Results 1–17 of 17
Tyler Scranton — 3 years ago
Still for sale? I'll be in CBus this weekend and would like to check it out.
Tyler Scranton — 3 years ago
I'm following this one, just out of curiosity.Isn't it gonna smell like reefer as your brappp around? :D
Tyler Scranton — 3 years ago
> Don Ohio Wrote:> -------------------------------------------------------> > Benjamin The Wandering Pacer Wrote:>> > ------------------------------------------------------->> > > Charles McCusker Wrote:>> >>> > > ------------------------------------------------------->> >>> > > I'll try to get you a picture of how a p
Tyler Scranton — 3 years ago
He responded to me just fine.... I got a set of decals on the way from him. Great guy and super knowledgeable about these bikes
Tyler Scranton — 3 years ago
Slapped in a #61 main jet and hit 32!! Still gotta replace the seals, and do a couple plugs chops to make sure I'm running good, but other than that she's performing great! Thanks everyone!
Tyler Scranton — 3 years ago
Oh man. I gotta hop in on this. Any chance I could purchase a set as well? Mine are completely gone. A fresh coat of paint and some decals would work wonders.Thanks!
Tyler Scranton — 3 years ago
Welp, there goes $60....Really had to stop myself from buying a new pipe. But I'm sure that's gonna be coming up soon.
Tyler Scranton — 3 years ago
Sweet! Thanks! Ordering tonight and should hopefully have her purring by next weekend!
Tyler Scranton — 3 years ago
> Don Ohio Wrote:> -------------------------------------------------------> Yes, you press or gently tap them back in.https://www.treatland.tv/ProductDetails.asp?ProductCode=puch%2DZA50%2Dseal%2D17x35x7&CartID=13Is this what I need then? Just want to make sure I'm getting the right ones, since there's about a dozen on Treatland for the M01.Really appreciate all the help!
Tyler Scranton — 3 years ago
> Full Tuck Wrote:> -------------------------------------------------------> Definitely replace the seals. I managed to pull mine out by drilling a> tiny hole, screwing in wood screw, and then yanking each out.Do they just press back in? Hoping to be able to do it without tearing the bottom end down too much.
Tyler Scranton — 3 years ago
> Full Tuck Wrote:> -------------------------------------------------------> Mine Still has the stock mesh filter and box, though I pulled out half> the screens and those lil plastic cylinders. Also installed mlm circuit> pipe, one of those 3d printed sha slides, and I think I'm currently at a> 66 jet.>> Probably doin 30mph now with far better acceleration throughout.
Tyler Scranton — 3 years ago
God damn dude. Glad you're alright.Since I got my bike, people seem to think my full face helmet is overkill but, fuck, cars will hit you at the same speed no matter if you're on a moped or a liter sport bike.Hope your recovery isn't too bad and his insurance pays up.
Tyler Scranton — 3 years ago
I started messing with the jetting yesterday after getting a set of 50 range jets from Treatland. It was happiest with the 58 in there, but didn't want to idle. That said, it was brapping noticeably better with that size. Spark plugs still looks like it's running lean though, and it idles better with half choke.From what I read, these clone SHAs actually come with a main jet around #68.
Tyler Scranton — 3 years ago
> Benjamin The Wandering Pacer Wrote:> -------------------------------------------------------> What is your sprocket gearing and what model of engine do you have? MO1> or MO2?It's the M01. Not sure on the gearing. I'll have to count it when I get home.
Tyler Scranton — 3 years ago
That seems like a likely culprit. Hopefully the job isn't too bad? Dont wanna tear the whole thing down if I can avoid it.
Tyler Scranton — 3 years ago
Hey y'all. New to the moped world, so forgive any noob mistakes.I recently got ahold of a 1979 Pacer Deluxe. I finally got it running pretty reliably, but I'm only hitting around 23 on it. From everything I've read, I should be hitting closely to 30 in stock form. And it is SLOW to pull off the line.Running a Delorto clone 14/12. Jet is around a 58 or 59. It wasn't marked on th
Tyler Scranton — 3 years ago
Are these 3D printed? Any chance that I could get ahold of the STLs for personal use? I'd like to be able to print them and experiment with them a bit for my own bike. No reselling, obviously.