Scouten — 2 months ago
Def a Moby, the few I've fixed were all single speed AV7's with Tomos ignitions, super wildId like to see how it variates!
Slug Scouten — 2 months ago
Damn I need to take better pictures for you lolThis is a very clean bike with a lot of potential, the dos cases are way better then I expected, they are made by Tmp and are an excellent balance between stock and Polini/Malossi, bigger then stock reed block but not massive. They don’t make a case gasket for them and it’s the only issue this bike has, leaky leaky, needs a rebuild, but for the price?
Slug Scouten — 2 months ago
Ive got 2 running Derbi's (like the moped kind) you may want....
Slug Scouten — 2 months ago
Man the leg shield idea is great, I have some ugly radiator set ups on a few of my Peugeots, could you explain what you needed to do to make that cylinder work?
Slug Scouten — 2 months ago
> Graham Motzing wrote:> -------------------------------------------------------> whatever returns the UP to its rightful status as WI's florida!I'm scared of he devastation a Wisconsin Florida man could wreak
Slug Scouten — 2 months ago
Would you hand deliver said items to Toledo!?
Slug Scouten — 2 months ago
> b to the eff wrote:> -------------------------------------------------------> Make Toledo Michigan AgainHEY WE FOUGHT A WAR (kinda) OVER THIS!
Slug Scouten — 2 months ago
Ohio: no longer a placeBut a state of mind
Slug Scouten — 2 months ago
> EH 📣FCC of the QCB wrote:> ------------------------------------------------------->> An Ohio is a Mid-Atlantic state. Just saying………>> Do I need to hide now?Geographically this is a fair argument, but as far as rust-belt culture? Id say its pretty MidwestBut I'm just gonna go with Maize here and say that we aren't real, GHOST STATE, SO SPOOKY!
Slug Scouten — 2 months ago
> Carrie Schreck wrote:> -------------------------------------------------------> I’ll just be really tired of my family calling me a snowflake by Friday> and looking to cleanse the bad vibes with moped hangs>> Zeroes sound cool! I’ll hit them up on igDude I totally respect that, we get dogged a lot for our totally regressive policies, but we city folks aren't that way, hell
Slug Scouten — 2 months ago
bump, Brians cylinder was 45mm and I havent heard back from Adam
Slug Scouten — 2 months ago
the deepest red Ohio? So if you'd actually look at a map you'd notice our largest population centers, which just so happen to house most of our moped clubs are blue, Toledo, Cinci, Columbus, Cleveland, Dayton are all blue, but hey I guess google is tough for ya?
Slug Scouten — 2 months ago
> LSLB RXb wrote:> -------------------------------------------------------> > Slug Scouten wrote:>> > ------------------------------------------------------->> > Switched the timing to 1.5mm BTDC>> >>> > 38 idle/2nd richest setting on w7 needle/103 main/4-petal Malossi reed>> > block/21 PHBG, needs to be tuned more obviously, but so far it’s
Slug Scouten — 2 months ago
> LSLB RXb wrote:> -------------------------------------------------------> ok it’s 224.5 ohms of resistance.>> and what makes you say that andy? have you ran one of these botanas cdi> units on a bike yet? if you have, please share your results and thoughts> on it!>> also i think it’s worth mentioning that timing a CDI without a keyway> can be tricky for even advanced
Slug Scouten — 2 months ago
Switched the timing to 1.5mm BTDC38 idle/2nd richest setting on w7 needle/103 main/4-petal Malossi reed block/21 PHBG, needs to be tuned more obviously, but so far it’s naaasssstttyyyyy
Slug Scouten — 2 months ago
> LSLB RXb wrote:> -------------------------------------------------------> i’m pretty sure you need a different flywheel for that to work with an> e50 and you don’t get to use the woodruff key to time it either. i don’t> know if i’ve ever had one work well for me.>> this cdi from DOS is much nicer then that pietcard unit.>> https://www.doscycles.com/products/puch-botana