Results 1–30 of 364
Yikes guys, found my mailbox full of good offers, didn't expect this many replies. Just to keep things simple and fair, I stuck the major parts on fleabay last night.
Parting out last years project to fund this years new project.Mags w/ brakes, axle, brake plates with almost new tires and good tubes. (Rear Tire is a Gazelle, 2.5, front is a Golden Boy 2.25)Engine has stuffy crank, high compression head, DR70 kit. Has electric starter (Because right side is from a NU50M). Carb is 21mm dellorto PHBG clamp style carb (Think its a clone if I remember right, if
After the holidays I'm going to buy one as well to play with.http://www.ebay.com/itm/MOTORCYCLE-QUAD-RHINO-Turbo-BIKE-SEADOO-Small-IHI-RHB31-/110896923144?pt=Motors_Car_Truck_Parts_Accessories&hash=item19d1f8c208&vxp=mtrI've also been thinking about toying with this EFI kit.http://www.ecotrons.com/Small_Engine_EFI_Turbo_PNP_kit.html
Crap, thought I was going to score this cheap. Its at 332 greenbacks, hope someone here buys it and takes some good pics.
Almost looks like this one.http://www.chinese-parts-canada.com/turbocharger_fuel_injection.htmlbetter pic here:http://www.madassarmy.com/discuss/viewtopic.php?f=11&t=1573Then there is this:http://www.ecotrons.com/Small_Engine_RHB31_VZ21_turbocharger.html
Might be cool on slower spoked wheel moped.http://sport.woot.com/offers/wheel-writer-bike-light-fx-3-pack#read-more
Sigh... I'll rid it over for you. I'll need about 5 gallions of mixed gas though.
NU50m Crank sold, left is:-Hobbit Odometer-Hobbit Gas Cap-Hobbit Key switch with Key-Hobbit Left Mirror (round, not in pic)-Hobbit Shocks-PA501 Cylinder and Piston, Piston is smeared, but ran well when pulled-60cc Cylinder and Piston, skirt cut off Cylinder to fit PA501 case, but has broken ring on Cylinder. (Less than 50 miles on kit)-Might have a spoke wheel set w/ brake plates, pm me if interes
Sold:All Crank CasesAll HeadsHobbit CDIHobbit CrankLeft to sell:Hobbit OdometerHobbit Gas CapNU50m Crank (I think it would fit a hobbit)Hobbit Key switch with KeyHobbit Left Mirror (round, not in pic)Hobbit ShocksPA501 Cylinder and Piston, Piston is smeared, but ran well when pulled60cc Cylinder and Piston, skirt cut off Cylinder to fit PA501 case, but has broken ring on Cylinder. (Less than 50 mi
Dimitri, I put 17x2.50 tire on the back wheel of my hobbit that was made for 17x2.25. No issues, and didn't have to remove the fender. I think the fatter tire looks better too.
Got it, will ship tomorrow morning to the verified paypal address unless stated otherwise.Thanks!
Rust Removal via electrolysis.Tub of waterRandom amount of washing sodaSacrificial metal rodBig Battery ChargerConnect negative lead to part to be cleaned, and positive lead to sacrificial rods. Let sit over night and come back to find all rust has been magically removed.More info on my site:http://thenetbytes.com/citicar/blog/And even more on this dudes site:http://antique-engines.com/electrol.
Jordan, Looks like Rick might be taking the heads, but if you want the CDI, $20 and I'll cover the shipping.
Rick, that works for me.Listed out:Left Hobbit CaseRight Hobbit CaseLeft NU50m CaseStock Hobbit HeadStock NU50m HeadPaypal or cash, if you want to send via paypal, just send totim.daley AT gmail.com, if via cash, just shoot me an email and I'll hook you up with an addy.
Sorry Cosmo, the nu50m parts I have are all engine related and no air filter housing, only speedo I have is one from a 79 hobbit.
oh, and I have a left side hobbit mirror, not pictured. Might have other stuff too, just message me and I'll take a look.
Cleaning out garage, make offer, will post better pics of individual items if needed.-NU50m Head and Cylinder (Unknown miles)-PA501 Cylinder and Piston, Piston is smeared, but ran well when pulled-60cc Cylinder and Piston, skirt cut off Cylinder to fit PA501 case, but has broken ring on Cylinder. (Less than 50 miles on kit)-Hobbit Gas Cap (From 1979)-Cranks (Hobbit and nu50m)-Stock Hobbit Shocks-
Thats great advice, Thanks man!
On my way back from town, the hobbit started to sputter. Meaning I could be WOT and it almost would sound like it was 4 stroking, then not even fire for a short period, maybe 1/4 second. Spuddered all the way back, barley maintained 25mph. Every once in a while it would get a second wind and wind out, then start to spudder again.I noticed on the way to town, it seemed to 4 stroke down a hi
I've been trying to find some cheap GPS solution so I can at least track it when they take it.
Super nice!!!! Sounds super smooth too! And you recorded it in super tall cinema!
If you find something quieter for your hobbit, let me know! I'm in the same situation, the neighbors think I'm too loud, and its a circuit pipe. I read a while back the side bleeds are a little quieter, donno.....
"very similar set-up...when you figure out mid range studder let me know."BTW, currently 40 Slide, 40 Pilot, 98 main, w7 needle, clip at bottom. If I get the studder out, you'll be the first to know!
I for one am tired of the racism! Just because he is half white doesn't make him stupid!
"whats the point of pedals"I agree, I'd rather loose them. But in my town the cops want to see the pedals. Other than that, I suppose its nice to know you can pedal to the gas station if you run out of gas.