Results 1–30 of 31
michael riggs — 4 years ago
Where can I find a headlight like this
michael riggs — 4 years ago
Bump**
michael riggs — 4 years ago
Looking for a set of spoked 16" wheels that will fit a tomos lx
michael riggs — 4 years ago
Maybe I'm not as cool as all you fonzs, but I never get secret treats... :(
michael riggs — 4 years ago
Finally got her all finished, all the chopper guys better watch out..
michael riggs — 4 years ago
I know this is an old tread but did it ever get resolved
michael riggs — 4 years ago
Not to be a buzz kill but I think that's a Minonite, they are the loose version of the Amish
michael riggs — 4 years ago
I like my rod and piston from a nice rare almost endangered wood. From the deep jungle of Borneo
michael riggs — 4 years ago
Will this fit a Targa lx
michael riggs — 4 years ago
Anyone have some idea? I just don't want to buy one online and not have it fit
michael riggs — 4 years ago
Sorry to bother everyone again, I want a different tank for my Targa. So what else will fit?
michael riggs — 4 years ago
Do you think I should go chopper banana or single chopper
michael riggs — 4 years ago
I will fine for everything once it's mocked up, but keeping the tank like this, I will either go nana seat or a single chopper.Any other suggestions
michael riggs — 4 years ago
Like this
michael riggs — 4 years ago
So I have decided to mount the take parralele with the frame, so it will be angle down, I will fab up some brackets.I'm going to get either a nanna seat or chopper seat and put that on, with some ape hangars on the future.I love the look of the tomos with out a top tank but my doesn't have the integrated frame tank, so I'll have to make due
michael riggs — 4 years ago
I should have mentioned that I will add a cross member but the original question was to either keep the seat level with the tank or have it at an angle.Fyi of course this isn't the final project it's a mock up to see how everything can fit and what needs to be modded.Thanks for all the replies
michael riggs — 4 years ago
Since this was a Targa, with a bulky tank, what options do I have to make this a better rig.
michael riggs — 4 years ago
I would like opinions on how I set up my tank and seat pan, I would like to figure out before I fab too much.The one is the puch tank at an angle for the fuel petcock and the seat with the rear down to continue the overall angle.The second is with the seat leveled and the tank still angled.The last would be to make the tank level and the seat level. But I have a concern that the fuel valve won
michael riggs — 4 years ago
Is that what this is, a revival?
michael riggs — 4 years ago
16" wheels
michael riggs — 4 years ago
Will these fit a tomos Targa
michael riggs — 4 years ago
Sorry they are 16"
michael riggs — 4 years ago
I am looking for a replacement for the 17" mag wheels I have on my tomos a35. Looking either to trade or buy with shipping to Honolulu, 96818.Thanks
michael riggs — 4 years ago
Got it all figured out. Thanks
michael riggs — 4 years ago
Also I found that piece had come off just now. So what's the best way to get the clutch off without breaking anything?
michael riggs — 4 years ago
Is there a way to reset that without taking off the gearing
michael riggs — 4 years ago
So first off I took my engine case off originally to inspect for wear and it had a little leak so I need to buy a new gasket. After I receive the new gasket I proceeded to put 1 shim on the pedal shaft assembly and put the case back on the engine. I then put the two other shims and springs on the outside of the case on the pedal shaft installed the pedal. This is where I run into problems, my shaf
michael riggs — 7 years ago
Found one thanks guys
michael riggs — 7 years ago
Need a tomos targa or tomos vin plate. Mine was sandblasted off.
michael riggs — 7 years ago
Pics didn't show up