Results 1–30 of 89
Pippin SMOG — 4 years ago
True I did just swap cdi boxes but it is still on original one from the 80s lol I'll try that
Pippin SMOG — 4 years ago
Well after changing the gas back to regular I'm still having major issues running. It was running just fine when I brought to my new place. I've adjusted the needle the main jet within 90-100 still fuckin up. I have the right atomizer and idle jet w-7 needle. Still nothing and I feel 80s range is too lo but I do love about 1600 ft above sea level??
Pippin SMOG — 4 years ago
Well I dumped the gas and added regular gas that seemed to help but then realized my carbs mixture screw was stripped so that could be the issue as well cause my bike has had trouble variating fully
Pippin SMOG — 4 years ago
I got a hobbit with the dr kit, proma, 19mm phbg blah blah blah. So I recently got the bike pretty much tuned and decided to get some non-ethanol gas since everyone says its alright to use. I've looked up a bunch about it and there doesn't seem to be any performance differences between the two, but it is the only thing that has changed within the past day. Now since I put said gas into
Pippin SMOG — 6 years ago
Got y'all
Pippin SMOG — 6 years ago
Hey errbody!! SMOG is going to do one more run of our old design!!! I have a few people already waiting (I haven't forgotten you) thanks for your patience. After this last run we will probably do another design. If your interested hmu. Shirts are $15 shipped U.S. looking around next month to have the next batch done. Thanks y'all
Pippin SMOG — 6 years ago
pm'd
Pippin SMOG — 6 years ago
Pippin SMOG — 6 years ago
Complete bike. Will part out but would prefer to do it it in whole pieces(ex. whole motor, frame, wheel set, etc.) Not sure what it needs to run, timing is what I was told after it was re-built. I'll post pics tomorrow. holla holla holla
Pippin SMOG — 6 years ago
burp
Pippin SMOG — 6 years ago
Preferably everything but the engine. Got it? Lemme know
Pippin SMOG — 6 years ago
Funkenet . Wrote:-------------------------------------------------------> Send me your best hot dish recipe and if I make it> and find it to be satisfactory, you will have my> consideration.I have many many recipes but due to my obligation to my new job I am not allowed to share.... :( sorry bb I could send you a bangin squash casserole reciepe if ya like
Pippin SMOG — 6 years ago
Hmmmmm i never knew we were supposed to send 2 packages out. Got chu this year bb
Pippin SMOG — 6 years ago
Maize BLK Wrote:-------------------------------------------------------> SMOG SQUAD CAN SUCK A BIG PHAT DICK! THEY FUCKED> ME IN THE SECRET SANTA EXCHANGE LAST YEAR!What I like to put in and around my mouth shouldn't really matter here...
Pippin SMOG — 6 years ago
I mailed our shit to whatever address i was given.
Pippin SMOG — 6 years ago
Pippin SMOG Wrote:-------------------------------------------------------> I'll post pics later tonight but I'm trying to> sell/trade my totally stock hobbit with all the> fixins. Hi-Beam Lo-Beam, speedo, blinkers, tail> light, brake light. Runs!!!!! Pretty cool little> bikeSOLD!!
Pippin SMOG — 6 years ago
also looking for a complete hobbit ignition
Pippin SMOG — 6 years ago
I'll post pics later tonight but I'm trying to sell/trade my totally stock hobbit with all the fixins. Hi-Beam Lo-Beam, speedo, blinkers, tail light, brake light. Runs!!!!! Pretty cool little bike
Pippin SMOG — 6 years ago
Got this one. It's perfect. PM me if your interested
Pippin SMOG — 6 years ago
it has honda bond on both sides. I'll snap some pics. I think I just rebuilt it wrong somehow
Pippin SMOG — 6 years ago
So I just rebuilt my hobbit got everything back together. I have compression spark and gas. I took stock carb off and put in a 15.15 with the AV7 intake from treats. I can get the bike to start and go full throttle but it doesn't not idle and I have a leak were that plastic bushing is. My question is. Does anyone know where to get those or make them up?
Pippin SMOG — 7 years ago
Just checked the weather. What will happen if it's as bad as it says it will be?
Pippin SMOG — 7 years ago
I will post pics tonight. Sorry ya'll I've been real busy at work this week
Pippin SMOG — 7 years ago
I have a kitted A35 engine for sale. It's all complete and works just fine. Has a 70cc tccb Puch kit on it and a 15mm intake. no carb included. I used this engine for a while and just don't need it any more. Also have a targa fame, swingarm, mag wheels, and tank (no seat) I could part with as well. I'm asking $200 for the engine and $150 for the frame shit. Intersted you know what t
Pippin SMOG — 7 years ago
I've some how lost my needle retainer for my VM 20 bolt on. I've emailed treats, called Sudco and Mikuni does not make this part separately from the carb. I put up an add to buy one or maybe somebody's junked carb, but I have low hopes. Any way I could make my own? Any ideas would be super helpful thanks
Pippin SMOG — 7 years ago
I some how lost this very basic part. Treats doesn't sell them and Sudco tells me Mikuni doesn't sell that part individually. If anybody has one laying around or even in a shitty Mikuni that doesn't work but has that part in it I will buy. Thanks
Pippin SMOG — 8 years ago
wow nice it even says on treats which gasket and how its for fixing my exact problem!
Pippin SMOG — 8 years ago
So I picked up a tomos with a 70 puch kit. The bike worked fine except the top end had major air leaks but still would turn over. I got new gaskets and I put them on and when I put the head back on the piston slams into the head and stops and won't return. It's a A35 kickstart. Any advice would be sweet
Pippin SMOG — 8 years ago
should I heat it before I drill to loosen them up or heat it and tap it on the end first?
Pippin SMOG — 8 years ago
so just do this and if it doesn't work open the case and reset the bearings? I think what I did wrong is that I put the bearings on the crank and the put the case on When I took it apart thats how it looked but against my better judgment I put everything back together anyways