Results 1–30 of 2297
Murder Legendre — 2 years ago
PM sent on seat, handlebar switches and speedo.
Murder Legendre — 2 years ago
I need to make a couple of corrections to the list:1) Reflector, headlamp, CEV x2 should read: "Reflector, headlamp, CEV & Chrome trim ring, CEV". These items are shown in my General Discussion thread.2) The cylinder, piston & head are for a Vespa 50 Special scooter, not the mopeds.So far, no offers on these parts.. so I'll split them up if necessary. They need to find a new
Murder Legendre — 2 years ago
Yet more.. a CEV headlight ring & reflector. These may be generic CEV parts for a variety of models?
Murder Legendre — 2 years ago
And what looks like a clutch / driven pulley assy.. from the same machine or not?
Murder Legendre — 2 years ago
Thanks very much. It would be helpful to have more precise info for listing purposes.Does this look like a crank for the same machine? There are two in the lot..
Murder Legendre — 2 years ago
This cyl & head came with the lot of Vespa parts which I acquired. Almost all of these parts are for the Bravo / Ciao / Grande series - but these items are still a mystery.Cyl bore is 38.2mm / pin is 12mm. The mounting holes between the head & cyl line up, but now I'm not sure that they're a pair.Any idea where these belong? I need to ID them so they can be sold.Thanks,Bill
Murder Legendre — 2 years ago
Found a few more items that I'd overlooked:Piston w/pin & clips, 38.2mm (stock bore) ASSO x1Rings, piston, 38.2mm x3Carburetor, SHA 12.12 5A9, DellOrto, mostly complete less top & choke (U, EXC.)Air cleaner assy, gray & white plastic, w/clamp, fits 32mm air horn, marked Gilera
Murder Legendre — 2 years ago
** PLEASE DO NOT PM ME - EMAIL ONLY: drlegendre@gmail.com **** Rather than sell these off one at a time, I'd like to solicit offers for the entire lot. Here's a list - I don't have a parts manual for these bikes, so not all have part numbers.All items are FOB St Paul, MN **Piaggio / Vespa partsThese are all for Ciao / Bravo / Grande unless noted.Reflector, headlamp, CEV x2Speedo dri
Murder Legendre — 2 years ago
** Please do NOT PM me - Email only: drlegendre@gmail.com **Selling an NOS copy of the 1976 Haynes Puch MV, MS, M2, M3 & VS 1968-on Owners Workshop Manual. This title is out of print and becoming rare.This copy is NEW, with only very slight wear from storage & handling.$25.00 Includes shipping to the USA.** Please do NOT PM me - Email only: drlegendre@gmail.com **
Murder Legendre — 2 years ago
*** EVERYTHING IS SOLD - PLEASE DELETE OR LOCK THREAD - THANKS! ***
Murder Legendre — 2 years ago
*** SOLD - PLEASE LOCK OR DELETE THE LISTING - THANK YOU! ***
Murder Legendre — 2 years ago
Bump bump..$85 + Ship
Murder Legendre — 2 years ago
And thank *you*, glad they arrived safely.I've had several small packets like yours go missing in the last couple of months. I suspect temp fill-in workers at USPS are shoving items into their pockets.From now on, everything goes in a 6x9 with extra stuffing, if at all possible.. make it too large to easily conceal.> Jay Rivett Wrote:> ---------------------------------------------------
Murder Legendre — 2 years ago
*** Complete front hub is SOLD ***Other parts still remain. Make reasonable offers..
Murder Legendre — 2 years ago
I have an brand new OEM Puch center stand, if that's what you're looking for. It's best to email me, my address can be found in my Buy Sell listings.If you can't find it, you can try PM.
Murder Legendre — 2 years ago
Bump - $100/obo
Murder Legendre — 2 years ago
*** BOTH PAIR ARE SOLD - AD CAN BE LOCKED OR REMOVED - THANK YOU ***
Murder Legendre — 2 years ago
*** NO PM - EMAIL ONLY PLEASE - drlegendre@gmail.com - THANKS ***For Sale: Two sets of US-Made Midwest Mopeds wire saddle baskets.Set #1 (medium) is 13"x14"x8.5" open.Set #2 (large) is 16"x14"x8.5" open.Both fold & lock to ~2" thick.These attach directly to the rear rack & license frame of most Puch mopeds and similar models. They can also mount to a simp
Murder Legendre — 2 years ago
All CEV switches are sold & shipped. Thanks everyone for your interest.
Murder Legendre — 2 years ago
I have NOS CEV light & horn switches $28 including shipping to USA. Sorry no engine stop switches ATM.Email me drlegendre@gmail.com please, no PM as I'm not here often.Thanks,Bill
Murder Legendre — 2 years ago
*** Please do not PM me - email only drlegendre@gmail.com - Thank you ***NOS Puch Moped dual seat.There are some 'dents' in the cover where some object must have rested against it. These will probably improve with time & use.$120 / Best Offer + Actual Shipping.*** Please do not PM me - email only drlegendre@gmail.com - Thank you ***
Murder Legendre — 2 years ago
They're all packed up. Maybe ask Mopedlar, he'll have two of them in a few days.> Quattro Audi Wrote:> -------------------------------------------------------> Anyway you can scan for repro?
Murder Legendre — 2 years ago
**CORRECTION**The $45 price on the hub assy does NOT include shipping. Cost will be actual shipping rate, which varies based on your location.Sorry about this..
Murder Legendre — 2 years ago
GENERATOR COVER **SOLD**BOTH HEADLIGHT REFLECTORS **SOLD**2-SPEED CABLE & FITTINGS **SOLD** SECOND SET OF FITTINGS ONLY REMAIN
Murder Legendre — 2 years ago
Thanks for that.Reason I'm asking - a member with a "plain" 1979 Maxi wants to buy one of my factory service manuals, but I only have 1978 and 1980/81 editions. So naturally, I want to send him whichever of the two is more appropriate to his bike.So it's the 1980/81 edition, then?Thanks!
Murder Legendre — 2 years ago
Which series does a 1979 Maxi fall into? Is it more like the 1978 models or more like the 1980/81 models?Thanks!
Murder Legendre — 2 years ago
IF THERE IS INTEREST, I CAN SPLIT THE LELEU HUB INTO TWO GROUPS - A HUB/AXLE ASSY. AND A BRAKE PLATE/SHOE ASSY.IN THIS CASE, EACH ASSY. WOULD BE $35. SORRY, BUT SHIPPING HAS GONE CRAZY
Murder Legendre — 2 years ago
All "Rather be.." bumper stickers are SOLD
Murder Legendre — 2 years ago
This is a NOS EPCO moped carrier which mounts on the rear of your vehicle. It's complete with the mounting hardware package.It includes the following optional accys (Not pictured):1) One pair of NOS EPCO support bars which prevent the bike from bumping the rear of the vehicle on hard braking.2) Two pairs of NOS EPCO nylon cinch straps that secure the bike to the carrier.** Stock Photo **$65 o
Murder Legendre — 2 years ago
The 'girls' decals are SOLDTwo 'Rather be riding..' decals remainTwo each 4" & 6" round Puch Decals remainOne 12" Puch decal remainsSeveral of all others remainOne each 8" square Puch & Maxi decals remain