Results 1–30 of 524
Uncle Yoseph — 4 days ago
Lookin to try a hi comp head for a 50cc a35 ported stock cylinder.I’ve heard Puch hi comp heads work as well. If ya have an extra one let me know
Uncle Yoseph — 5 days ago
You should have enough with that, if not just go the Vermont route
Uncle Yoseph — 5 days ago
Yea doesn’t seem like it’s gonna fit in there, may just trim a fin down. No bend seems to get it to fit right
Uncle Yoseph — 5 days ago
Will bend some more and keep messing around with it
Uncle Yoseph — 5 days ago
I can’t get mine to fit on a stock a35 head, any way to do so without grinding away at the fins?
Uncle Yoseph — 6 days ago
What is that exhaust? Never seen something like it
Uncle Yoseph — 9 days ago
Uncle Yoseph — 9 days ago
What’s the best way to check this?I was thinking something transmission related but could be wrong
Uncle Yoseph — 9 days ago
Doesn’t appear to be the cylinder knocking on the spark plug or any of that. Never ran into this before and runs perfectly fine and has amazing low end but just is so loud and clicky if you’re not in the throttle
Uncle Yoseph — 9 days ago
At idle, if I give it no throttle there is a very distinct clicking that isn’t there on my other a35. I have a video of it but can’t attach it here.Stock cylinder, estroil, sha 15 15mm intake.Stock clutches
Uncle Yoseph — 12 days ago
How does the electric start work? That’s so cool
Uncle Yoseph — 17 days ago
Stock Center mount hits pipe, wondered if anyone had an extra side mount that works on this swing arm
Uncle Yoseph — 24 days ago
Do you have the main drive gear? Believe it will work on my a35
Uncle Yoseph — 24 days ago
Looking for a main drive gear if anyone has one laying aroundThe Tomos from hell continues as I noticed this groove in just about every tooth on the main gear and going to run as is but looking for something to swap it out with when the thing totally explodesHonestly never had this running yet so no idea what the previous owner did it it but yea let me know if anyone has one they’d be willing to s
Uncle Yoseph — 25 days ago
Alex do they work with stock Tomos forks? Just swap the bottom end of the forks and you’re good?
Uncle Yoseph — 25 days ago
Do a55 style bolt up to this frame and work with the fron wheel?Only swaps I ever swapped were Puch ones years ago.
Uncle Yoseph — 25 days ago
ill keep those in mind! waiting on hearing about a set of stockers from a buddy
Uncle Yoseph — 25 days ago
BUMP
Uncle Yoseph — 25 days ago
Can you send a link?
Uncle Yoseph — 25 days ago
yea i saw those too, will most likely just go make a brace down teh road for the ebr's with vertical mounting for drum brakes... unless i can perform some magic tomorrow on these forks with a torch
Uncle Yoseph — 25 days ago
yea i reached out on there but didnt really get much response, and a lower oem set from treats is even more then ebrs.. and they dont make a solid brace and im missing the fenders so feel like going tomos parts will cost me even more if i got them off treats.
Uncle Yoseph — 26 days ago
Don’t think mine are going to straighten out, we’re bent when I got them.Looking into ebrs but it seems like they don’t have slot of options for stabilizers (the lack of one is what caused mine to twist and bend it appears before I got it)Is there a better options then ebr’s or stock that will work with the brake tab on the stock wheels?Anything bolt on or are ebr’s just my best chance
Uncle Yoseph — 27 days ago
Bump
Uncle Yoseph — 30 days ago
used bi turbo for a35 tomos and 2 lever choke sha 14.12's.also have 2 12mm a35 intakes (one w/ oil injection one without)one of them is missing the spring on the choke. other parts are solid.shoot me a pm with price if interested will post pics later
Uncle Yoseph — 4 weeks ago
ill run then stock for the time being Graham, and get those dos pads and rebuild later down the road
Uncle Yoseph — 4 weeks ago
plan on running blues in both with stock gearing, advice from cranks based on the set up. will see how that goes and then maybe re-gear if it feels needed.
Uncle Yoseph — 4 weeks ago
So I’ve never messed with gearing before, and plan to run it on blue springs before I do that. But does it make that much more of a difference with gearing?I’m not looking for top speed and I’d be good with 45 honestly but getting there as quick as I can.I guess the question isWhat does goin from stock 26-22 to like 28-22 really get me?
Uncle Yoseph — 4 weeks ago
Still have the bars ??
Uncle Yoseph — 4 weeks ago
Lookin for stock Tomos targa if possible, but whatever works honestly. Looking for something semi cheap.Realized the bars had a flat spot and that’s why I couldn’t tighten my controls.Pm me if ya have an old set that aren’t totally roached
Uncle Yoseph — 4 weeks ago
currently waiting on sha 15 intake and 90mm pipe from cranks, and have been porting out the stock cylinder. Will run blue springs most likely in both clutches. iust never really understood the difference of the 65cc vs the 70cc other then the 5cc any advantages to 65cc graham?