Results 1–30 of 132
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
buy gasket material at auto store and make gasket it should have an alluminum gasket if not mistaking . good luck and i would clean up old one carb works and got spark put back together and zroooom you go ... can fix on budget if you want....
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
Acually I do the stock one but , them lilttle thing are priceit seems, don't quote me on that as am a newbie! Just that when got this hercules I didn't have carb and when was looking up original carb it was around 70 bucks! But then again that was on ebay!
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
Yeah seen same one might to. Go get that one thought you might have one but yeah I gt this onif you want it I can see how much it will be if interested?
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
Piston and rings good condition needs pedals and pedal arms as for when I bought it ,it was like that I bought this engine to put on a. Bike for some one but they changed mids on bike 55 don't know how much cost to ship 95355 zip I need 504 engine if you have one?
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
Where you live? 55 bucks with. Intake also
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
so i cleaned it out and put 12.12 together , runs and idles but wont go over 15 mph even boggs out also is this carb to much for fa-50??? should i try the 12.10???
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
gt a 505a1 in cali
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
thanks !!! so i should put the12.10 to 4512.12 to 50since there was no 43 in there, switching up a fa-50 and putting intake making carb come side ways, question is which would run better on this bike//?
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
adjust down
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
so i bought these carbs in pieces so i wanted to make a complete carb.... so my question is what size carb do i put on what?? i found tow jets ione says 50 and other one i belive it says 45? not sure but 99% 45, the 12.12 seems to have a big hole in needle and 12.10 and two holes in needle, so what goes to what ??
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
Yeah that is the plan cut off old mounts and put new ones in place, wish I would have known this much work ! But hey I love a challege!
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
Started to but have not cut yet just was marking it off
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
See swoop if you would have answeered this topic before I got this damn engine and as you can see from the fEed back this was the way to go I was considering to put original back on but from what it seemed it was gonna bee easy! But I have to damn near cut off whole mount and weld new one ! I went a lil over my head! Fml doesn't really help me much!
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
I have a 78 free spirit. What size Engine that have?
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
Yup he said would think bout it told him hour could sell off parts and make money there while keep the running fa-50 sounded sweet to him but I only paid if 150 for it all
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
Got him down to 375 but would like to trde my shit ass noped. For that would only. Be like a150 out my pocket!;)
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
Its real! as real as your my wifes tits!
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
Trying to trade a running fa-50 and a bunch of fa-50 parts damn near enouh to build another fa-50 ,hopefully he bites. ! Got all this fa-50 stuff for bout 150 all together
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
What would u pay? Or traDe for it?
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
Where can I gget one ? Or qeustion is what mmodeel does it come off?
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
What would be worth it then?
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
I will have to research what you say
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
OH AND TANK??
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
WHAT DID THE HANDLE BARS FROM OFF OF ?????
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
I LOVE CALI GOOD MEDICAL CANNIBIS !! CALIFORNIA COWS ROCK ALSO MAKE BEST CHEESE!!
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
oooooh that would be so kinda !!!!!!!!!!!!!!!! cough cough !!!
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
what off brand did you go with as i need to get new tires foe my free spirit thanks
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
1977 testi moped...has been my daily driver over a yesr with little problems....... lotsa upgrades!!!!........big ported 50cc kit from treats... tomos beachcomber wheels 14 mill bing carb ....special wizard powerd a55 hacked pipe....bike does 42 mph.... new tires 100+ mpg..... all this and a 19$ registration fee to ur name and ur off!!! just the kit and wheels and tires are worth what im asking fo
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
COUGH COUGH bang bang !! u dead!!!
Art rollin Paper plains!! And Bending Corner!! — 9 years ago
well i took her to work and have to cut out old kickstand and weld a plate to give it some more support it will be a tight sqeeze but i will make it fit and you rite swoop it had a 504 and treats does have one for 8o bucks !, but ifiggured why buy motor when i have this one!! just make it fit!! and bobdobs what model ids that bike??? i will postg some pictures this week of the process!! got mysel