Results 61–90 of 294
ATZ — 13 years ago
Eau Claire WI 54701
ATZ — 13 years ago
how much for your cylinder bacon?
ATZ — 13 years ago
hey dont worry about it graham. thanks for all the info. we definetly need to ride whenever it gets warm enough and your in the ec.
ATZ — 13 years ago
read that post already but thanks
ATZ — 13 years ago
yeah dude i think its called be a little creative and see what you can come up with. if you really want a motorcycle look with all the moped benefits get a top tank like a magnum or a g3
ATZ — 13 years ago
ok so I want to do this and I never have. Ive read lots of stuff about it and i have a few questions. What does it mean to raise or lower your port? Since this is my first time doing this should I mess with the port timing? I have a hi-torque series cylinder if this helps. whats the best way to port these babies?thanks
atz — 13 years ago
so i hvae read some past forums and some things in the wiki about boring bings but i still have some questions. in one of the forums a guy said not to bore all the way through the carb just go through one side until you get to the slide and then do the other side. is that true? in the wiki it says nothing about that but it does say you have to clip off part of your slide when your done what does t
atz — 13 years ago
so i have two maxis one has a high compression head and the other doesnt. the one that doesnt have a high compression head has a huge intake port its square the high comp. head has a smaller round hole. could i swap cylinders but keep the same piston? i want to swap because my high comp. maxi is all tuned up with a proma and it rips faster. would the head with the bigger port make me go faster? wh
Ziel — 14 years ago
i picked up a bigger sachs header a little bit ago and its got a bigger outer diameter and inner diameter and its kinda bigger all around. the small one is supossibly restricted.
Ziel — 14 years ago
yeah i'm actually running a little bit rich, i'm constantly on the verge of four stroking.
Ziel — 14 years ago
im working on the sachs/columbia but i think i have it figured out at the moment so thanks anyways dudes
Ziel — 14 years ago
i got stock everything but ive fucked with the jet alittle bit and i have an exspansion chamber
Ziel — 14 years ago
shot your shit dude and thanks for an answer fuck tards
Ziel — 14 years ago
so when im driving my moped and i first start off i have almost no ecceleration until around 15mph and then i plasts up to around 26mph. why? im thinking the jet might be to small.
Ziel — 14 years ago
the only problem is finding one
Ziel — 14 years ago
ok thanks
Ziel — 14 years ago
ok sweet thanks
Ziel — 14 years ago
im thinking of buying the dellorto SHA is that a good call?
Ziel — 14 years ago
the end that slides in the other part of the exhaust is 20 mm
Ziel — 14 years ago
ok ill measure the diameter of the end
Ziel — 14 years ago
well sweet. i hope i can find one of those headers
Ziel — 14 years ago
the larger sweet header will do alot more for me? how much more?
Ziel — 14 years ago
sachs 505 1astock bing carbstock header pipe(slightly shortened)stock everything
Ziel — 14 years ago
So i put this pipe on my sachs moped. (attachment) And i tuned my carb all up, changed the jets. up jetting didnt seem to work and so i down jetted and that worked better. but now im still only going about as fast as stock. around 22-25. should this pipe make me go faster or is it shit? is my carb still tuned incorrectly?
Ziel — 14 years ago
what do you mean by porting it?
Ziel — 14 years ago
so im thinking of buying a dellorto SHA for my sachs engine. is it worth it? what will it do for me? more speed? i do have an exspansion chamber also
Ziel — 14 years ago
ok thanks guys
Ziel — 14 years ago
so i bought an exspansion chamber that slides onto the stock header pipe on a sachs. If the pipe slides on ok and fits. Should i cut off the extra header pipe i dont need? or should it just sit inside the exspansion chamber about 10 inches?
Ziel — 14 years ago
what would happen if i cut the inner header pipe that slides into the exspansion chamber a little shorter?