Results 1–30 of 37
David Conn — 2 years ago
haahha indeed it is or was! just found a punch and drove her out... im a little ashamed I didn't think of that earlier
David Conn — 2 years ago
this is a stupid question for the more seasoned wrenchers. Im installing new tires on my korado. ive put new tires on all 5 of my bikes and its simple. the rear swing arm on these is not open, so you cant just loosen the axle nuts and remove the brake cable and slide the wheel out. I have the chains off, the brake cable off, and the axle nut off. I thought the axle bolt would just slide out unfor
David Conn — 4 years ago
The other day I bought an early Christmas present for myself. This 103, Its the u2 25 mph motor. It runs great and is quite easy on the eyes. It's only issue is the lights, the previous owner had installed the le partie cdi and removed the voltage regulator and never got around to dealing the lights. I am horrible with wiring. I was just curious if someone has a picture of how they wired
David Conn — 4 years ago
It does variate. Looks pretty wild swinging back and forth. Definitely quite an interesting design. The tank and the fairings are also a pleasing design. I was exstatic when I saw it on marketplace it was advertised as a 78 bavatavas moped. I said to myself " that ain't no starflight, that's special"
David Conn — 4 years ago
I'm pretty proud of " the dutchess of money pits" she's probably my favorite bike I have now. She's gonna be a ripper when broken in! I need to work out some issues it still has mainly getting the lights to work. I rebuilt the 103 motor and initially put a Doppler 50cc kit, a Doppler crank, the lepartie cdi unit , a Sha 1616, I believe Athena reeds, and derestricted the
David Conn — 4 years ago
Thanks for all the help from everybody regarding this motor and cdi. I have the the bike running now and she is torquey, quick and nimble. Although I may have a leak still, hopefully just around the intake and carb. Haven't checked yet. Anyways I have no lights. The horn works which I have wired in with the lights. I have a ground on it, should I ground the lights more I'm unsure if the
David Conn — 4 years ago
I was too lazy to read the whole article the first time. 12oz per gallon! Sorry
David Conn — 4 years ago
What was the acid ratio you used? Por how many ounces?
David Conn — 4 years ago
Awesome thanks allot!
David Conn — 4 years ago
Please bare with me, I have looked for the answer to this question but couldn't find an answer. Are you supposed to use sealant on a 103's base gasket? Also I have a polini cylinder with 2 piston rings . They appear to be the samee does one side go up or down? Thanks!
David Conn — 4 years ago
Beautiful bike, the french sure know how to make an elegant bike. Just curious what jet are you running with the 16 Sha?
David Conn — 4 years ago
Found one one treatland. I shouldn't have been so specific
David Conn — 4 years ago
It's the 11 x1.0 nut it looks like it may come in that set. It's the nut on the crank
David Conn — 4 years ago
Hello, I'm in need of a Peugeot 103 variator nut. I stripped the threads somehow and it's now ruined. I can't find a new one on any of the moped part sites in the states. Thanks!
David Conn — 4 years ago
Awesome, I used some blue on those bolts. I think I have the timing right on the money then. The wooddruf key on the crank lines right up to that mark after using the micrometer. Thanks!
David Conn — 4 years ago
I was curious as to if this was a timing mark? Thanks
David Conn — 4 years ago
Never mind I found my other one!
David Conn — 4 years ago
Hello I'm in need of those 2' plastic bushings on the engine mount. Treatland is out of stock, and I can't find them anywhere else. Thanks!
David Conn — 4 years ago
sorry I might have asked for the wrong side. what is the size threads on magneto side? its a stock large taper crank. thanks again
David Conn — 4 years ago
Thankyou cheetah!
David Conn — 4 years ago
I was hoping someone off the top of their head knew what size threading is on the end the varitor connects to?. I messed the first thread up and need to get a die. Thanks!
David Conn — 4 years ago
awesome pm me. thanks
David Conn — 4 years ago
I want a puch trucker hat!
David Conn — 4 years ago
thank you sir!
David Conn — 4 years ago
hello I just ordered the le partie cdi from treats for a motobecane with the Peugeot adapter plate. I am looking for a wiring diagram. I searched and found some for the motobecane, but not the Peugeot. is the diagram different? if so does anyone have one drawn up? thanks for yall's help
David Conn — 4 years ago
And good luck!
David Conn — 4 years ago
Tell the scrap yards to be on the lookout
David Conn — 5 years ago
Hello i need to get a rear fender for a pinto I bought. I was wondering were maxi fenders the same? I,searched high and low and cant come up with the answer. Thanks everyone
David Conn — 5 years ago
Hello I'm in need a seat post and rear rack for a 78 pinto. Thanks everyone!
David Conn — 5 years ago
Oh and sorry again I ordered one of those trail tech cylinder head temperature guages. What would an overheating temperature be at? I think I read somewhere here which I can't find now 400*f. Is there a general rule how many degrees the ignition should be retarded or will I have to play around with it? Thanks again