Results 1–30 of 181
Sounds like a ground issue, especially when It happens when things get bumpy
Looking for decent Puch E50 engine
Looking for good running Za50
I don’t how I did it but I got it on. Pain in the rear end.
Need Some advice on how to install this 20lb blue clutch spring into my stock first gear. I saw a video of cool plastic orange tool. not sure if anyone mass produces and sells it. Thank you
Dang now I know, I am grateful
Tried that number already, not working
Ordered parts from 1977 mopeds about a week ago and they forget to send me a part. I’ve emailed them multiples times through their website. No response. I’ve tried at least 5 different phones numbers that I found for them online and they are all non working numbers. No phone number on their current website. Any help appreciated.
Yes found clutch spring on treatland and fashioned a clip Retainer, didn’t see one on treatland. And yes the 2nd clutch was already flipped lol. Everything seems to be shimmed correctly. We will see.
Looking for a seat lock for my 86 Puch maxi sport ls 2 , thank you. Could possibly use a universal lock of some sorts?
I also have a 79 pair of blue Qt50 forks if anyone is interested
Looking for a spare parts za50 tranny. So far need 1st gear clutch because one of the springs broke and need one the thin metal keepers for the little cylinders.
Yes one of the thin metal keepers are broken. A an they be found? I also noticed that one of the long springs on the 1at speed clutch shoe is broke. Can those be replaced? Treats and wants 90 for one clutch.
Yes they did , a lot of mud and sludge nasty color fluid
Question, should there be 7 or 8 of these little cylinders?
Yes I’ve watched it twice thanks
Thanks everyone for the help. Plan on inspecting the trans tomorrow.
Now I’m noticing that pedaling forward the magneto will not spin, pushing the rear tire backwards the magneto spins right away. 😕
Not yet, I have no experience working on moped transmissions.
So I finally got spark and timing is good, won’t start. When I try to roll the bike backwards it won’t go and the magnetos starts spinning. Pulling the decomp lever is not doing anything, the decomp lever is not stuck open. Mind you I just got this bike and who know when it ran last. What would make the magneto spin when rolling backwards? Very hard to roll backwards.
Would love to see pic of your Puch
Thank you, yes the one I found is exactly to these specs so I guess I need to do some tweaking and possibly different size spacers and or shims. Or maybe my right side pedal arm is slightly bent inwards.
Thank you! How many spacers are needed?
The Puch maki sport ls2 did not have any cranks or pedals when I got it. I bought a used Puch set of cranks and pedals , not sure what model it came from. The right pedal seems to stage slightly against the za50 case. Did they make a specific size crank and pedal for the za50 equipped puchs? Thank you
Not sure what is going on. Just got this bike. Rear tire is rubbing on the upper right and bottom left against the frame. Something is making the whole tire end up to the left by a few inches. Just curious if anyone has ever had this issue.
Thank you for all the great options! I’ve learned so much from all you wise moped peeps. I wasn’t getting spark but learned from one of these threads how to test the condenser and that I could buy an old vw beetle Condenser at auto store and plug and play, I’m now getting spark!
I’ve tried White vinegar once Before , Shaking it around often and letting it sit over night. Not sure if there is a better method. Thanks
Puck Maxi crank pedal metal key keeper. Small piece of metal that keeps the pedal and arm on the crank.
Forgive the noob question. . Just curious if the 26mm x 1.5 puller will work for the za50? Much thanks