Results 1–30 of 43
Marc Andre de Seve — 3 years ago
Is it still for sale?
Marc Andre de Seve — 3 years ago
Piston is jammed in the engine... Gonna Pb blaster that to see if it finally un jams
Marc Andre de Seve — 3 years ago
Put the rims on an forks
Marc Andre de Seve — 3 years ago
Getting closer to putting down the base coat so I can add the metal flake
Marc Andre de Seve — 3 years ago
I actually got it to fit on of the welds was preventing the fork tab to fit in... Just messing with the bearings and axle to make it smoother...
Marc Andre de Seve — 3 years ago
So there is a hole.. However the brake light switch definitely won't fit in the hole... Maybe a custom mod will can make it fit but I dunno..
Marc Andre de Seve — 3 years ago
Yup I will do sorry just been jumping back and forth through projects... Gotta stick to one only did a quick prime job on the 40
Marc Andre de Seve — 3 years ago
Yeah maybe it is the weld that crappy perhaps I can grind it a bit or file it down to see if it will let it sit further down... Good call
Marc Andre de Seve — 3 years ago
I think it has a hole for the brake light switch incorporated in it... Yup the s off treats... They look ok but quality is far from the original... Yeah the two tabs Ar what are to big for the leleu puch brake slot
Marc Andre de Seve — 3 years ago
Makes the shock on one size higher which make the wheel rub... Have to grind either the fork brake tabs or open up the brake plate... Which is better... I'm going with brake plate
Marc Andre de Seve — 3 years ago
Stupid brake hub to small have to grind it down to fit
Marc Andre de Seve — 3 years ago
I used a impact socket.... Can't remember the size... I will go in my garage and let you know the size Tom can't Remeber if it was a 36or 32 mm
Marc Andre de Seve — 3 years ago
Yeah it's just for screwing around with if I want to have the daily comfy drive the sp94 is the bomb... Seat is like riding a cloud.. Meant for my arse
Marc Andre de Seve — 3 years ago
Yeah maybe I need to make some kind of custom made bar or something... Gonna let my brain work on it for a bit... Have to put new cables everywhere and tackle the decomp wire... Figure out how that works..
Marc Andre de Seve — 3 years ago
Anyone have a trick to make the brakes work on these ebr front shocks... They have two tabs that seem like they may get in the way... Or do folks just do a total break delete job
Marc Andre de Seve — 3 years ago
Had to chop the pipe a bit to fit the bracket of the bike... Frenchie bikes never come out the way one plans in the head twice the time for everything
Marc Andre de Seve — 3 years ago
Friggin pain in the ass
Marc Andre de Seve — 3 years ago
Yeah getting rid of the fenders and front suspension... Just trying to have a bit of fun with it
Marc Andre de Seve — 3 years ago
Made a stupid spreading tool cuz. I messed up my steering wheel puller trying to get the damn forks off... Don't even try and pry em off just go to your local hardware store for less then 10 bucks... Cost me a steering wheel puller
Marc Andre de Seve — 3 years ago
Removing the forks
Marc Andre de Seve — 3 years ago
Finally started putting time into this yellow moped
Marc Andre de Seve — 3 years ago
Putting my ebr on now but it seems that I have a bit of loose when install em have any tips to make em. Tight maybe I am missing a step
Marc Andre de Seve — 3 years ago
I just bought 2rims with new rubber( bought them cuz it would cost the same as the rubber alone) so I figure I will swap em out on my motobecane... 11mm front axle what is this odd ball size and where or how can I pop em out and but them to 10 mm so everything is more compatible
Marc Andre de Seve — 3 years ago
Finally got the sp94 out for the first ride of this season... Felt like riding on marshmallows with the old rubber... Danger zone.
Marc Andre de Seve — 3 years ago
Yo totally on a different subject.. 4th pic down is that an old cb250 in the background?
Marc Andre de Seve — 3 years ago
Finally got the fork off the motobecane... Who woulda known how pesky it is to change out for the first time
Marc Andre de Seve — 3 years ago
Any thing for a motobecane... Or old Honda cb... What's in the corner.... Far corner
Marc Andre de Seve — 3 years ago
Finally got the beast up and running... After a tune up she starts up like that.. Seems to have way more pep then my other motobecane.. Can't wait for no more snow for a top speed run
Marc Andre de Seve — 3 years ago
Not to worried about surface rust... As long as they are true and straight.. Price?
Marc Andre de Seve — 3 years ago
I would pay for shipping... If in good shape let me. Know