Results 1–22 of 22
Tanner Barb — 1 year ago
Bump
Tanner Barb — 1 year ago
Bump
Tanner Barb — 1 year ago
Anyone at all? One for sale?
Tanner Barb — 1 year ago
Welt title says it all, anyone have a a35 flywheel cover without oil injection for kick start they want to separate with? Part #223471
Tanner Barb — 1 year ago
Alright I finished the wiring today and it’s timed at 1.7mm btdc seems to be running good!
Tanner Barb — 1 year ago
> LSLB RXb wrote:> -------------------------------------------------------> if it's kitted, you'll want to time it nice and low. somewhere between> 14 and 16 degrees BTDC (you'll be revving out all the way in first gear> for sure and want it to be timed right then as well as at WOT.)>> This correlates to between .79mm and 1.03mm BTDC on a 43mm stroke, 90mm> c
Tanner Barb — 1 year ago
What timing would you recommend? I’m running airsal 45mm, vm20 carb, treats street head, weekends intake, and jammer clutch.
Tanner Barb — 1 year ago
Getting closer to finishing the tomos build, and last minute decided to get the powerdynamo cdi for it. Wanted to ask if anyone has any pointers on the wiring. Any tips would be great! Thanks y’all!
Tanner Barb — 2 years ago
Okay, I’ve read through this a couple times and I’m still a little lost. I have a led tail light I’m putting on my 2000 tomos lx, after reading I was going to do the diodes but idk what kind? Could someone point me in the rite direction? I’d really appreciate it
Tanner Barb — 2 years ago
How much for the lot?
Tanner Barb — 3 years ago
Who is making the 2nd gear jammer clutch!? I would buy it from you if you made one
Tanner Barb — 3 years ago
So I have my parmakit setting on my a35, I knew the case was going to be to small but wanted to see how bad it would be, it’s smaller margins then I was expecting. Before I split the case and weld some on the outside to build material I wanted to know if my a35 kick start guts would just swap over to an a55 case? If so that would be way easier.
Tanner Barb — 4 years ago
If I’m going through the trouble of making a new harness I’m not going to use my old connecters. And I need the original style connectors because of headlight/ horn/stator/ ect. I can’t change those so they have to stay the same. But it looks like that site might have what I’m looking for!
Tanner Barb — 4 years ago
Okay so I have 2 used harnesses for my tomos lx and am not happy with the quality due to the age of them so I want to make my own, all of witch is easy except I can not find new wire connectors anywhere that match These! Does anyone know where I might be able to find some? Looked at at least 6 web site for auto wiring and can find a ton of connectors but not these. Also if I can find a supply I�
Tanner Barb — 4 years ago
Why you gotta put down mopeds lol but yeah I know there just small 2 strokes but considering I’m doing an all out build and running VP racing fuel I feel like the ease of tuning would be great!!!
Tanner Barb — 4 years ago
So in my search for my build I’m debating between a smart carb or a lectron, I had never heard of them before about a month ago and all the research I have done shows them to be pretty great! But I haven’t seen anyone post about it on here so I wanted to ask if anyone has any experience with them? They are definitely pricey but if they save on gas, lower edmissions,make about 1hp over conventional
Tanner Barb — 4 years ago
Yes! Perfect. Do you make them?
Tanner Barb — 4 years ago
Looking to buy the fauxmos engine mounts. Anybody have any for sale! Or anyone making them ?
Tanner Barb — 4 years ago
> Dirty30 Dillon Wrote:> -------------------------------------------------------> > Tanner Barb Wrote:>> > ------------------------------------------------------->> > I also like that it Italian in keeping with the bike.>> Your bike is Slovenian, notHaha yes I'm aware, but they are rite next to each other. More so than getting parts from Mexico
Tanner Barb — 4 years ago
When I get home I'll try and find a pic on my old phone if it, rite now I have the engine dropped but if I can't find a old pic of it I'll just take a pic without the engine, that weight is with a empty tank but that's only a couple pounds. And I'll try and make a list of everything I did to it to drop the weight
Tanner Barb — 4 years ago
Yes I understand it will require some work but that’s what I’m looking for, I like top quality. When I do something I need it to be exactly rite and how I want it. Anything less and I won’t be happy. I’ve done a lot of research on all the kits and in my opinion it the cleanest best casting kit out there, I also like that it Italian in keeping with the bike. I was looking at the exhaust you mention
Tanner Barb — 4 years ago
Okay, to start I’m new to the forum I’ll give you a little back story so you know where I come from with this build. I’ve had this bike for 8 yrs, bought it when I was 16 and have just always had it around to tinker with in my spare time in between projects, haven’t messed with it in about 2 year. Got married moved around but now I’m getting it back out and doing the full build I wanted to do but