Anyone know what size or what I can use for replacement. I was not being careful enough when rebuilding mine and one went flying in the shop. Lost forever.lmk.
Ya. Was rebuilding a Carabella, came with a minarelli stubplane. No bueno.Shipped to 60616.Thnx.
Yep. I’ll be there. Can hold it for you.
Hey all. The following parts have been updated.Garelli 12mm round style (x1) - SOLDOG puch Gila reed block w/ reeds - SOLDAs for lead time, I'm unexpectedly crazy busy this week with work (doubling up on all my shifts Tuesday-Friday with barely any time to get over to where this stuff is stored. MOST LIKELY EVERYTHING WILL BE SHIPPED BY SATURDAY.Will follow up with DM's/shipping #'s
Sale Pending locally. Will update if that changes.Thnx.
UPDATED LISTINTAKES & Reedblocks:Puch BING 14mm Round & Square (x2 of each) - $25 eachGarelli 12mm square style (x3) - $10 eachGarelli 12mm round style (x1) - $10Minarelli/Italian 12mm Intake (x2) - SOLDTomos A35 Stock 12mm reed intake - SOLDOG Gila intake - (x2) - $20 eachOG puch Gila reed block w/ reeds - $25 PENDINGDoppler Gila 4 Petal Reedblock (no reeds) $20Morini M1 stock reedblock w
Cafe Style Seat Pan. Looks to be MLM style. No mounting hardware/brackets. - $40 + Shipping.Puch Pinto/Swinger Rear Rack - $30 + Shipping.Agrati-Garelli Frame - Make offer (this will suck to ship) Can also part out???Puch Rigid Forks - No Top Plate (might be somewhere) - 60$ + ShippingPuch Maxi Forks w. top plate speedo & horn - $60+ShippingBosche Counter Clockwise Magnetos (x2) - $25 each sh
Not sure. Sale pending on this, though.. If that doesn't go through you're next in line!> Bruce Zapper Wrote:> -------------------------------------------------------> Stock Hobbit exhaust w/ heat shield- $20, Do you know if that is the> same fit for a PA 1?
WHEELS:BLK 17" SnowFlakes w/ rear brake plate/axle. No bearings/axle on front wheel. w/ some MC11 Sava's on them. - $150 for the pair.Italian Spoke wheels (?) Brake plates Comes with axles/bearings and a 33t rear sprocket. Sava Tires 2.5x16 - $100 for the pair Some surface rust.Some other Italian spoke wheel, rear, with a destone tire and a 33t sprocket. No brake plate. $50Have more
Hello. Trying to cut down on cost/clutter and move out of my storage zone.These parts are mostly leftover from someone else's shop that they were going to pitch, that somehow ended up over at a shared space, but then eventually it became solely mine. Now, I'm basically trying to move out and no one really wants to pick all this stuff up. So it's being liquidated.You pay shipping. De
Puch Maxi Sport Roller FS. 250$ OBOSnow Flakes w. rear sealed bearings, Short sporty seat. BMX bars, upgraded throttle, Magnum EBRs, Del 21mm, EBR headlight brackets, lowered rear sprocket (forget how many teeth), momentary kill switch, hardwiring ready to go.Located in ChicagoWould rather sell the whole thing as is, but will consider parting out if it doesn't get picked up.
I don't own a Tomos, so I'm afraid I couldn't see if it fits.Price includes shipping.
Bumps.All prices are now WITH SHIPPING INCLUDED.
Bump for hack n weld specials.All prices are OBO. Happy to entertain all decent offers.
Boss Fuego/Jammy - puch - 45Boss Bullet - puch - 45Custom MLM Cali Chamber with a nice baffle - formerly on a maxi - SOLDAlsil Quiche - derestricted & modded to fit on a pinto SOLDBi Turbo - don't remember where this came from - 45Homeot 6p(?) with Puegot header. 100Also pictured -EV Racing Turbo - Formerly mounted on a Seabring (M1) w/ thic header - 100Treats thicboi pipe - Tomos (I thin
From top to bottomBoss Fuego/Jammy - puch - 45Boss Bullet - puch - 45Custom MLM Cali Chamber with a nice baffle - formerly on a maxi - 80Alsil Quiche - derestricted & modded to fit on a pinto SOLDBi Turbo - don't remember where this came from - 45Homeot 6p(?) with Puegot header. 100Also pictured -EV Racing Turbo - Formerly mounted on a Seabring (M1) w/ thic header - 100Treats thicboi pipe
bumpwould do 200 on this minty boy.
Putting out some feelers here:COMPLETE V1HS engine with needle bearing stock crank.250$ + Shipping.PM me.Thanks.