Results 1–30 of 87
sketch mo — 7 months ago
This guy knows what he is talking about. Let's see what you got? They say he was able to use less electricity by using high voltage pulsed DC at a very low current. People say the it's not sustainable electrically but don't listen to them, electricity is everywhere. You can stick two pieces of metal in the ground and get electricity, or an antennae to ground. It's not a lo
sketch mo — 7 months ago
Ha Awesome! I think I have heard of that guy. My crazy uncle from Ohio used to talk about him. Ya he smoked mad crack and meth and drove a VW bug across the US
sketch mo — 1 year ago
yo slew. your shit is dope. we should make some crazy moped vids. I met you at bakers dozen. ... Rosco... you are wild and I like how you write! take care of yourself bro! whats a moped?
sketch mo — 2 years ago
Maybe we can work out some cool trades.
sketch mo — 2 years ago
Hey mark.. LOL, I will try it!I have a bunch of relays around that have three prongs, so that might work. Anyways its working well enough for me right now, PDcom so im not digging into it.I just thought some body at least put a one way diode at some point for flickering. Hell, it might make it worse.I read about old tomos with "elimination device" maybe that is what i am going for?I hope
sketch mo — 2 years ago
I got everything hardwired on a 2 wire cdi. only one light wire.. everything works.press the brake and light turns off.. good enough.. the other light gets brighter so thats good. anyways thats not the problem.I wired turn signals. see how long that lasts..I have read that it may be good to put a resistor and ground in the line coming out of the flasher relay because the relay is not getting enoug
sketch mo — 2 years ago
check the carb
sketch mo — 2 years ago
I just did a really nasty one but it works so far. I cut the wires and twisted them all together with another wire and soldered. Run the wire out behind the stator and your good.My solder gun was shitty and wouldn't bond right, so I epoxied it into this ball of crap and melted electric tape over it. get solder and flux and a good gun should work.then You have to find some way to insulate it
sketch mo — 2 years ago
This is a vanity build gone wrong. please dont bloW!I put this engine back together a little different. This time I did the intake straight in with a 2 pedal malossi. Right now I have a 97 main and a 50 idle. It starts and idles really well but doesn't seem right about the mid-range.I plan on putting a jammer in here soon.21mm phbg and intake70cc parmakit reed cyinder casematched to a55par
sketch mo — 2 years ago
Hey thanks for all the suggestions. I got it to do something crazy! so I switched out the reed for a malossi I had. I got an ad carb which wasn't exactly what i thought but I made it work, maybe better. Also I have the 55 starter, 50 idle and 97 main.I should get a video of this. I choke it whatever.. when I kick it the stator moves counterclockwise right.. well when it does turn on the
sketch mo — 2 years ago
Anyone have an idea why I am not getting any fuel to the cylinder. I have fuel in the float, all the jets are clear. I tested compression and spark. still no fuel on the plug.I am going to tear it down and clean it and stuff, but if there are any suggestions let me know. ... oh i guess it might be clogged past the jets.. I just need to clean it I guess but if anyone knows anything else let me kno
sketch mo — 2 years ago
i vote for condenser
sketch mo — 2 years ago
I got one running good now. it has 15:15 sha , stock straight intake drilled out to about 14mm. malossi reeds , fuego pipe , the tire i got on it is actually geared down for torque. it still goes about 35 on a flat. 60 jet
sketch mo — 2 years ago
also have indian bits with the frame and engine, swingarm, carb, petcock.. but they are crusty etc.. engine turns fine and is complete. may partMagnum tank is caked. $100 for each + shipping.Indian frame is real nice. heavy. expect to clean the tank a little. Decals are nice but might tear them off anyways.All the frame needs is handlebars, controls, front forks, wheels and axls. Do you have thes
sketch mo — 2 years ago
110 shipped, will wash out with power washer before sending. should clean up nice.
sketch mo — 2 years ago
see picture for reference, also need side cover http://www.myronsmopeds.com/wp-content/uploads/2012/08/1980-Cosmo-Colt-3-with-Morini-M1-engine.jpg
sketch mo — 2 years ago
pmd
sketch mo — 2 years ago
good idea! butt camera in the list
sketch mo — 2 years ago
I think I might have one or need one mine might be a 3 ill look
sketch mo — 2 years ago
LOL!
sketch mo — 2 years ago
what are those wheels from?
sketch mo — 2 years ago
im using it on honda aero 150
sketch mo — 2 years ago
hey need this
sketch mo — 2 years ago
That makes sense, actually I think the guy said his developed leaks first too. Well, I guess I am going to put it back in then. thanks good luck with sale.
sketch mo — 2 years ago
Hey I just rebuilt a tomos a35, It's got a lot of new parts, It should be reliable and a little zipppy, There are a few things more to clean up but it sounds great. I would take 800 for it. Let me know if you want pics.Also building a maxi right now so that might be a few weeks till that is all straightened out.oh ya I'm in baltimore. could possibly deliver. Good luck with your search.
sketch mo — 2 years ago
>> > dont take oil injector off because it will seize but they dont say> why.>> > ..>> Because it lubes the crank directlyI get that but what about in principle.. Don't we take off our oil injection on mopeds? Don't they run fine? Why will this scooter seize and mopeds wont? I am not convinced that it will seize.. If I had to guess why I would say because it
sketch mo — 2 years ago
Hey I have one of those, Just started trying to get it going. all those aeros apparently have a wierd wax thing in the carb that goes bad. It melts and adjusts with temp.. something like that. I am going to try to take the oil injector off and get a new carb. Some other scooter ppl say dont take oil injector off because it will seize but they dont say why. ..
sketch mo — 2 years ago
Weld me a swing arm or somethin.. bumpo