Results 1–30 of 99
Yeah I put an aftermarket kit on my ebe075 I forget witch part# I used but I will look it up big thing is these motors have a bigger diameter crank and longer stroke 45mm. But if you look for a stroker kit that is ment for close to 45mm you for the ebe050 you can get most of them to work. I just had to make a 10mm or 11mm spacer and everything lined right up perfectly had it running but have to pu
I had huge vintage Kawasaki fairing bolted to my motron was fun but in the wind/turning it was wild how much it affected the little light bike
I should still have a set let me check this weekend
Was trying to keep it mild...
I put a destroyer, a cast iron derbi metra kit, spacer from space, titanium weights and stiffer springs on mine goes 45 quick but needs a better carb the stock Sha can't keep up and it always what's to get hot. So an intake and carb are up next
That pic doesn't do its justice showing how angled that Sha is mounted at and still works fine. Killer bike and even better rider.
A windshield washer sprayer pump would work perfectly for that. They are cheap/easy/compacthttps://www.amazon.com/dp/B000CB69ZW/
amzn_assoc_tracking_id = "mopedarmy-20";
amzn_assoc_ad_mode = "manual";
amzn_assoc_ad_type = "smart";
amzn_assoc_marketplace = "amazon";
amzn_assoc_region = "US";
amzn_assoc_design = "enhanced_links";
amzn_assoc_asins = "B000CB69ZW";
amzn_assoc_placement = "aduni
They came on a bunch of snowmobiles and one motorcycle came with one too
Tomos Tx50 with modified snowblower track drive. Puch mag x. King cobra 50cc race bike
Loaded up heading to the first pentagrom rally. 5 bikes, 2 pop-up tents, grill, and a bunch of other equipment
The casting on that looks as good as any name brand kit you buy online. Came out amazing. This is too cool
I had a 1985 silver maxi with the headlight fairing that had sealed bearings only in the rear
Fantic sprinter my wife bought me for a surprise wedding present was by far my most expensive but most expensive i have bought was a MBX80
Batavus Mondial i put together for a raffle bike. Was so fun to ride. I miss it
Is this on the mag x kick start bottom end? Blue springs are weaker than the stock kick start springs
When I first saw your post I figured you must have been copying an mtd yard tractor design and using one of these pulleys. I see now it's definitely simpler and cheeper the way you went about it. Very rad. If you use a pulley like this in place of what you are using you could double your cvt range tho and still have manual over ride control
Awesome..... get a video of it idling and reving it up with your timing light hooked up. Let's see it its got a curve!
Bumpthis was a fun thread
Zack it rad and has hooked me up on a few things and just in general a super stand up dude.I fuck anyone that thinks they are entitled to anything. Buy a China scooter where you can buy everything off Amazon and you can pick 2 day shipping.
I put a small thread in one from a hydraulic system on the side cover of my v1 race bike and it melted the shit out of it. And just leaked
Yeah I probably wouldn't but I would entertain the thought. The nsr is not a restored peace by any means yet ether
You say no trades but how about a 1985 nsr250r mc11?
Yup definitely a bunch of people in CT but yeah no one can seem to ever get together. We got a few people that are down to ride around southbury and a shit ton of bikes
Can't wait for more info/pics
Looking for a blue Honda express plastic cover. The louvered one that is derect below the seat. Have mad shit to trade/PayPal/cash thanks
http://mybikemanuals.com/yamaha/yamaha-dt/ 1989 dt50w link has a PDF for the dt50lcI have two black dt50lc and that are a blast
Sweet! Looking forward to it
Bolt on kits wood be rad I used this ( http://www.maxiscoot.com/kit-admission-big-valve-mxs-racing-stage6-highflow-system-mbk-booster-bw-s-ms-pkmmxs010-1.html ) to make mine and then made two adaptor plates and a bunch of porting
I literally just did some mods to my expre II the past two nights. My bike would do 26 and that's it stock. I put a bored sha 14-12(to 15) on and decked the head widened the exhaust port 2mm on each side and matched the rectangle port to the circular gasket. And I also added a window in the jug and piston in the same place as a dr 70cc kit would have. then cut up a hobbit proma pipe and welde