Results 1–30 of 35
> Aaron Blair Wrote:> -------------------------------------------------------> How bout you try adjusting the idle screwI only saw one screw on the bing carb. I figured it was the air mixture since there was a cable adjustment knob right next to the carb. I’ll look again though.
> ♣Slew Foot♣ Wrote:> -------------------------------------------------------> Make sure the decomp isn't leaking.>> Rerun the ground to the engine and tail so the frame is ground.They deleted the decomp for some reason and put some jankass bolt in it.
Turns out the carb mixture screw was turned all the way in. I dialed it out and started slowly moved it in and then it hit like a champ. Now just to figure out the idle. Any ideas? I tried adjusting the throttle cable at the carb and it just wouldn’t run at all if I messed with that.
Thanks. Could there be anything else worth replacing while I’m ordering from Treatland?
So I’m torn between getting this Sachs westlake to run correctly or parting it out.It fires up and runs good but then it dies after running it a while.Not sure if the jetting but previous owner said it was jetted to run without an airbox. Plus it has an aftermarket pipe. I’d rather just return it to stock but that’s gonna take some money and at that point it makes sense to part it out.Fuel is ge
Parting out a west lake. Has a 504 motor that roars for about a minute but cuts out so idk if it’s an issue with the jetting or condenser.I can verify the compression with a tester.Shipping from Tennessee. PayPal/Venmo your call.
Ya. This thing roars for about 35 feet then dies.
Looking for an airbox solution for my westlake. Previous owner was not running it and I want to.
So I ended up buying an sha dellorto. I bought the one with a cabled choke. Can anyone verify do I need to buy an extra cable to fit the batavus?
Thanks. Is the float/needle combo the likely culprit in an overflowing carb?
I need a rebuild kit for an encarwi. Any help or solutions welcomed.
I need these 2 parts please. Spring and cam.
$250 as is complete with title for either one in Tennesseee. Or for parts. Neither run.931-808-5623
Have a hear complete express with title. And qt50 with title.For pics text 931-808-5623
Less than 100 miles on carb. Name brand Polini with pull choke. The newest they make. $95 shipped.
I scooped up this Tomos silver bullet and the Carb was totally disassembled. Put it back together as best I could. My question is how to make sure the choke assembly is put back together. And how to verify its on properly. Saw a video on YouTube and it appeared the choke was actually locked into place which made no sense to me.
I need the connector from the carb to the airbox.I need a left side cover (flywheel side) for a kickstart only (no pedals) motor.I need each side blue chain guard/dress up panels.In Tennessee.
What year?Maybe carb/air box. Pics?
I'll try my best to get some pics up asap. Sorry. It's no ghost ;)
Thinking of parting out. What's a running motor and titled frame go for?
$45 shippedNo top capNo needle slide tubeNo needlesOnly main jet
No top cap.No needle or needle slide.No choke.
Bike has compression but no spark.Accepting reasonable offers. Consider shipping. Have some cred over on Hondaspree.net. Not looking to make a fortune. Just trying to fund another project.Gas tank is awesome on the inside.Will be happy to provide bill of sale of needed.Paulgonzo23@yahoo.com for questions and much faster response.Pics herehttp://s344.photobucket.com/user/paulgonzo23/library/glove%