Results 1–30 of 932
Dave Peterson — 10 years ago
I have a new replacement carb for a 103 Standard. $30 shipped in the US, Paypal only.Skipjaz
Dave Peterson — 10 years ago
Picture of the fenders
Dave Peterson — 10 years ago
I have some new and used Italian fenders in my shed.
Dave Peterson — 10 years ago
Jawa is a four letter word!
Dave Peterson — 10 years ago
I may have some Colt parts in my shed. I think I have a seat, gas tank and misc.Skipjaz
Dave Peterson — 10 years ago
I have a couple sets sitting in my shed.
Dave Peterson — 10 years ago
Nice score Larry. I have owned two and have parts of a third.
Dave Peterson — 10 years ago
I had one just like it that was a running driving machine. I was happier when I got rid of it, than when I got it.
Dave Peterson — 10 years ago
I think I still have the front forks and front tire. May also have a gas tank.I will ahve to look in my shed.
Dave Peterson — 10 years ago
The Hondas are an early version of the Trail 90. They are CT 200's and had two different sprockets on the rear wheel for high and low range. The later Trail 90's had a High/Low range switch on the gearbox.Nice find!
Dave Peterson — 10 years ago
I still have a few parts of a Jawa parts bike if anyone needs them.
Dave Peterson — 10 years ago
Lar,I can't make it again this year, my wife is too sick for me to be away from home. Your rides were some of the best times I have had riding a moped.Skipjaz
Dave Peterson — 10 years ago
I have saved a few mopeds in the last ten years. I may sacrifice one moped to save two or three more. I can't seem to throw anything away.You should see my shed! I am now doing the same for mini bikes.Skipjaz
Dave Peterson — 13 years ago
I use a kit made for motorcycle tanks from POR 15.Skipjaz
Dave Peterson — 14 years ago
Thanks, that does help. I did know if the spring was mounted using the head nut.Skipjaz
Dave Peterson — 14 years ago
I just bought a 1980 Vespa SI and the decomp valve was all apart and in cardboard box with other misc. pieces. Does anyone have a parts diagram so that I can reassemble this correctly? Maybe a good picture of one?Skipjaz
Dave Peterson — 14 years ago
Jay,I could use a bowl gasket. Are you comming to Vermont?Skipjaz
Dave Peterson — 14 years ago
Matt,I am going to look at a QT50 that has no spark, is this easy to fix?Skipjaz
Dave Peterson — 14 years ago
Take what is left of your chain to any motorcycle shop or dealer. They should be able to match it.Skipjaz
Dave Peterson — 14 years ago
I think the problem is in the switch, I will find out this afternoon.Skipjaz
Dave Peterson — 14 years ago
I have read all the old post about Puch horns that are always on and I have the same problem. The only time the horn is off is when I push the horn button. Things seem to be bacwards, this points me in the direction of the switch being at fault. Has anyone had the same problem and fixed it? Skipjaz
Dave Peterson — 14 years ago
Make sure the brake light switches at the handlebars are working.Skipjaz
Dave Peterson — 15 years ago
Service manual says 5.5 oz of SAE 20w/30. I can send you a photocopy if you email me your address. I also have some used parts, but nothing on your list.Skipjaz
Dave Peterson — 15 years ago
I had the best moped ride of my life at Larry's summer ride.He even lent me one of his mopeds to ride! I hope that was not the last ride at Larry's.Skipjaz
Dave Peterson — 15 years ago
Has this moped ever been running? I am in Williston and may be able to help in the spring.Skipjaz
Dave Peterson — 15 years ago
I have a 2 speed magnum engine that has transmission issues, but I think the top end is OK. Skipjaz
Dave Peterson — 15 years ago
The reverse thread nut was loose, but not off. Someone was in the transmission before I bought it. The cover screws were not reinstalled in the proper location.SkipjazP.S. Still a good motor for a rebuild or parts?
Dave Peterson — 15 years ago
I bought a parts Puch moped with a za50 motor. I heard a rattle from the trans cover and when I pulled the cover, I found 6 metal barrels(about the size of a pencil eraser).Any ideas? Skipjaz
Dave Peterson — 15 years ago
One of the two Motobecanes that I am working on had all the bulbs burnt out. They burnt out bad, all black inside with pieces of filament inside, make me wonder what when wrong.I have built one moped from the two and am afraid that I might have an electrical problem. Skipjaz
Dave Peterson — 15 years ago
I have a Pryer conversion that i am trying to get running properly. I started with a #48 jet and it didn't run well, I up jetted to a #50 or #52 (can't remember) The Pryer runs better, but runs best when I put my hand over the air intake.Do I need to upjet more? Who is the best source for #54-#60 jets? I am running no air filter know, will it make a difference?Skipjaz