Results 1–30 of 71
I'm not sure how asking someone that may have bought one of these before what a reasonable price could possibly be spoon feeding.... I guess that's why you're called crazy wayne, not makin much sense.
Thanks don! So how much should I offer for this ped?
Does it just have an after market seat, gas tank and handle bars then?How much should I pay for this ped? What would be a good deal?The add says::For sale is a good running dependable moped that tops out at 28 mph but can easily be made to go faster with performance parts and a little effort. It already has a peitcard cdi ignition, 14 mm sha carb, 14mm intake, and the square hi-comp head."sho
I have no idea what this moped is! can anyone help. Also is it worth anything?
Thanks for the help! that looks about right. However, if it is going to cost that much I might want to just upgrade the carb...
I was just nervous about doing my first port job. My apologies. I will not post anymore.
Probably in between fall off and full out Hollywood blow off
If i were running my moped too rich, could that have anything to do with the pipe blowing off? or are these things un related?
any advice on how to secure the front tab? I torqued it down very hard as well as locked it to the sub frame it feel off once again. securing the tab i guess is my next option
I have read all there is to read about porting... Trust me its been days. My question was has anyone ever sucessfully added a kit to a trac? It seems as though it is not as easy as adding a kit to say.. a vespa. In another thread I was told to do thishttps://www.mopedarmy.com/forums/read.php?7,2753326,3678295#msg-3678295but it seems as though in the service manual for the trac that it comes stock
Also has anyone ever been sucessful in adding a kit to a trac? I cant find any info on that either.
It looks as though it is already ported in the repair manual. is there more I can add?
Can you port the exhaust of a trac clipper? If so, how? Also can you port match the cylinder with the skirt? Not much information on these.Thanks for all the help!
You are awesome. Thank you so much! one question, what does lap the head and cylinder mating surfaces mean?
did you ever find shoes? I am in need of some
I lied it is definitely the dp50
How do i know where to make the cuts on my cylinder and head? also, practically how much should i be drilling out of the exhaust?
"I also found opening up the exhaust outlet on the stock cylinder helped, mine was cast way off-center with almost a quarter inch of meat on one side."I have been looking forever and i cant figure out how to do this! please help!
Is 150$ a good price for a Batavus starflite 1979? here are some pictures. unsure if it runs.
http://annarbor.craigslist.org/mcy/4514701605.htmlhere is the link
I need a replacement needle for my trac clipper. it is a 1987 and has the mikuni carb. I looked on treats they said they didnt have one. does anyone have any idea where i could get one of these?thanks in advance!
Someone is trying to sell me two solex 3800s. They are in very rough condition but run. how much are these worth?
I cant find any information on which bore kit i could use for the daliem trac clipper and everyone says the exaust on these are good enough.
How do i get it to really rip?!!!!!
I have been searching far and wide and cannot find anything on how to juice up this bike. It has become quite the frustration.
I have a 1987 trac clipper. I think that if I put a bigger carb on i would be able to get some more out of this bike. The problem is I dont know what size the stock carb is so i dont know how to go bigger. I was thinking about buying this one....https://www.treatland.tv/mikuni-20mm-carburetor-p/mikuni-20mm-vm.htmBut im not sure,, I also dont know if this would require me to change the intake or if