Results 91–120 of 6463
SABAT! andDestroy — 4 years ago
For puch polini or whatever on tomos aplicationsNew condition$200 shippedHad it for a while build never happendHolla
SABAT! andDestroy — 4 years ago
Will come if someone can buy one of my bikesCasal sprinter runs nice rare AF in USA $500Have the benelli firball magnum 3 spd handshifty on 8” snowflakes (goes faster than what is safe, everyone smiles at you wherever you go) $800(Will need one of these for rally prolly but after have at it)93’ suzuki RM80 rebuild project , needs crankshaft $200I will sell my batavus gran prix roller for $750I hav
SABAT! andDestroy — 4 years ago
I has plans for the rear fender but you can has for the package deal of 300 shipped . Thats what i bought it for probably 9 - 10 years ago on yhe buy/sell HollaTank 120 shipped , two mostly unoticable dents in the ussual spot from meeting handle barsSeat is a front latching derbi variant sle type 60 shippedFrame/swingarm for 150 shipped , has a derbi vin punched into it i have a prev reg. In my n
SABAT! andDestroy — 4 years ago
I use these alot , you can mount them easy enough to any car that has a steel bumper underneath its cover if you trim some of the plastic away. in the case with 2nd gen voyager i welded some tabs on for the hooks to catch, also youll need a pair of hooked turnbuckles , or ive used a ratchet strap too before on the underside ... with my 2nd gen geo metro that had a fiberglass bumper i welded down t
SABAT! andDestroy — 4 years ago
Yah i have a frame and its not even a roller id let got for 750 local pickup just saying , cant wait to build it
SABAT! andDestroy — 4 years ago
I have a 16” kinetic with 1 speed tran
SABAT! andDestroy — 4 years ago
Selling my daily dt50lchttps://portland.craigslist.org/mlt/mcy/d/1988-yamaha-dt50lc-ultimate/6739269624.html$1350 i love it its titled as a moped . I could potentially deliver this winter like jan/feb
SABAT! andDestroy — 4 years ago
E50 and 12v bosch are sold ,Ill probably start a new thread soon , let this one die.Still for sale is the top plate 20 and i have two 70cc puch kits for sale on the cheap 50 eachMaxi KickstandsI have one thin wall rear wheel , with sealed bearings 50 shipped
SABAT! andDestroy — 4 years ago
Whats it take to convert to variated??Other perks is the big wide brake shoe in there .> Dirty30 Dillon Wrote:> -------------------------------------------------------> Won't fit a Vespa Transmission without modification, though.
SABAT! andDestroy — 4 years ago
Deff stronger than any vespa spoke or magIt has a one speed transmission in it , 65 shipped .
SABAT! andDestroy — 4 years ago
Yeah its a rito, i would make a deal and ship with the ignition for 200, i just dont have any puchs anymore..> Dmitry K. Wrote:> -------------------------------------------------------> Is this right: E50 clutch shoes worn, no pressure plate, no ignition?>> What kind of crank is in there and used for one rally ONLY?
SABAT! andDestroy — 4 years ago
I have a speedo cable 7 shipped , its old n used but spins finePp steven@mopedarmy.com
SABAT! andDestroy — 4 years ago
I have decided not to build my a35/a55 back up, offering my collection of partsI have newAmal carburator or sha carbMlM cali flatport (bolt on /tuned for this setup)Trac dailiem 16mm left side shot intakePolini reedsA55 crankshaftNew high rpm , 7 degree retard cdi boxUsed A55 CasesUsed A35 stator / magnetoUsed puch polini cylShould have a whole transmission and whatever hard parts needed to build
SABAT! andDestroy — 4 years ago
Its all there i guess , the cover can hold on as is , but you should weld/ epoxie itGet hurt box and hardware for 33 shippedPp steven@mopedarmy.com
SABAT! andDestroy — 4 years ago
Its Hurt and needs some help , ive had it for years and used it on my first cross country trip . Id ship it for 40 bux as is , or since im looking for work , i can re stitch it where its falling apart for some additional labor , estimated at 50 bux lmk
SABAT! andDestroy — 4 years ago
175 shipped for the e50 its been tested , run for a whole rally , no case matching new crankshaft , bearings seals , i have most of the transmission , needs a starter plate , and set of clutch shoes .Selling 12v ignition seperate 50 shipped, again tested , works great , good original condensorHave a bunch of kickstands 17 shipped all maxi leanth70 kit in fair shape 8/10 not many miles until crank
SABAT! andDestroy — 4 years ago
I think i have a box and a cover from a bravo isfthat works the same on grande ? Pm me dont need much for em..
SABAT! andDestroy — 4 years ago
my benelli is a 250-d i guess? i ported it some , made a garelli VIP / bi-turbo pipe , slightly taller gearing and it goes 40! rolling on 8" snowflakes too
SABAT! andDestroy — 4 years ago
More
SABAT! andDestroy — 4 years ago
$200 I have a rebuilt 84’ e50 bottom. Rito crank . needs a bell starter plate and the clutch shoes are roasted no case matching$35 used k star 70 kit$40 12v points ignition in working order.$$20 maxi top 7/8th fork plate
SABAT! andDestroy — 4 years ago
$180 I have a rebuilt 84’ e50 bottom. Rito crank . 300 miles needs a bell starter plate and the clutch shoes are roasted no case matching , $35 have a used k star 70 kit , have a 12v points ignition in working order.$ 40 have a maxi top 7/8th fork plate$20
SABAT! andDestroy — 4 years ago
hey do you still have this? kickstart V1? mine has a bad left side case half .
SABAT! andDestroy — 4 years ago
AM not, im deep in the red from Bakers dozen . gotta work if you know any NYC cats going , get em to come by the shop
SABAT! andDestroy — 4 years ago
Pics of 45 and 28 t sprockets 20$ each plus shipping
SABAT! andDestroy — 4 years ago
try polishing it? typically you can machine that surface as well as the inside surface of the inner cheek and bushing to (get closer ) squeeze the belt more.. idk maybe its got a hole in it haha GL
SABAT! andDestroy — 5 years ago
New adds on mopedarmy are fire
SABAT! andDestroy — 5 years ago
hah i sold you that tank years ago, let me know whats good with that derbi , its kinda my jam! maybe trade ya something cool ontop!
SABAT! andDestroy — 5 years ago
lots of the ignition coils from failed treats puch cdi's made it onto bosch stators for brighter lights.
SABAT! andDestroy — 5 years ago
Clutch problems would include the engine revving out and you not moving . Also wrong forum , repair might get more attention
SABAT! andDestroy — 5 years ago
Here is a complete , more shiny unit with all the bearings circlips shims for 55 shipped