Results 1–18 of 18
Ben Hoefer — 17 years ago
I have the airsal kit. I did the same. Costantly alter revs. Also, i would ride for about 10 min then let cool all the way. Dont know the purpose, but I heard it was healthy for your ped.Benmeng
Ben Hoefer — 17 years ago
I've got the airsal kit on a puch maxi. The kit never came w/ directions to tune (air/fuel Needle). Does anyone have any info on this? Thanks.Benmeng
Ben Hoefer — 18 years ago
Nope, the piston was right. I figured it out tho. The bushing on the crank side of the piston rod is shot. Dammit. Time consuming fix. Thanks for the ideas paul. ben
Ben Hoefer — 18 years ago
Yeah the cylinder was lubed. The nuts are just tite enough to hold he cylinder in place, then i move the cylinder around while trying to find a nice smooth turnover. I'm stuck here. ben
Ben Hoefer — 18 years ago
I've got trhe airsal kit. The post holes are larger than the posts on the cylinder and head. When assembled, I turn the crank by hand. It turns a couple of times, then binds and is hard to turn. Is this due to poor alignment of cylinder on the block? Thanks for any ideas. ben
Ben Hoefer — 18 years ago
I've got the same ped and kit. I bought the 18 th and ran for awhile. Very poor accell so i put the 16 th back on. Much better low end and decent topend.
Ben Hoefer — 18 years ago
I've got a 77 puch maxi w/ a airsal 70 kit on it. Does anyone have info on the carb? I'm having trouble tuning it. It runs fine, but seems like it should have more power. And it will not idle w/ the wheel on the ground. Does anybody know any good starting points for settings of the idle and air needles. Thanks ben
Ben Hoefer — 18 years ago
Will i be able to rig up a puch maxi exhuast to run on sachs? Is there going to be a differential back pressure issue? i know its kind of ghetto, but i'm trying to get as many peds runnin with what i have. Also, anyone have a sachs manual they are done with and would like to sell. benmeng
Ben Hoefer — 18 years ago
Hello, i'm looking for a good resource for a Flandria Bermuda i just picked up. I'd like to find a shop manual and good parts place. Any suggestions? Thank you Ben
Ben Hoefer — 18 years ago
Hey Charlie, Mine did the same thing. Going 30 or so down a hill, and it just stopped running. I'm in the same boat. No spark. Frustrating. good luck ben
Ben Hoefer — 18 years ago
Any idea what the point gap should be set at? I will also check the key. Thank you
Ben Hoefer — 18 years ago
I was riding and the revs were maxed out. Then The engine died and I have no spark. Did i burn something out w/ high revs? Has this happened to anyone? Is there a quick fix, or should i start digging. Thanks ben
Ben Hoefer — 18 years ago
Hey Matt, i Tried the restricted airflow solution you were talking about. It worked perfectly. thanks. ben
Ben Hoefer — 18 years ago
I have a 77' Puch maxi. I rebuilt the motor w/ seals, bearings, rings, etc... The ped starts and idles fine. When I try to power up, it bogs down heavily. I've cleaned the carb three times now. I think its a carburation problem. Could be ignition. Any advice is good. Ben H
Ben Hoefer — 17 years ago
Hey. I've got what you need. i also have the head if you need it. Came off a working ped. Great shape.
Ben Hoefer — 18 years ago
Hello, I'm looking to buy a set of puch mag wheels that usually came stock on the 2 speed or Maybe Newport. Later on. Ben
Ben Hoefer — 17 years ago
Tim, Dont use my name is bullshit Posts. Thanks. Four Beer Ben
Ben Hoefer — 17 years ago
Previous:86' Pontiac 6000 - leaked fluids, added oil every 15 minutessaturn SL192' S-10 Pick up - good break stands89' chev z-71 - Glasspacks, loud as shit87' Chrysler Conquest - 4 banger w/ a turbo, really heavy92' or so Nissan 240sx - bot for $400 sold for $1200 two weeks later92' GMC Jimmy98' Honda Prelude Type SH - Lotta tickets, sucked in MN winterCurrently