Results 1–30 of 116
that would work i guess, just don't think the neighbor will appreciate it :) :)
thanks for the impute, did what you said before i read your post, but guess what the issue was? the exhaust!!took the back plate of the exhaust and it started right up, the think rips with that off, but of course its to loud, now to figure out what to do about that?might change it out for one on one of the other bikes and see how it goes?or drill a few holes in the back plate? any thoughts on the
I have 3 of these bike, bike #1 runs great, completely rebuilt, no problemsBike #2 same rebuild, new everything like bike #1, but won't start, only has compression of 90# so i must have a major airleak, going to do a leak down test shortly and I'm sure it will start.Bike #3 I am fixing for someone, bike seems to be 100% original. checked compression and it is at 180#, it has the origina
set up my e50 with the timing marks on the flywheel and the casing like i have done for ever, but this time when i put a timing light on it, no timing mark, what am i over looking?
exactly what i need! thanksRobert
In need of a flywheel cover for my Peugeot 103
In need of a Puch Speedometer drive
Chain tensioner and flywheel cover.Is there another chain tensioner that will work on this bike? Maybe a Motobecane one? or some other one?
So,....does anyone have an extra “internal” ignition coil I could buy
No spark in need of ignition coil for m56!
I did and i do :(Thanks for the input, guess it's drop the engine time to get to the intake and clean it up along with the reed valve get it all sealed nicely and that should do the trick, thanks again.Robertp.s. and if i can remember i will get back with you and let you know how it all went.
Won't settle down and idle, racing faster than it should??Shay 15.15 with a #68 JetTried air gas screw, does not do anything, still racesThrottle works as it should, have double checked cable to no availruns great around the neighborhood but when you stop and put it on the stand it just races?Any thoughts?
what size bolt/screw fits to screw the side panels to the tank? it had some cheesey plastic things that were holding it on before but when i pryed of the side panels they broke. i bought new decals to put on but don't want the (whatever) i use to show through when the decal is mounted, any ideas?
In need of a front fender for my 103
thank, might be getting back to you
new coil, new spark plug wire, new cap, good ground, just no spark, only thing I have not replaced in condenser....could that be it??
This is the situation with the head light, nothing to really hook it to?? Will have to figure that out first so for now I’ll pass on the light
looks good to me, the measurement that I have between the mounting holes is 10" c/c, will you check on your end? and then send me the info to send you money (Venmo)
in need of a gas tank for my garelli gransport.or is there a substitute for one of another make or model?
Is the only way to stop the leak is to buy a new float needle?mine seems to look ok, but still leaks.On treatlands they have two replacements, ones a regular one and the other is a spring loaded one which happened to have some pretty good reviews.You have any views as to which one would be the best, I'm leaning towards the spring loaded one. Let me know please if you've used one or heard
You mentioned that a #43 was the smallest jet you had seen in one, which got me curios, what’s in mine, took it apart and it has a #44, do you know if that is stock?
That’s what I thought, and that’s what I’ve been doing, shutting off the pet cock
Have a shay 14.9 carb and it leaks, it’s like the float bowl is over filling. Is there an adjustment for the float bowl like on a bing?
all the parts have been donated to a worthy individual (free) :)
do you need any? there yours, cause I don't need them.What about the triangular piece?
can you tell me what these are and what moped they belong to?
What exactly is the air vent valve that is located under the seat on the frame?Is there a passage from that to the gas tank?Put some cleaner in the gas tank to clean it and started to swish it around and fluid came out that vent? Hmmm?