Results 1–30 of 201
cat teets — 9 years ago
vforce3 reeds for your av10 race bike? no brainer, make me an offer!!
cat teets — 9 years ago
make an offer bump
cat teets — 9 years ago
everything but the variator has been sold!$100 shipped for the New in Box TJT variator kit.
cat teets — 9 years ago
$99 + shippingNEWReason I'm selling: I've already got one and the bike this was going on is gone. My loss your gain yadda yadda
cat teets — 9 years ago
These things are killer, buy them so I don't put them into a dirtbike or something silly
cat teets — 9 years ago
replied! box of springs might be pending
cat teets — 9 years ago
Doppler clutch pulley that's still going strong. Also included are some foot pegs, some spacers and circlips. I'll throw in the highy acclaimed 3030 one way bearing that's new in the bag still. That's like a free 30 dollars from me to you!It has some gouges on the inside of the pulley from when my chain flew off during some super high speed ripping, lesson learned: buy high qu
cat teets — 9 years ago
Like new - used these on a ported malossi 70cc engine + polini race case + a 24mm flatslide with internal rotor and it was the fastest moped to 45mph ever seen on this ugly blue rock. I ran these reeds for about 30 miles until switching to 4 petal polini reeds on a 50cc h2o engine. Also included is a stuffer and gasket for your pleasure. These are best for big kits and they are fucking awesome. T
cat teets — 9 years ago
All this stuff is new - outfit your derbi or maybe a hobbit so you can smoke other fools with their stock variators and loose clutch springs.TJT variator for derbis and hobbits (https://www.treatland.tv/TJT-variator-derbi-variant-honda-hobbit-p/derbi-moped-tjt-variator-honda.htm)Maxivar ramp plate that you likely need for the above 6 roller variator (https://www.treatland.tv/derbi-TJT-maxivar-var
cat teets — 9 years ago
sold!
cat teets — 9 years ago
responsificated
cat teets — 9 years ago
Here you've got yourself a standard, throwback, run of the mill RGD racing clutch pulley for an mbk or pug, or whatever have you.It's slightly larger in diameter than a Doppler pulley.Let me tell you why I preferred this to my Doppler pulley on a racing rig.It's currently tuned for a really high revving bike. I ran it on a machined out 50cc polini w-port h2o engine. I tried it on a
cat teets — 9 years ago
Clip ons, Caliper, Doppler enduro crank, and Polini race case are sold.Here's something else you should buy from meNEW Polini race teflon coated 39mm piston for w-port av10 engines. It's a C type. I'm pretty sure this is the last one of these you'll ever see. Try to find one!! $80 + $6 shipping to da 48 statez
cat teets — 9 years ago
all pm's repliedclip ons, crank and caliper are all pending sale.This is the bike a bunch of that stuff was destined for:
cat teets — 9 years ago
NEW polini AV10 race case. When you buy from treats, this is exactly what you get. Reeds, gaskets, FAG bearings. Seals have already been installed along with studs + high temp threadlock. $200 I'll throw in an extra set of seals in case you don't like how I did things.NEW MBK Doppler endurance race crank. Just the crank. $115NEW stock Polini H2O 50cc w-port kit for AV10 motors. Takes an
cat teets — 10 years ago
Sounds good Ian I'll PM you.
cat teets — 10 years ago
bump-a-dumpoh and I have the v-force 8 petal reeds that fit into the polini av10 case. 40 miles on them? If you buy a top end, and the case + crank I'll throw them in the box rather than the stock Polini 4 petal av10 reeds.
cat teets — 10 years ago
Both are the Polini w-port h2o kit for av10 MBK engines. The bottom end is for an mbk av10 as well.I also have the correct low voltage Bosch water pumps, and fancy electrical equipment to make this work very nicely. That includes various capacitors to help power the pump + your lights.
cat teets — 10 years ago
Oh and shipping is not included. I'll give you a quote.
cat teets — 10 years ago
Selling some of the fast parts collection. There's nothing wrong with any of this stuff, other than I don't have the time to work on my super fast mopeds anymore. Everything I'm selling is in very good to new condition. I take very good care of my stuff. All of this is for MBK.Case:NEW polini race case. When you buy from treats, this is exactly what you get. Reeds, gaskets, FAG bea
cat teets — 10 years ago
Jesse, it's the Stephane Wrembel Trio - Jimmy's Bar. Sucks about your tank!! That's a handsome bike you've got.
cat teets — 10 years ago
I'm seeing 30% in da PM let's RACE
cat teets — 10 years ago
yz80/cr80 wheel + cheapo caliper all day long johnnyDoes anyone wanna do that just for fun race at the end with all classes together? Was that determined to be too lame? I think crowded tracks are a blast
cat teets — 10 years ago
sooo much shit talkingI think we should race our moped transport trucks / vans on the track WITH THE HAIRPIN
cat teets — 10 years ago
we racing the track in reverse again?
cat teets — 10 years ago
Mike you should come to the Mammoths weekly Albany ride on Thursdays, 7PM. We meet in Dana Park at the intersection of Lark, Delaware & Madison. We can talk about your sweet PAII then cruise around and enjoy Albany's many fine fried food establishments.
cat teets — 10 years ago
Hey guise,,,,what is th
cat teets — 10 years ago
Yay Lis!!I brought Henry last time and he rubbed his butt on everything, much fun was had. I'll probably bring him again.
cat teets — 10 years ago
Ya we need more french bikes up in the top 3. I got so used to seeing derbis in front I'm building one now. It's a piston port though, but with moby and puch technology!! ayeeee