Results 1–27 of 27
Braap Master Mope — 1 year ago
get two of these and this. you can now replace the crankshaft bearings & seals, crankshaft (assuming you already have it), as well as the pedal shaft & main shaft seals.then watch this and have at it.
Braap Master Mope — 2 years ago
still looking? i've got original spoked wheels on my magnum im willing to sell. good condition, i'll take a pic today if you want to check them out
Braap Master Mope — 3 years ago
has anyone tried this 3d printed adapter to use a NSK NAC handpiece on their dremel?
Braap Master Mope — 3 years ago
PM'd
Braap Master Mope — 3 years ago
damn, ive got the exact same problem and am also in need of a maxi frame.im going to go ahead and piggyback off this post; if anybody has their hands on a maxi frame with decent tank condition please send me a PM.that CList maxi bare metal frame is perfect for what i've got in mind. i'd gladly pay cost + shipping for a frame like that
Braap Master Mope — 3 years ago
Braap Master Mope — 3 years ago
check out mopedwheelie on instagram, theyve got the wheelie game figured outthis dude almost eats shit while getting fresh with the one handed wheelie
Braap Master Mope — 3 years ago
also whats the tank look like inside?
Braap Master Mope — 3 years ago
im looking for a maxi frame. where abouts ya located? would you be interested in shipping to CT?
Braap Master Mope — 3 years ago
PM'd
Braap Master Mope — 3 years ago
looking to buy a maxi frame. my friend bought a beater maxi off craigslist; all the parts are good except the tank is rusted to shit.located in CT and would consider meeting anywhere in the tri-state area & rhode island
Braap Master Mope — 4 years ago
do a victory lap around the cubicles when shes done
Braap Master Mope — 4 years ago
lunch-break office wrenching?? brilliant idea. cool office. nice bike. enjoy man!
Braap Master Mope — 4 years ago
the general 5 star gas cap can easily be popped open without a key.grab a small screw driver or a pick, push the cap down towards the tank, and use the screwdriver/pick to push back the latch that holds the cap closed.you have to get low and look between the cap and the tank to see the latch, but once you know how to do it it's cake.push towards the front of the bike to release the latch.
Braap Master Mope — 5 years ago
thanks guys, ill hold out for the fourth.im on the mailing list and ive drawn up the cart im going the check out, i just want to plan this expense rather than getting caught flat footed.
Braap Master Mope — 5 years ago
i've got 3 mopeds in various stages of full-rebuilds. i want to buy all the remaining shit i need at once, snuff out any excuse to let a bike sit in the basement for another day, and get these greasy whores on the road. but that's pricey.so when's treats next sale? don't they do an annual thing in july?i feel like they do a summer thing but time can be slippery.
Braap Master Mope — 5 years ago
yeah im going to smash it flat through the hole like ken suggested, thanks guys
Braap Master Mope — 5 years ago
it's from a Minarelli V1 that i rebuilt for a friend, as you can see its pretty bent on one side. more details below, but here's my question: how bad are the potential consequences if i run this until i can get my hands on a new clutch?i've assembled the engine with this inside and when i pull the clutch cable and turn the pedal shaft, the clutch engages and the crank turns and the
Braap Master Mope — 5 years ago
I've done two complete rebuilds on Tomos engines without an issue. Now I'm doing it for a third time and I've got a problem. When I put the crank case together and tighten the five bolts on the clutch side that tightens the case around the crankshaft, the crankshaft itself binds up and will not spin freely. When I loosen those five bolts a little, the crank spins just fine. so it se
Braap Master Mope — 5 years ago
I've done two complete rebuilds on Tomos engines without an issue. Now I'm doing it for a third time and I've got a problem. When I put the crank case together and tighten the five bolts on the clutch side that tightens the case around the crankshaft, the crankshaft itself binds up and will not spin freely. When I loosen those five bolts a little, the crank spins just fine. so it se
Braap Master Mope — 5 years ago
FUCKING MONEY.a lot of the shit we're arguing about does not matter. shit that does not have an impact on 99% of the population, let alone a negative one.but you know what is an issue? MONEY. WASTING OUR FUCKING MONEY IS AN ISSUE. Seriously, fuck the left and fuck the right, and fuck wasting the hard earned money of the American people.We are being played. Arguing about shit that doesn't
Braap Master Mope — 5 years ago
FUCKING MONEY.a lot of the shit we're arguing about does not matter. shit that does not have an impact on 99% of the population, let alone a negative one.but you know what is an issue? MONEY. WASTING OUR FUCKING MONEY IS AN ISSUE. Seriously, fuck the left and fuck the right, and fuck wasting the hard earned money of the American people.We are being played. Arguing about shit that doesn't
Braap Master Mope — 5 years ago
I just finished a build, 70cc alukit on a stripped down 94 targa, and put a little less than half a gallon in the tank and took off on the first run.I should have tightened the petcock first. Two blocks away it popped halfway off and DUMPED gas all over my engine head, delicious two-stroke fumes filled my nostrils but I had panic in my eyes.kakakakKLINK! I could feel that poor little piston slam t
Braap Master Mope — 5 years ago
new haven here... lez ride yo!
Braap Master Mope — 5 years ago
did you get all this stuff already?I've got everything you're looking for. I live in Ct but I drive to RI and sometimes MA frequently. I'd be willing to meet halfway(-ish) if you're still interested.The fenders & covers might be a little dinged up, but nothing a can of paint can't fix. I can throw in an extra couple jets too, pretty sure i've got some in the 58-6
Braap Master Mope — 5 years ago
one of the stator screws popped out and got tossed around by the flywheel, scraping the coating off the copper wires and fusing them together. so my question is: are these coils fucked? what could/would happen if it tried to keep using it?please forgive my ignorance; i dont know shit about electricity aside from the magnet spins around the coils to produce the black magic that makes my ped go braa
Braap Master Mope — 8 years ago
slewfoot has the right idea. this seems to be the best solution, its a simple idea but ya gotta have the means...(empty tank/¿frame?, drill holes, weld fittings, and such)check out this build: