Results 1–30 of 75
Makes sense. Appreciate the reply. Thanks man
Thanks I appreciate it. Wondered if it was something I could take on or not. I did some wiring on my old tomos but wasnt sure how complex it was.
Eat a dick bitch. Guy I bought it from did 60 plus on it ahole. Showed me the video of him next to his brothers mustang. Thing rips. Never did I say I was an expert. Just got it 3 days ago.
Hey guys just picked this 1976 puch maxi up. Need to add a brake light and some turn signals. Could anyone help guide me in the right direction of what I need to do this. I attached some pics. The engine was done by tomahawk mopeds and is out of my wheelhouse. I owned a tomos before so this is all new to me. If you need any other pics let me know. I know the headlight is hardwired. Thanks
Mine has done over 60mph set up was done by tomahawk mopeds in Cali.
Hey Dave looks like you have an awesome line up there. Do you sell any of your mopeds? I'm over in Seminole now, used to live in south Pasadena close by you!
Would like to just hook up to the front. Where would you tap into for that?
https://www.treatland.tv/tun-red-tail-light-p/tunr-tail-light-red.htmhttps://www.treatland.tv/puch-polini-kit-reeds-p/puch-polini-reed-213.0017.htmBarely used these items. Polini Reed Kit was on my Tomos once for 5 minutes then never used again. Taillight was used for short time and then I switched to LED lights. Pretty sure the bulb still works as well. One of the bolts is missing to attach to
Hey guys want to put this on my 2002 Tomos Sprint I have been having trouble with my headlight bulb blowing at higher speeds. All my other lights are LED, so I have no problem with them. Here is the voltage regulator down on link below. Got it from treats trail tech reghttps://www.treatland.tv/trail-tech-voltage-regulator-p/trail-tech-regulator.htmNot exactly sure where I hook the yellow line into
Added this LED Taillight to my sprint. Only have it wired up as a brake light. Have it grounded and brake line connected.https://www.treatland.tv/vertical-fixation-clear-LED-tail-light-p/vertical-fixation-clear.htmThen after a few days all my lights burnt out. Headlight, speedo light, and regular taillight. Did I wire something wrong? Any help would be appreciated thanks.
Seems to be coming from the.little handle.
Hey guys just wondering how hard it is to change out petcock on the tomos sprint its an 02. Anyone ever done it? My stock one is leaking and needs to be changed. Ordered this one from treats. Any advice or tips would be great thanks.https://www.treatland.tv/tomos-cock-a35-petcock-fuel-valve-p/tomos-petcock-a35-cock-sprint.htm
Sorry guys everything is Sold!
The MLM intake and VM18 didn't work for my tomos. Had clearance problems on the clutch cover and my pedals hit. I also didn't see how the needle was adjustable on the VM18. The main jet was different from the other Mikuni carbs as well, which was a downside for me. I also needed to change out my throttle cable to get this setup to even work. All in all alot of modifications and not a b
I think the 16 is better, it is nice they use the Dellorto jets too. I had more success tuning them. The tuning on the VM18 is tricky. I couldn't get it to work with my tomos sprint. However I had more trouble with my intake than the VM18. I just think the 16 is better for a mild build.
The MLM intake wasn't long enough. Had to use a coupler to get it to clear the gear casing. Then it got in the way of my pedal. Didn't want to have to take off my pedals. Just wasn't performing like I wanted either.
Hey guys I have the VM18 NEVER USED, purchased from treats less than a month ago. https://www.treatland.tv/mikuni-vm-18mm-p/mikuni-18mm-vm-round-slide.htm Didn't work on my tomos so I need to get rid of it. I also have the K&N filter from treats https://www.treatland.tv/K-N-RU-0100-dellorto-PHBG-air-filter-p/kandn-ru-0100-filter.htm. This was never used either but the top has a small
Picture worked perfect! Thanks so much man. If you ever need a something part, jet, etc. and I have it. It is yours!
Thanks for the help man I really appreciate it! Not quite sure what you mean when you say it seats into the controls. I get that the hook goes onto the throttle tube into the notch. The other end that sticks up where does it go exactly?
I am using a mikuni vm 18. I see where the hook goes into the little notch. Its just when I get it back into position and put the hook back into the notch it still doesn't want to go back into position. I just bought a new spring on treats, might need to be replaced? Just never put one back on before.
Hey guys having trouble getting my throttle spring back on correctly. It isn't making the throttle come back into position. Is there a specific way to install this? Throttle just seems to stick now. Any help would be rad. Thanks
I have a 2002 Sprint, it vibrates in first gear usually. But I don't usually feel it in my pedals. But I know what you mean about the vibration making you feel like something is wrong. I just don't worry about it now.
https://www.mopedarmy.com/forums/read.php?7,3176694,3178596#msg-3178596This will help.
Have you tried down jetting? 68 seems pretty high for what you have. I would try a 62. Just a thought. But a quick check of your exhaust gasket would defintely be smart. Have you tried derestricting your stock airbox instead of running a Uni filter. I did this and was amazed at how much quieter mine was running and my top speed and midrange torque improved versus running an airfilter. I had t