No no this is limited version but only work on high tuned engine.Yes they are weights, for fine tuning.Now i am working on own KTM SX clutch model and my model this CNC but with screw that you can adjust the spring tension. 😅
For now are sold (complete)Only fiew pcs of set are left in stock with no center hub.No we are only seller for our clutch.
Thank you I hope you are happy now with the clutch 😛.Thank you for your trust here in Europe i think i sell around 100+ sets cnc clutch.It really takes a lot of test with springs but when the thing works as it should, every effort is rewardedIn most 60% everyone buys only for 1 gear as they have tuning somewhere between 50-65ccThose customers who compete in races always have 2 gears (1st and 2nd
🤣 👌For now, the engine adds enough power, but of course the plan is a water-cooled tomos a52 engine, and we are counting on 20 horsepower there.
Nice 👌 yes this is working very good but it is lot of testing on diferent springs to get right tune
Engine block with reed intake is from my friend, this engine win 50cc drag race on 150m.But i insert it because of picture of clutch.It is video in IG page - frcomoto from this friend tuning moped
HelloHere after a long time came again a series of clutch with carbon coating.The clutch shoes can be used in 1st or 2nd gear. Inner rotor ignition is recommended for ideal power gainSprings from scooter (piaggio /yamaha aerox etc..)Of course it is possible to buy a complete 1 Race gear with springs and core (limited stock)Link https://www.frcomoto.si/en/clutch-tomos-a3-a35-a5/14011-sklopka-kpl-fm
Shipping is now yes 35€ for small order ia big but from big order under 250€ you have free shipping.Clutches are now in stock againComplete 1 gearOr only 3pcs of cnc clutch pada with carbon lining in stock (30/40 pairs) for 1 and 2 gear.Video of sprinter 74cc. It was in bedroom for 4 years now but it still runing like New.Video : https://vm.tiktok.com/ZMLcdrwEy/?k=1
A new series F.M Racing clutch - Now they are waiting for SF layer - Tomos A35 - A5In previous testing, I test new springs , in 1 to 2 gear it shift in range of - 13,400 RPM , then my counter showed EEEEEE (Error) on range of 15.000 rpm because is only to 15.000 rpm ...I missed that mark "only 15,000 rpm" when I took out the stock in my shop .Now I'm waiting for Parmakit RPMToday, I
I sold quite a few sets in the USA this year ... I driving my clutch for 2 years without problems .. Yes it out of stock i waiting for new supply ..In previous testing, I test new springs , in 1 to 2 gear it shift in range of - 13,400 RPM , then my counter showed EEEEEE (Error) on range of 15.000 rpm because is only to 15.000 rpm ...I missed that mark "only 15,000 rpm" when I took
Check my clutch on : http://www.frcomoto.si/en/clutch-parts-clutch/7648-cnc-clutch-fm-racing-for-tomos-a35-a5-3-pcs-.html?search_query=cnc+&results=28In my shop, cheap shipping !
WelcomeI Alen Vodušek from Slovenia, otherwise I present my project I work for our company. We have a name in Slovenia, the company name is Frčo Moto Store.( http://www.frcomoto.com) We are business partners with the Puch shop / Tomoshop. We have over 2000 parts for all Tomos.The project I started to work 15.05.2012Moped ass scooter is made of ass (SPEEDFIGHT 2)First picture:And the very first ap