Results 61–90 of 275
Ok I just got it. Its nice and short. Only 2 1/2" at the longest part. Basically just a 3" x 1 1/8" peice of foam on a adapter. The opening is a hair over 2 1/4". Lets see if it fits.
Someone on here said they found a solution but I cant find the thread. Anyone know who it was? Here's what I'm thinking. Have the pads resurfaced with better material and having the discs turned with some kind of pattern. Im sick of slipping. Especially on a low mile bike. Anyone have any good fixes? Ive tried motor oil and scuffing the pads and discs. All temporary fixes.
Ill post pics and dimensions when i get it.
Yeah and then it 4-strokes all over your fender. Then you gotta leave it alone for like 10min.
the guy says he uses it on the 14 and 14.5 SHA. Same size right?
Apples are good for teeth but if you want serious speed get gold caps encrusted with ice.
I ordered it well see. Seemed pretty cheap too.
Did you modify the clutch?
Mike is that a G3 frame? Can I see the rest of it?
Where did you get the 70cc from. I want one.
There is another brand of jet that works with that carb. They use a completely different numbering scale so you have to cross reference. I want to say its a Dellorto but I'm not sure. Call Shaun at Myron's mopeds he can tell you what it is. He also has a conversion chart that cross references all brands of jets and drill sizes.
Im putting a 16mm Dellorto on a Sachs G3 with a techno bullet exhaust. What jet does it come with and what do you think I should start with? Thanks
OK I just picked up a G3 and rebuilding the clutch, honed the cylinder, port exhaust and intake, flipped the intake, gonna put on a dellorto 16mm, techno bullet exhaust, clean points, new tubes, tires( down to 2.5), chain, flipped the bars, putting on a bullet head light and speedo, switching rear brake to cable, new spark plug and cap. Anything else those bikes generally need? Also what jet do th
High stall mod? Tell me more.
Will these work?http://www.customdynamics.com/motorcycle_led_bulbs.htm#32_LED_Replacement_Bulb
Does he ever go full throttle? Because all I here is its to scary.
Has anyone tried these 6V LEDs or has anyone found one they they know to work? Would I still need a resistor and or regulator?http://www.superbrightleds.com/cgi-bin/store/commerce.cgi?product=OTHER
Has anyone tried those plates from treats or playing with the fluid? I tried 10w30 synthetic in there. It seemed to help for a bit but now it feels like the plates polished up again.I decided against this kit. Doesnt seem like it will be worth it. A lot of negative feed back. Just gonna keep modding the stock cylinder.Has anyone come up with a simple forward facing intake for this motor (504)? I
This is the only kit I can find.
$75 you lucky bastard. Try $500 on west coast.
You can get it to 50 if your skilled. Nice bike. Search the threads. This has been covered. Start with a pipe, jetting, high flow filter. Then keep reading. Look into gearing, porting and other mods.
Decided to go 80cc on my sachs 504. Any advice for a clutch mod? It does have the clearance right? Anyone have one on a sparta foxi? Looks like plenty of room to me. Anyone know what jet I should start with? Carb advice? Heres what i planning:Athena 80ccDelorto 20mm Should I get the racing model? Are there better filters?tomos Bi turbo I already have on there.
Just wondering if anyone has advice, maps, pictures, links, videos drawings, or anything specific for this motor. Its my first time and i would like to have a plan or something to look for or compare to. Also what can I expect after porting aside from jetting? Anything I should watch out for?This is going to be done to a 1977 Sparta GT with a bi-turbo and open air box
I modified a tomos bi-turbo to fit my sparta foxi with a 504 engine.
What kind of motor do you have? I have the 504 on my sparta and I modified a tomos Bi-turbo to fit. Im guessing your gonna have to replace the exhaust and intake since the kit will have a different bolt pattern and yes you will want at least a 15mm carb for a 70cc kit and you will deffinately want a pipe to really use a 70cc kit. Where are you getting the kit from?
Damn I didnt want to hear that. I just bought a second one because I broke the first one trying to clean that float needle.