Results 1–30 of 92
Hi! I'm looking for the adjusting pin for the clutch arm? It i brass.Thank you
also fits Columbia, Hercules
I also need an adjusting bolt for the clutch.
hi! i need a header pipe for my 1978 Hercules. do you know where i can get one?
hi i'm looking for a flat bottom carb. for my 1978 Hercules it has a sachs engine. need one that works in good shape. Thank you
hi! like to know where i can get a set of stock rings for my 504 Sachs
Yes i know you moped riders don't like these nopeds. But i'm looking for an aftermarket intake for my 1982 suzuki fa50. I want to put a different carb. on it. i have a big bore kit on it. stepped up the jet,aftermarket filter, cleaned out the muffler. I can only get it to go about 25mph on the flat. A good 20mph up hill. Any ideas? Thank you
looks nice! i can tell you that here in Lincoln, Nebraska there's a shop selling them for $600.00 and getting that for these peddle mopeds. that's not on Craigslist. With low miles you can get $600.00 i think. So check out that market there and good luck
hi! i would like to know if the 505 clutch interchanges with the 504clutch? I looked at the Sachs manuals home manual by brand, and they have no mention of how to adjust or work on these clutches. can somebody help me out on this one? i want to adjust my clutch, before i replace it. i have somebody waiting to hear from me on this. i also looked on wiki i couldn't find anything there ether .
Hi! i see you are making fun of someone, about something. You clam to know a lot about mopeds? But i had ask you if a 505 clutch will interchange with a 504 engine. because they look so much a like, 16hours ago . I got know reply. Why not? If your claim to know so much about mopeds? What i ask you shouldn't be a problem to come back with the info i needed. Ho! i get it he must be a friend
this comes out on the left side of the moped. can someone put a link to a manual for this moped than you
looking for the intake wedge/spacer for this moped Sachs engine. Anyone? Besides treats and 1977 moped, where can one get parts from? Thank You
hi need a starter chain for my 1978 herules . got this 1978 sachs herules for $200.00 all i needed to do was clean the carb run real nice. But it came with out a chain, and side covers. looking for a piar of them , Maybe a cluch too. thank you.
i have a dellorto 14.14 on it. Dipped it, cleaned it sill runs bad. Runs good with this bing clone on it, but touches a fin , but runs good with out a filter.
hi ! i need to ask.What would be a good replacement carb. for this moped?
Yes I know stock for a 1978 Scorpion, Cuyuna is a 16". But you don't understand. The stock wheel got stolen a found this 20" moped wheel setting around . don't have the cash to buy a stock one . The "hubs match". Had a bigger sprocket on it so i put it on. I can't find a good looking wheel anywhere, so I'm using this 20"moped wheel to get it on th
odd ball size. "The hub mach". Don't know what it came off of, but i'm using it on a scorpion, cuyuna . needing a rear wheel to get this moped on the road . I didn't think to look at the size of the wheel when i bought it. I found an old used up 20" bicycle tire, and put it on there "LOOKS FUNNY" so i wouldn't have to carry it around when ever i need to
Hi! I need a rear drive sprocket for my 1978 Scorpion Cuyuna, bolt holes are at 1 3/4" , 4 of them. i saw on ebay that 1978 Columbia Commuter was the same type of hub.
Hi there! I'm looking for a rear wheel. stock on a 1981 Columbia, and or a 1978 scorpion. The wheel has the center of it raised, where the spooks are. Need the hub with everything in it. also. With these two models, and years of moped having the same stile of wheel somebody out there should have one for sale? thank you
looking for a single wire relay for this. It's the one between the frame, and the fender, just above the carb.
i need the rectangle one.
i understand what you are saying there. But come on? When it takes 6 officers to stop on guy raiding down the street on his way home on his moped. They didn't even know the law on mopeds was. The officer had to look it up.. I think not . We are going not guilty on this one . Now think of this one. How much is it going to cost the city in time to make there claim as to why they did this to my
thank you, yes i hear yeah . going be fun one i hope.
Hey! Out there! Be on the look out. my son, Just got a $96.00 + $42.00 court, ticket 11:30pm, here in Lincoln,Ne. they said my headlight wasn't bright enough. It is stock 6v, NO! But not just any 6v headlight, on this moped gives out a lot of light. If you would look straight into this light you'd need sun glasses. Not only that the officers, Yes they're more the 4 officers there,
looking for a decompression chamber clip, for my 1981 Columbia 505 Sachs engine. Somebody took it off before i got it with 160psi. makes it hard for an older guy to start this thing up. thank you for your time
hi need to know will this 1981 yamaha towny cdi work on a n1982 suzuki fa50.?
i need a cdi for this . Don't want to get ripped off. Been there done that. "please" !
no! it was running when the trany stopped working. i haven't opened it up just yet. If the cable broke? wouldn't you be able to just pull the cable out wihtout the end on it? Right? wanting to get an idea the before i open it up. thank you.
hi ! my 1978 sachs 504. the cable you pull to start it, seems to not want to move. will not grabe to start the engine. can you help me, with inof? i have three of these type of mopeds, one needs that cable. besides the clutch perblem. thank you