Results 31–60 of 190
youknowwhat4q — 13 years ago
There are much better things to do to frat parties than pooin' in the toilet tank.If the kitchen is close to an exit pass off food items like pickle jars and ice cream cartons to your friends outside and poo in those.
youknowwhat4q — 13 years ago
Usually I just convince someone to do a flip in to a river that is obviously filled with giant rocks.Oh wait, Topher didn't need to be convinced.
youknowwhat4q — 13 years ago
As an RN the first thing I recommend is setting down the blunt.Rest, water, powerade (better source of electrolytes than gatorade, and if you have a fever you have been sweating them out consistently), and eating light meals frequently.
youknowwhat4q — 13 years ago
Not true. If you live in driving distance of Canada it can be a wonderful birthday.
Chris — 12 years ago
I will be riding from Ferndale there on a ped. If you want to ride with there is plenty of parking nearby.
Chris — 12 years ago
Paint flames on it.But seriously, we can't help you if we don't know anything about it. Is it stock? If so, a better carb or pipe could give you a few extra MPHs.
Chris — 12 years ago
http://cgi.ebay.com/ebaymotors/ONE-39MM-CHROME-POD-PERFORMANCE-AIR-FILTER-AIRFILTER-_W0QQcmdZViewItemQQhashZitem588482f9d3QQitemZ380180298195QQptZMotorcyclesQ5fPartsQ5fAccessoriesJust picked up one of these for mine. Hasn't arrived yet, I'll let you know how it fits when it does.
youknowwhat4q — 13 years ago
!http://img.photobucket.com/albums/v392/Becauseimdead/jawa%20project/061609191658.jpg!Slowly but surely...
youknowwhat4q — 13 years ago
Robert you should join in on our "Fastest Jawa" competition.and by competition I mean two guys in Ypsi trying to get everyone who has a Jawa to go to town making it awesome.
youknowwhat4q — 13 years ago
If Optimus Prime were a moped...
youknowwhat4q — 13 years ago
You could try a high compression head as well as a smaller rear gear...Might get you enough "umph"
youknowwhat4q — 13 years ago
A high Comp. head is totally reversible, should you want to make it stock again.You might be able to squeeze a Dellorto under the side covers... But don't quote me on that.and the black and chrome pipe would look pretty rad.
youknowwhat4q — 13 years ago
That's what I'm thinking. If that is the case then it will still sputter if/when started hot.Assuming it is, then it could be as simple as a new gasket set and a little sand paper.
youknowwhat4q — 13 years ago
My personal opinion is that Sabres are far too pretty for most of the performance pipes. If Motomatic could make you something that looks stock-ish but performs better that would be rad.
youknowwhat4q — 13 years ago
"Pipe":http://www.treatland.tv/puch-tecno-bullet-pipe-in-chrome-p/puch-tecno-bullet-chrome-pipe.htm"Carb":http://www.treatland.tv/puch-malossi-SHA-carbuetor-kit-p/puch-malossi-carb-kit.htmUnless you plan on racing that beast you shouldn't need any more than those.So far as the timing goes, use the force it's always worked for me.
youknowwhat4q — 13 years ago
Do me a favor, run it until it gets bogged down, then shut it off immediately wait 30 sec and start it back up.Let me know what happens.
youknowwhat4q — 13 years ago
Paint flames on it.
youknowwhat4q — 13 years ago
So I'm also thinking that I might go for an different carb...Maybe something a little bigger than a 14.12 and boring the intake a exhaust a bit. So that it will put out a little more power especially since I'll be weighing it down with the new fork, bigger carb and of course my fat ass.I'm really curious how far up I can go with out it being over kill?And since I have a decompressi
youknowwhat4q — 13 years ago
I could always modify a mini-bike sproket I don't think I have ever seen one with less than 32...I'm am beefing this thing up in every way possible, other than kitting it (because I don't need anymore headaches.) so I might be able to get away with it.
youknowwhat4q — 13 years ago
hmmm.... maybe not even have to weld, just readjust the position of i (from bottom to top/vice-versa)Could work, but I'm going to have to check a few things out first.Great idea, please keep them coming!
youknowwhat4q — 13 years ago
Sounds pretty awesome. Can't wait to see pics.
youknowwhat4q — 13 years ago
That looks awesome.Where did you get the handlebar clamps?
youknowwhat4q — 13 years ago
Secret eh?That caught my attention.Thank you for the pic help btw.
youknowwhat4q — 13 years ago
Also!Regarding the pic of the pistons.Old one is on the right and the brand spanking new one is on the left, but (sadly) the new one didn't come with a ring, can any one eye-ball it and let me know what to look for?
youknowwhat4q — 13 years ago
The shaft is just a hair over 5 7/8th IN. Unfortunately I have no other bikes here (I'm working on it at my dad's place) to measure it up to.Got some pics for you:http://img.photobucket.com/albums/v392/Becauseimdead/jawa%20project/061609180814.jpghttp://img.photobucket.com/albums/v392/Becauseimdead/jawa%20project/061609191144_01.jpghttp://img.photobucket.com/albums/v392/Becauseimdead/ja
youknowwhat4q — 13 years ago
Rockin' That was one of the bigger things I wanted to replace, The standard Jawa for is pretty flimsy and doesn't have much play in the suspension.Do you happen to know the measurements/could you (or anyone really) find out?I'll measure up the Jawa and post it, though it might be a while because I'm goign to be in Chicago all week.
youknowwhat4q — 13 years ago
That exhaust is down right silly.I kind of love it.
youknowwhat4q — 13 years ago
So I'm in the process of "pimping" out a Jawa Supreme 3 (http://www.mopedarmy.com/photos/brand/25/2924/)And I'm wondering if anyone has had success on putting parts from other brands of bike on it.I'm planning rigging up a Dellorto 14.12 with a fancy air filter, and at some point putting a bi-turbo on it.It's the little things that I'm trying to figure out now.
Oi — 15 years ago
oops my roommate was signed in....
Alexis — 15 years ago
I don't have the time nor equipment to weld it but I do have the funds to buy it if some one else can weld it....