Results 1–30 of 145
Joshua Duke — 5 years ago
Thanks man
Joshua Duke — 5 years ago
Middle part of the triple tree, make sure your bottom tree bearings are on there in the correct groove (groovy baby)usually this is where one puts dust cover, slide the middle part through the frame then bearings and then the giant handy bolt ( grooved Nut ) comes down, cant remember if there is a dust cover on top bearings but I dont think so. Hope this helps.
Joshua Duke — 5 years ago
Trying to find the correct bearings razze 16" snowflakes they fit the rear axle and I have a bigger axle for the front, basically Need ID and OD of bearings so I can get this AMf looking bettah.Trolling is welcome but please help me figure this out first, and as always thank you for your time.
Joshua Duke — 5 years ago
Got 1 maxi blue with polini reeds magnum ebrs 4501 red maxi stock 250Misc moped shit for sale alsoLocated in chicago hit my inbox for better pics and info
Joshua Duke — 5 years ago
Hey any one in the Chicago area working with a bike for like 150 to 300 buckaroos?
Joshua Duke — 5 years ago
I dont have pics with the vins unfortunately I gave my kid the phone with all that good info as a present, life at its finest.
Joshua Duke — 5 years ago
Thanks man, hopefully I can get at least one of them back.
Joshua Duke — 5 years ago
3 bikes stolen in Chicago 312 532 2122 if you see them confiscate please , also a Lil blue scooter with a55 kickstart.
Joshua Duke — 6 years ago
I figured, I just thought I would ask, so the same premix my maxi gets :).
Joshua Duke — 6 years ago
Hey guys I apologize as this is not a moped, albeit it looks like one. I have a Yamaha mg1-T and the manual says to use 20 : 1 two stroke oil, the fresh rebuild and new piston and rings. I have the saber, I am afraid of throwing this in there, any you guys have a bike like this and what ratio do you use and which brand. And remember Josh loves you :P, In other all information is appreciated; I hav
Joshua Duke — 6 years ago
Alright, now should I redo my bearings and seals with a new crank, or keep old crank on there. I want to do this right, within the first 2 pistons I got a 15mm bing clone I am probably gonna buy should I get a rito and bearings, and za50 springs? I don't want to eat clutches like pastries ( or pizzas for that matter) thanks in advance.I got a bullet on it already so I think im good on pipe.
Joshua Duke — 6 years ago
Thanks
Joshua Duke — 6 years ago
I basically am looking to see if anyone ran a e50 with bullet 64cc polini with a 12 bing what jet they were around.
Joshua Duke — 6 years ago
Putting on 64cc kit just have a 12 bing Where should I start my Jetting at. I gotta use the lil carb for a month I got a 84, and some 70's
Joshua Duke — 6 years ago
:)
Joshua Duke — 6 years ago
http://www.treatland.tv/puch-polini-kit-bing-intake-p/polini-bing-intake-215.0384.htm ?????
Joshua Duke — 7 years ago
I have a Bullet and I know its awesome for stockers but will it be for this kit, thanks in advanced.
Joshua Duke — 7 years ago
Prefer to deal in Chicago but will consider shipping if total about 150 us and under, thank
Joshua Duke — 7 years ago
Still have?
Joshua Duke — 7 years ago
What kinda oil you premix with?
Joshua Duke — 7 years ago
Not tuning related but try a little richer oil mix maybe? helps in winter or altitudeDouble check with these dudes, for I have not wizard beard or litter bike as of yet.
Joshua Duke — 7 years ago
Can I mod stock intake to make it work. ? On polini, or I'll have yo find one? Its new to me lol
Joshua Duke — 7 years ago
So I have found a few kits in my budget these two I'm leaning towards polini needs intake other kits whole, which one should I choose. Recommendations my fellow Americans, trolls, and mopediers
Joshua Duke — 8 years ago
thanx will tomorrow
Joshua Duke — 8 years ago
I have followed MA instructions cleaned everything new needle new gaskets did the bend the brass ya digg and I still am leaking lots of fluid, more so than I was before Changing gasket, Can I put a different carb on stock maxi? or is this just my life now, chalk full of drippy wonderfulness.
Joshua Duke — 8 years ago
Buy BOTH!! Someone will make you a car payment one day ;)
Joshua Duke — 8 years ago
So I could make one with an apple a screen and a lighter, oh wait thats a pipe
Joshua Duke — 8 years ago
Nah Thnx tho I am probably gonna find a small Motorcycle one and debrand it
Joshua Duke — 8 years ago
Good Idea, I am gonna try my idea and see if it works, runs good etc. if not that will be the way to go.
Joshua Duke — 8 years ago
Gopeds have trunks? newho pic ,price?