Results 1–30 of 827
steve millar — 4 years ago
Gazelles and Green Slime.
steve millar — 4 years ago
Flexing.
steve millar — 4 years ago
All new wires besides the tail light run. But if they give me any problems they will go to.I was going to cover the side covers in fake fur once I find a pair, but post a photo of those decals please, maybe I will change my mind.
steve millar — 4 years ago
Broke a few intakes, but got it converted to pull start and running. Take it out this weekend and see what it tops out at. Here is a video of me starting it and running it up and down the street.
steve millar — 4 years ago
Reading hotter or colder then it should?
steve millar — 4 years ago
Watch the video to the end to see this bunny suicide into a mopeds spokes.
steve millar — 4 years ago
Ordered a doppler pully and bearings today, the stock one I had was fuckered making the engine jump from the belt resting at different heights. Probably be next wed/Thursday before I get to blast this now.
steve millar — 4 years ago
Back flip over the handlebars, kickstart it as I land.
steve millar — 4 years ago
Haven't had a chance to blast more then up and down the street this week.But it has very light weights in variator to keep the rpm''s up and it's just starting to pull hard when I gotta let off the gas so my neighbors no complaino. I'll try and get a video up this weekend of it blasting. Still need to go belt shopping for it also. Is the AX30 the best replacement for stock
steve millar — 4 years ago
To much what for the build? I port bro.
steve millar — 4 years ago
Looks like all I needed was a fifth ground, just got some rev action and shut it down cuz the kids where sleeping. Gonna sleep well tonight.
steve millar — 4 years ago
Ran a grounding wire from behind the stator to my frame ground as well. Tried to play with the timing some more, slapped on a new coil but ohmed out same as the others and no improvement. Couldn't get spark on the jog box. Time for some more reading in the AC
steve millar — 4 years ago
Yeah lots of compression and decomp works and showed no leaks when I sprayed it down. Shit just has the faintest spark I've ever seen. Wont even rev up on the stand. Guess ill throw a timing light on it at an idol and see what the box is doing before I replace it to compare with the jog box.
steve millar — 4 years ago
CDI, no condenser.Set timing and checked it a few times at 1.5, 2, 2.5mm BTDC, even tried it at TDC just cuz and nada, swapped out everything but the cdi box so I will give that a go tomorrow with a JOG box. getting plenty of fuel and oil on the spark plug.
steve millar — 4 years ago
Just checked exhaust and nothing is blocking the air flow from one end to the other.
steve millar — 4 years ago
Having same problem on my Moby, it's a brand new Doppler pipe, removed the restrictor washer from the mounting hardware, 15 dellorto and la parti CDI ground to frame and intake stud. The spark is faint but I can see it. Tried a 0k and 5k boot. And no difference, tried different jets and adjusting the timing, can get a nice idol and sprayed it down, no leaks. Just not reving when I give it gas
steve millar — 4 years ago
Thanks, yes I swapped out the white headlight and speedo housing for black ones. Didn't know the side covers would be white with black though, that's pretty damn sick. Would have changed how I did things possibly. At this point I was just hoping to score the correct side covers in any condition and cover them in fake fur but who knows now. See what the world decides to give me in the nea
steve millar — 4 years ago
Came with covers for a different Moby, dont fit right and look silly. Ill be keeping my eye out for some. Have a couple friends with mobys, need to raid their stashes.
steve millar — 4 years ago
Thanks and Thanks!
steve millar — 4 years ago
Rebuilt motor with new roller crank, ported and matched everything, Doppler exhaust, 15 dellorto, CDI but waiting on a new coil atm. Need to find some side covers for it. Cleaned and greased everything up. Welded up clutch, ceramic rollers, new chain, and leather honey. It's about done and going to be loved for many years to come. Ignore the missing magneto nut, it arrived later that afternoo
steve millar — 4 years ago
Needs a basket on the front and ditch that big ugly thing on the back.
steve millar — 4 years ago
Buy some cheap calipers at Harbor Freight or where ever so you can measure shit and know the size of what you need to order.
steve millar — 4 years ago
Just put the seals on the crank and blast. I've had the stock and after market cranks take tons of abuse. Shit flying off your bikes half the fun.
steve millar — 4 years ago
Sçütaur Ręx Wrote:-------------------------------------------------------> Heck yea! Sounds good. I got bored and polished> my rod all weekend. Good!
steve millar — 4 years ago
Congratulations on your upcoming retirement Don!About to rebuild a stock puch maxi to give to my father in law as a retirement present, he has never owned a moped. He says he can retire anytime he wants but he just keeps on working because the money is so good. Maybe a mopeds just what he needs to feel like a kid again and say screw work and finally retire himself.
steve millar — 4 years ago
Ruffians always have sickest swag.
steve millar — 4 years ago
Buy chocolate covered coffee beans, then your breakfast is also your coffee. No brewing bullshit required.
steve millar — 4 years ago
Alot of people just delete the oil pump and premix, but maybe you could try some old castor bean oil n see if it smokes less then what are you using now.?
steve millar — 4 years ago
Snarknnnn
steve millar — 4 years ago
Operator Error!