Results 1–14 of 14
Mark Crowder — 3 years ago
Thank you , when you say late model which year would you be thinking of?
Mark Crowder — 3 years ago
Hi Can anyone help with information on this franco morini reed valve intake flange. It has an external diameter 18mm and internal 14mm carburettor mounting hole. It has the numeric FM 76A on it and the franco morini part number is probably 25.1076I think it may be an S5-GS KTM Pro Junior engine. Anyone recognise the part on their bike please. Thank You.
Mark Crowder — 4 years ago
Is anyone able to say where I could download a document with the Franco Morini original part numbers for the UC4 engine or get hold of a copy of the Franco Morini part numbers catalogue. I have an engine diagram but need the actual part numbers.Thanks if anyone can help out.
Mark Crowder — 4 years ago
We have a small stock of original Franco Morini M02 Clutch Cable Extenders and Cable End Trunnion at http://www.mopedbuglimited.co.uk/If anyone needs one its on the website under BSA NVT Easyrider Engine partsBSA NVT ER2 Easyrider Clutch Cable Extender 09-0719and MO2 cable end BSA NVT ER2 Easyrider Starter Cable Trunnion 09-0523 Engine End £14.99 GBP each plus postage fully tracked to add on.
Mark Crowder — 4 years ago
Thanks Don, i take it there is no one has a supply of these in the USA i am posting from Britain.
Mark Crowder — 4 years ago
Yes its just a ring with 20 ball bearings in it , it fits in a cup which moves along a shaft when you pull the clutch/starter lever
Mark Crowder — 4 years ago
Does anyone know of a supplier of thrust bearings for Franco Morini M02 engines.It does not seem to be an off the peg standard size , so was presumably made by or especially for Franco Morini. As far as my slightly wonky micrometer will allow it is 47mm OD 36mm ID and about 4mm thick depending on whether you include the thickness of the ball bearing or not. The whole thing has 20 ball bearings. Th
Mark Crowder — 4 years ago
Benjamin thank you very much for replying and showing us your fantastic Pacer Website, lots of good info in there. Regards Mark.
Mark Crowder — 4 years ago
Does anyone know where you can get a catalogue or list of the Franco Morini part numbers for the M1 engine (as opposed to to just an exploded engine diagram)Thank you.
Mark Crowder — 5 years ago
I now have a spring , many thanks to all who have posted a reply here.
Mark Crowder — 5 years ago
Thanks Stephen I have obtained a used spring from dos cycles I appreciate your help.Regards Mark
Mark Crowder — 5 years ago
Is anyone able to identify which make of bike this speedodrive is fromIt came in a bag with made in Japan on it. It also had a part number 743.0410.00 or 743.0410.000 on it. Maybe someone will recognise this format of part numbering.The spindle hole is 15mm I think. They were in a box of parts from the 1970s 1980s so could be greater than 30 years old.Thanks for your time any help appreciated.
Mark Crowder — 5 years ago
Thanks for your post Stephen. I have emailed doscyles. The spring in the link to ebay is not the right one as the M1K spring is external not internal as in the ebay pic. Regards Mark
Mark Crowder — 5 years ago
Can anyone help find a seller of the kickstart spring for the Franco Morini M1K engine shown in the attached picture. It is on a BSA Junior childs bike from around 1980. The kickstart is depressed in a backwards motion rather than the forward kick motion.I am trying to get this bike on the road for a Christmas present, so far with no luck.Thanks for your time.