Results 1–30 of 129
I got the bew treats 70cc low compression head so im hoping it helps keep the compression down.but not too much
ive purchased a 70cc head and new plug from treats.and im going to get one of those cdiswhile i wait for the parts im gonna see if i can borrow a compression tester tomorrow.and also try and get a leakdown on the casethanks for all the info
just let the bike idle for about 15 minutes.gradually creeped up to about 290-295gave it a few revs and it got up to 309 and hung around 300 or so until i shut it offis this hot?ambient temperature here today is 79
yes im running stock yt60 piston.as for compression i will try to get my hands on a tester this weekend.im going to look for a cdi to purchase. i guess anything for a jog will work on a qt50?
Injection is still working.i cannot source and air leaks ive tried spraying the motor while running and no difference.as for the exhaust im not sure if changing it will help with cooling. I will post oics lateralso i read that the yt60 cylinder with qt50 head will hit the pistin and raise the compressiontoo much.
i dont believe the timing can be adjusted on the qt50.also i did use a temperature probe when i first got the kit.i was getting 400 plus degrees at idle but once i went up to a 7 range plug it dropped to the 330-360 range.i then added another headgasket in hopes of dropping the compression some but i dont think it was enough
got an 86 qt50. after cleaning the exhaust and giving it a tune up it ran mint.shortly after i installed a 60cc kit with the stock head, bike soft seized twice. no matter how rich i tried it always kept getting hot.my current setup is yt60 jugqt50 headngk bp7hs plugpw80 carb (jetted rich)and a pocket bike muffler welded to stock header.bike runs pretty good.occasionally will bog at wot because its
i have a puch maxi 2hp..i was wondering where i could find a 70cc kit for it and how hard it would be to install in onto my ped?thanks for any help
i need some help with my ped. Everythign works fine except for the headlight. I we3nt really fats into a trail once night and heard a loud SNAP or somehtign and my light went out. Since then ive gotten it to work manhy times by just adjusting the connectors or shaking the healdight around but now im stumped. The bulb it still fine and i replaced all the metal connectors and im still not gettin any
like a healdight for a car?
Does any1 know what model i need to look for when purchasing a new light for my headlight/
Did u make sure the gas was on? it sonds stupid but when i mess aroind with m friends i turn their gas valves off and sumtimes they wont notice for a couple days until i tell them lol
What would the steering lock piece be called if i wanted to go to a hardware stoere and buy one? Casue im checkgin online but there like 78 pages of items with the name "lock' in it, so im lookin for a technical name lol
yea just go hit up a motorcycle store and throw a regular tire on.
i got this 85 puch moped. I know every1 will say the bulb is burned out, but i got it with only 500 miles on it so i know it wsnt used hard, and im sure the ligh wasnt on 24/7, anyway does anyoen kow a wasy i an fix it without replacing the whole light/ cause i don know where to buy an entire headligh lol
its actually the part on the handle by the brake
can anyone send me a link to what an electrical fittnig for a brake light connector looks likethanks
u mea like a standard 9/16 inch bicycle pedal? if so im, gonna do that cuz i havesoem nice pedal sjust lyin around
Are there any like loca stores that woudl sell chaing that would fit a moped?
electrical fitting? Can you send me a link to what these look like
well it look slike ti just snaps in but it wont anymore, like te part right on the handle bar
im tryin to but it doesnt seem to like click in
by brake light connector disconnected does anyone know how to fix it?thanks
Does anyone know what i can use to go in palce of those bars which hold the fender straight over the tire? Mine were too small for my new tire and when i tried to bent it bigger it snapped
regardless...im still looking to find a moped
i dont have alot of money, but depends on how much you want, and how long you can wait...if you got something cheaper i can get it within a week or soi appreciate it alot if you can hook me up with oneyou can email me at firstname.lastname@example.org