Results 1–30 of 626
On most mopeds i took apart I found sealant all over the head bolt washers. I normally peel it off. I'm wondering what is the professional way of installing a cylinder head once the gaskets are in place and you slide the cylinder head over the studs? Do you just slide on a washer and install the lock washer and nut and torque it or does it really need gasket adhesive?
wow thats high. i live in new york and insured a jawa and a motorcycle for 200 dollars a year.
someone complained that the bicycle motor has no lights but it does. the coil comes with an extra wire for lights
> Dirty30 Dillon wrote:> -------------------------------------------------------> As someone who does a lot of time-consuming design stuff for 3dP, I> would say your best bet may be to start learning 3d modelling and such.> If you can at least create the STL's than paying to print is easy, you> may just need to pay for 5-6 prints as tests before you get the design> correc
im not sure what carburetor you are using but sometimes there is a pin hole that is clogged on the carburetor. it should be at this locationhttps://www.bing.com/images/search?view=detailV2&ccid=LhP%2fX9WQ&id=A5E35822A524FA71E300BB543A2549F11FA7A7BA&thid=OIP.LhP_X9WQQlsK8XvUXsDZrwHaC6&mediaurl=https%3a%2f%2fmyronsmopeds.com%2fwp-content%2fuploads%2f2014%2f12%2fCleaning-a-Dellorto-id
do you use any levers when you try to pedal start the motor?Does the motor make any odd noises or does it crank smoothly?
yea i understand that the bicycle idea is stupid but if you had one of these motors on a moped, it would only cost 100 dollars and you can go 30 mph consistantly. How much does it cost to modify a moped motor to obtain 30 mph consistantly? its probably 350 dollars. I do admit that the bicycle motors have flaws too. The chain gets jammed so you need to read the blogs on how to file the sprocket som
thats a running puch is 900. his puch isnt running
do a web search for 2 stroke racing carburetor. The air filters from them fit the dellorto well. Also there is an airbox you can 3d print for the dellorto carb.
i was thinking of building something simular. did it atleast go 30 mph?
What grit sandpaper range does everyone normally use to remove gasketsWhat grit if using electric tools too?And also what if the gasket is on good such as if a metal gasket eithor melted on or was jb welded on?
i probably have alot of parts that you would need. im in new york though. not sure how you would recieve it.
I never saw an Android double din stereo that cheap. I also look for navigation and XM but them stereos get expensive.
I never saw poster sellers when i went to college. Vendors did give away gifts to get my email and i got spammed my whole time in college because of it.
The engine was just serviced and it runs mint. It will eventually need a link taken out of the chain but it works excellent as is. Goes 25 mph. Way less than 1000 miles on the odometer. I switched to the CDI ignition so the lights wiring just need to be plugged into the CDI.
I was just there a couple months ago. I was going to say have a good trip but I'm guessing it's almost over by now. I got a little annoyed there because almost every time i was in a store without a mask, some idiot walked near me and coughed.
I'm not sure where the best place is to post this but the private message function isn't working on this site. Basically you can only send a message. All replies show up as blank. Did anyone else notice this problem with the site?
Years ago I was talking to a girl online from another country and asked if she lived near any ghettos and she stated yes there are plenty of old houses in my town. It took me a while to think of a better definition for her.
Is this the morning m01 engine?
I should have one. If i find it I'll sell it.
That's crazy. I don't see how a thief found value in a project bike.
I'm interested in the side covers
Wow almost like my old trike. I had an 85 honda 70cc in red. Too bad i sold it because its value went up afterwards. I think it's worth about 1000.00. i wonder how much michaels was sold for.
Cylinder diviting has to be on that list. On a serious note I think it just ruins your cylinder though. Also even if you mention something secret, the average mopedder would do it wrong anyway.
> Also, side note, if your retirement is all tied up in mutual funds, you> should really diversify. I hope that you are one day able to retire.---True but I went through 5 years of college for business with the promise of a hundred thousand dollar grant at graduation and it was taken away by graduation. I learned how to run a business but the tax rates are way too high to even attempt it. My
> Les B. Wrote:> -------------------------------------------------------> Truth told, I'm embarrassed to say I'm from Ohio. Particularly from the> Rust Belt. How anyone from here who works for a living , on welfare, or> scraping to get by; would support him is unbelievable! But I'm glad the> silent majority of the country held tight and we took back Democracy.>
Someone mentioned that some sicknesses have been going around for hundreds of years. People are still even catching the chickenpox. So I see covid should be handled 1 of 2 ways. way 1- end all restrictions and let everyone that wants to get sick become sick within the next month.way 2- Have everyone completely quarantine again. shut everything down for a month around the world and covid would end
Are they really worth more now? I believe I still have mine in my closet somewhere.
Did they ask to see your war face alot?> Papa _ Wrote:> -------------------------------------------------------> I need to find the pic of me from basic where everyone says I look like> Private Joker. But here’s some classic stuff. Not PC so the kids w/o the> stomach for that should be warned.>>